Tender For Provision Of Shed For Mt Vehicles At Af Stn Sonegaon
Tender Value
43.60 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
87200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Shed For Mt Vehicles At Af Stn Sonegaon
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | Amendment | Fee | 21-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in any kind of Soil complete all as specified and directed. |
| 2 | Earth work in excavation of all kinds of soils by mechanical means (hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 mtr and lift upto 1.5m in all kind of soil complete all as specified and directed by Engineer-incharge. |
| 3 | Removing excavated material exc. 1.5 Km but n exc. 5Km and depositing where directed. |
| 4 | M&L for hardcore of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface. |
| 5 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. |
| 6 | M & L Flexural Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre not exceeding than 25cm thick , all as specified and directed. |
| 7 | M & L for Finishing surface of concrete roads, pavements, by belting complete all as specified |
| 8 | M &L for Plain cement concrete in foundation filling type C-2 1:3:6 (40mm graded aggregate) and mass concrete |
| 9 | M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb or side of path and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 10 | M&L forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A' for 150 mm thick concrete slab all as specified and directed. |
| 11 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails, column posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of FE 410-W (Gde-E-250) as directed by Engr in Charge. |
| 12 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) as directed by Engr in Charge. |
| 13 | S & F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc30cm long complete all as directed by engineer in charge |
| 14 | S&F Pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering with plain,semi circular shape /cladding to wall,fixed with self tapping screwed as specified. The color pattern of sheet and curve required at ends will be approved by Engr-in-charge and complete all as directed by Engineer in charge. |
| 15 | M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer in charge. |
| 16 | M & L for brickworK flyash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed by Engineer in charge . |
| 17 | Material and labour for 15 mm thick cement plastering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth all as specified. |
| 18 | M&L 3 coat of white wash on newely plastered surfaces on wall all as specified and directed by Engineer in Charge. |
| 19 | Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land. |
| 20 | Material and labour for TMT steel bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 21 | All as per item No 20 but 5mm dia and over up to and including 10mm dia in stirrups. |
| 22 | M & L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate)Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as spd |
| 23 | M & L fair finished Formwork to surfaces of concrete flat sides of concrete foundations, footing , bases of columns, raft and raft beams , sides and soffits if any of foundation and plinth beams and similar work complete all as specified and directed. |
| 24 | Excavation in trenches not exceeding 1.50 mtr wide and exceeding 1.50 mtr depth for foundation etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in any kind Soil complete all as specified and directed. |
| 25 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 26 | Point wiring complete with 1.5 Sq mm PVC insulated cable with copper conductor 1100 Volts grade, multistranded flame retardant low smoke (FRLS) in and including PVC conduit and condiut accessories of 20 mm dia concealed in walls, roof etc with and including provn of 1.6mm thick MS terminal boxes concealed/surface in walls with 3 mm thick laminated hylam sheet top cover for fixing switches, switch sockets outlets etc including provn of 1.5 Sqmm multistranded copper conductor cable PVC insulated unsheathed as earth continuinity cable for one light point, controlled by one switch complete all as specified and as directed. |
| 27 | All as per item No 26 mentioned here-in-before but for One socket outlet 3 pin 5 amps on independent board. |
| 28 | S&F Switch piano flush button, white/ivory finish, 5/6 amps, single pole, one way complete all as specified and as directed. |
| 29 | S&F Switch socket combination, 2 and 3 Pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type white/ ivory finish complete all as specified and as directed. |
| 30 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB\\"S/lsolators after complete all as specified and directed. (Make : Legrand cat No 507610 or equivalent & approved model of SIEMENS/L&T). |
| 31 | S&F Ceiling rose, surface Bakelite, large type, 220/240 volts, three terminals, white/ivory finish complete all as specified and directed. |
| 32 | Supply and fixing LED lights fitting 1 x 20 watt 220 volt AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 33 | S&F LED light fitting 1 x 9 watt/1x10 watt bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 34 | S&F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed (Make : Legrand Cat No 408609 to 408617 or equivalent & approved model of SIEMENS/ ABB make). |
| 35 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed (Make : Legrand Cat No 408587 to 408595 or equivalent & approved model of SIEMENS/L&T make). |
| 36 | M&L for earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth lead wire 4.0 mm dia by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel, wire gauge. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 5 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. |
| 37 | Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe for laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter or suitable for 10 sqmm 2 core cable with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches,wall, floor , pole including bends, sockets and other connected accessories complete all as specified and directed. |
| 38 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade laid in tranches passing through pipes/ducts including testing complete of following cross sectional area and size - 16 sqmm 2 core. |
| 39 | Suply and laying of GI tubing medium grade of size 40mm with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches all as specified. |
| 40 | Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth and getting out in any type of soil for laying of cable, pipes etc. all as specified and directed. |
| 41 | Removal of excavated materials to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender