Tender For Special Repair Of Toilet/ Bathrooms/Kitchens At Bldg No. P-428 (01 To 12) Ors Md Accn (Except Flooring & Internal Elect) Of Bn No 1 In Abdul Hamid Vihar At Mil Stn Gandhinagar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
14 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Toilet/ Bathrooms/Kitchens At Bldg No. P-428 (01 To 12) Ors Md Accn (Except Flooring & Internal Elect) Of Bn No 1 In Abdul Hamid Vihar At Mil Stn Gandhinagar
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge. |
| 2 | M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M & L brick work with old size sub-class ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 5 | M&L rendring 10mm thick on fair faces of brick work or concrete surfaces on walls, finished even and smooth without using extra cement in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for rendering cement plaster 10mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for rendering 12mm thick in CM 1:4 on stone wall surfaces fair faces of brick work & finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed. |
| 8 | Material and labour for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed. |
| 9 | M&L for prepration of old surfaces of ceilling and applying two coat of white wash complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means and preparation for next treatment complete all as specified and directed. |
| 11 | M&L for 1mm thick wall care putty on walls surface incl prepare to surface for next treatment complete all as specified and directed. |
| 12 | Material and labour for existing prepared /newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 13 | Material and Labour for applying Two coats of 100% Premium exterior acrylic emulsion paint (Any shade) on new/old wall surfaces latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. complete all as spcified and directed. |
| 14 | M&L for distempering with 1st quality acrylic distemper of required shade and colour complete, two coats on existing prepared walls surface complete all as specified and directed. |
| 15 | M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified. |
| 16 | M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified. |
| 17 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified and directed. |
| 18 | M&L for polished /matt finished colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado , skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed. |
| 19 | M&L for Glazed ceramic coloured tiles 7-8 mm thick in vertical surface exceeding 0.12 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge. |
| 20 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. and Laid bedded and pointed in any mortar complete all as specified and directed |
| 21 | M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge. |
| 22 | M&L for rounding to edges of stone/granite slabs one edge such as in steps cooking platform , window cill and other situations complete all as specified & directed |
| 23 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge. |
| 24 | M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed. |
| 25 | Material and labour for polished /matt finished colour ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 26 | Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 27 | M&L for machine cut kota stone slab flooring 18-20mm thick in steps, jambs, pillars, window- cills, cooking platforms, floors and like in cement mortar (1:4) including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of kota stone including rubbing and polishing complete all as specified& directed by Engr-in-Charge. |
| 28 | M&L for 100 mm thick PCC 1:4:8 type D -2 using 40 mm graded stone aggregate as in sub base complete all as specified& directed by Engr-in-Charge. |
| 29 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compelete all as specified and directed |
| 30 | M&L for 75 mm thick PCC 1:3:6 type B1 using 20 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed. |
| 31 | Dismantling of cement concrete (un-reinforced) kerb stone and the like of any description of and in any position not otherwise specially provided for complete all as specified and directed. |
| 32 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 33 | Taking down chowkhats (without taking off shutters from the frames) chowkatts n exc 1.5 sqm each complete all as specified & directed by Engr-in-Charge. |
| 34 | Taking down chowkatts (without taking off shutters from the frames) chowkatts exc 1.5 sq. m but n exc 4 sq m each complete all as specified & directed by Engr-in-Charge. |
| 35 | Taking down shutter of any decription exc.1Sqm and n.Exc 2 Sqm complete all as specified & directed by Engr-in-Charge. |
| 36 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for three/two tracks shutters, frames,grills, doors, windows, ventilators and partitions (Fixed portions), slinding windows,ventilators including providing and fixing hinges/ pivots/rollers and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 37 | Supply only 4 mm thick glass sheet any shade tint glass, ordinary quality and glazing with rubber bedding in square & any size in each pane complete all as specified & directed by Engr-in-Charge. |
| 38 | Supply only 3mm thick glass sheet froasted glass, ordinary quality and glazing with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge. |
| 39 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 40 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 41 | M&L for Framed work as in doors or gates of angle , hold fast or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC 1:2:4 type B-0 to match the existing floors/walls. |
| 42 | S&F factory made 35 mm thick plain framed, paneled shutters with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified and directed. |
| 43 | S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed. |
| 44 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified. |
| 45 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 46 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm thick plain colour PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 47 | Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws complete all as specified and directed. |
| 48 | S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 49 | S&F extruded aluminium alloy handles 150mm size fabricated type anodised complete all as specified and directed. ISI marked. |
| 50 | S&F 250 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified. |
| 51 | S&F in repair 18mm thick PVC hollow board both side prelaminated of approved texture as in kitchen cabinet/cupboard ( with shelves and partions) including frame , beading and necessary fittings & fixture like auto closing concealed hinges, 150mm long fancy SS handle, magnet catch etc as per manufacturers instructions complete all as specified and directed. |
| 52 | S&F in repair stainless steel Kitchen plate rack of overall minimum size 750mm x 750mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed.Note : Weight of rack shall not be less than 4.00 Kg. |
| 53 | S&F in repair stainless steel curtain rod of 25 mm dia (in lengths as directed) heavy duty with decorative ball type side brackets supporting hook etc , both ends and pair with PVC rawl plug & steel screws on walls/beam complete all as specified and directed. |
| 54 | Resecuring or easing & adusting without taking down of shutters exc 1.0sqm and n.exc 2.0 Sqm and adjusting with out taking down complete all as specified and directed. |
| 55 | S&F 140mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 56 | Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge. |
| 57 | S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge. |
| 58 | Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 59 | S&F for CPVC PIPE OUTER DIA 20MM Brass Elbow (3/4 X ½) complete all as specified and directed |
| 60 | Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge. |
| 61 | S&F for 20mm bore pipe GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge. |
| 62 | Taking up or down 25mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge. |
| 63 | S&F for 25mm bore dia pipe GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge. |
| 64 | M& L for Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed. |
| 65 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I |
| 66 | Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I |
| 67 | S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed by Engr-in-Charge |
| 68 | S&F in repair for 20mm bore dia pipe Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 69 | S&F in repair for 25mm bor dia pipe Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 70 | Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar upto 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed. |
| 71 | S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed. |
| 72 | S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed. |
| 73 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 74 | S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 75 | S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed. |
| 76 | S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 77 | S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 78 | S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed. |
| 79 | S&F, 110mm bore PVC vent cowl complete all as specified and directed. |
| 80 | M&L, in repair, PVC (SWR) Gully trap 125/100mm ssetting and jointing with cement mortar (1:1) complete all as specified and directed. |
| 81 | S&F, in repair, PVC (SWR) floor trap, with SS grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed. |
| 82 | S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed. |
| 83 | S&F in repair for 15mm bore dia pipe fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge. |
| 84 | S&F in repair 15mm bore pipe fancy type long body bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge. |
| 85 | S&F in repair for 15mm bore pipe angle valves/stop valve ,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed by Engr-in-Charge. |
| 86 | S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed. |
| 87 | S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with intel, ball valve, float and handle including brackets complete all as specified & directed by Engr-in-Charge. |
| 88 | S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. |
| 89 | S&F in repair for 15mm bore pipe fancy type Pillar tap,swan neck cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified |
| 90 | S&F in repair looking mirror 5 mm thick selected quality of any size including necessary moulding , stainless steel cup and washer etc complete all as specified. |
| 91 | S&F in repair tubular towel rail, stainless steel, 20mm dia, ‘D’ type, 60cm long between flanges fixed to wall complete all as specified and directed. |
| 92 | S&F in repair for PVC corner shelves set of 3 and size ( 7 inch , 9 inch, 11 inch ) complete all as specified and directed. |
| 93 | S & F in repair Soap dish, stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete. |
| 94 | S&F in repair kitchen sink without draining board bowl size 18\\"x16\\"x8\\" inch of made out of stainless steel heavy duty with plugs, washers and waste pipe including waste coupling and waste pipe complete all as specified & directed by Engr-in-Charge. |
| 95 | S&F in repair wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including 125mm x125mm over head shower complete all as specified & directed. |
| 96 | S&F in repair sink cock faucet wall mounted chromium plated and suitable screwed for iron pipes of 15mm bore GI pipe all as specified complete all as specified & directed. |
| 97 | S&F, in repair, vitreous china wash basin, white, flat back of size 450mm x300mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. |
| 98 | M&L for water proofing of sunken portion consisting under mentioned items :-(i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed. Please Enable Macros to View BoQ information |
| 99 | M&L for water proofing of sunken portion consisting under mentioned items :-(i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender