Tender For Provn Of One Wash Room With 04 X Urinal Points And One Wash Room With One Urinal Point Against Job No.31/Rev/5S/2025-2026 And Provison Of 1.5Meter X 30 Meter Foot Path Tiles Against Job No. 32/Rev/5S/2025-2026 Under Age B/R (P) Of Ge 861 E
Tender Value
21.63 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
12 days left
EMD
43500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of One Wash Room With 04 X Urinal Points And One Wash Room With One Urinal Point Against Job No.31/Rev/5S/2025-2026 And Provison Of 1.5Meter X 30 Meter Foot Path Tiles Against Job No. 32/Rev/5S/2025-2026 Under Age B/R (P) Of Ge 861 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable, pipes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type soil complete all as specified and as directed by Engineer-in- charge. |
| 4 | Material & Labour for Hardcore of broken stone or boulders ,gauge exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material & Labour for Hardcore of broken stone or boulders ,gauge not exceeding 63mm , deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material & Labour for PCC 1:4:8 , Type - D2, using 40mm graded stone aggregates as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in-charge. NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule. |
| 8 | Material & Labour for Reinforced cement concrete (Design Mix) M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.NOTE :- Form work and Steel reinforcement shall be measured and paid seperately under appropriate items of Schedule 'A' BoQ.seperate items. |
| 9 | Material & Labour for Reinforced cement concrete (Design Mix) M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.NOTE :- Form work and Steel reinforcement shall be measured and paid seperately under appropriate items of Schedule 'A' BoQ seperate items. |
| 10 | Material & Labour for Reinforced cement concrete (Design Mix) M-25 as in Slabs supported on walls,beams and columns infloors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like Slabs supported on walls,beams andcolumns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed by Engineer-In-Charge. |
| 11 | Material & Labour for Mild steel TMT bars 10mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material & Labour for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material & Labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished flat surface of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material & Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, in square, rectangular or polygonal on rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material & Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. on flat rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material & Labour for 100 mm thick PCC 1:4:8 ,Type-D2 ,using 40mm graded stone aggregates as in sub base of flooring complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and labour for 75 mm thick PCC (1:3:6) Type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection / path etc. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge |
| 19 | Material & Labour for Rendering 15mm thick in Cement Mortar 1:4 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of wall finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:- Liquid Water proofing compound shall be measured and paid separately under appropriate item of Schedule'A' BoQ. |
| 20 | Material and labour for Rendering 10mm thick in Cement Mortar 1:6 , on fair faces of brick work or concrete surfaces of walls, finish even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material & Labour for Non skid ceramic coloured tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & Labour for Glazed ceramic coloured tiles size 450mm x 300mm x 7mm thick as in verticle surface , set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material and labour for preparation of new surface of walls, with and including two coats of cement base paint ,over with and including one coat of alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and labour for preparation of new surface of walls, with and including three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply & Fixing Mild Steel work as in framed roof trusses, purlins, rails and fristing incl distances pieces, cleats etc conforming to Fe 410 W (Gde - E250)Quality 'A' complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material & Labour for preparation of newely steel surfaces of any description, over 10 cm in width or girth or otherwise described , with and including applying two coat of syntheic enamal paint over with and including one coat of red oxide zinc chrome primer complete all as spefied and as directed by Engineer-in-Charge. |
| 29 | Supply & Fixing steel ventilator with top hung shutters including hinges, steel handle, steel peg stay complete complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and Fixing 3mm thick Figured glass,pin head type and glazing with oil putty in square , not exceeding 0.50 Sqm each in pane complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & Fixing Factory Solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet twith mild steel square tube complete as per manufacture specification complete all as specified and directed by Engineer-In-Charge. |
| 32 | Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and Fixing Butt hinges size of 100mm , medium weight cold rolled mild steel (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and Fixing 150mm long aluminium anodised barrel tower bolts of extruded section (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and Fixing 150 mm aluminium handle cast type, anodised, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Removing excavated material of any type of soil not exceeding 50m and depositing where directedc at a level n exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 37 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in any type of soil complete all as spefied and as directed by Engineer-in-Charge. |
| 38 | Material and Labour for Wash down water closet (pedestal pattern) complete with toilet paper holder of vitreous china fixed to wall with chromium plated brass screws, vitreous china pedestal pan and trap, including connection to drain (outgoing pipe), flushing pipe and anti-syphonage pipe, plastic seat and cover for pedestal pan, health faucet of chromium plated brass body with 1.0 metre long stainless steel braided flexible hose and wall hook, including all joints, pre-moulded rubber cones, India rubber nozzles and joint between flushing pipe and socket of W.C. pan, complete all as specified and directed by the Engineer-in-Charge. Note: Flushing cistern shall be measured and paid seperately under appropriate item of schedule 'A' BoQ. |
| 39 | Supply and Fixing PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle , with and including brackets, with and including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and as directed by Engineer-in- charge. |
| 40 | Supply and Fixing Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in- charge |
| 41 | Supply & Fix vitreous china wash basin, white, flat back, size, 550mm x 400mm including bracket for fixing 32 mm waste couping, waste pipe etc complete all as specified and directed by Engineer-In-Charge.Note: flush pipe shall be measured and paid seperately under appropriate item of schedule 'A' BoQ. |
| 42 | Supply & Fixing Vitreous China bowl urinal flat back, size of 430mm x 370mm x 340 mm white (minimum), with grating and union for discharge pipe with and including 32mm bore PVC waste pipe of appropriate length complete all as specified and directed by Engineer-in-Charge.Note: The rate of 32mm bore PVC waste pipe of appropriate length is included in this item. Contractor shall quote his rates accordingly. Nothing shall be paid extra on this account. |
| 43 | Supply and Fixing 15mm bore Pillar tap fancy type Chromium Plated , (ISI marked) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fixing 15mm bore bib tap cast copper alloy, chromium plated, fancy type (ISI marked) with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. |
| 45 | Supply and fixing 15 mm bore stop valve chromium plated with long shank and cup ( concealed type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 46 | Supply & Fixing 15mm bore PVC connection with PTMT nuts of 600mm long complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & Fixing Soap dish, vitreous China white, ap proximate approx size 160mm x 160mm x 90mmall as directed by Engineer-In-Chage. |
| 48 | Supply & Fixing 15 mm bore steel Tubes, mediumgrade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply & Fixing 20 mm bore steel Tubes, mediumgrade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and fixing 20mm bore Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 51 | Supply & fixing Rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position with and including 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete all as specified and as directed by Engineer-in-charge. Note: The rate of 20mm bore ball valves, high pressure of PTMT is included in this iterm and nothing shall be paid extra on this account. |
| 52 | Supply and fixing PVC (SWR) 110 mm bore pipes single socketed, Type-B (ISI Marked ), in any length with rubber ring joints fixed with wall / laid in trench complete all as specified and directed by Engineer-in-Charge.Note: Earh work such as excavation, returning filling and removal shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 53 | Supply and fixing PVC (SWR) Bends 110 mm bore in any radius, Type-B (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply & Fixing PVC (SWR) junction double, (double T), equal or unequal , Type-B (ISI Marked ) complete all as specified and as directed by Engineer-In-Charge. |
| 55 | Supply & Fixing 110mm bore PVC(SWR) vent cowl Type-B (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 56 | Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Material and labour for Rendering 15mm thick in Cement Mortar 1:4 , on fair faces of brick work or concrete surfaces of walls , finish even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 58 | Material & Labour for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and as direcred by Engineer-In-Charge. |
| 59 | Material and labour for PCC (1:4: 8) type D-2 using 40 mm graded stone aggregates as in concrete bed for drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested including form work complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.(iii) Excavation , earth work , returning filling shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 60 | Supply and installation of LLDPE (Linear Low Density Polyethylene )Septic Tank of approved make of 10 user capacity, conforming to relevant specifications, including excavation in all types of soil,providing and laying 100mm thick Plain Cement Concrete 1:4:8 Type D-2, using 40mm graded stone aggregates as in bedding for placing the tank in position, connecting inlet and outlet pipes, filling around the tank with suitable material, and making good the disturbed surfaces complete in all respects as directed by the Engineer-in-Charge. Note: The rate of 100mm thick Plain Cement Concrete 1:4:8 Type D-2, using 40mm graded stone aggregates, excavation and earthwork , filling the suitable material and making good the disturbed surfaces is included in this item and nothing shall be paid extra on this account. |
| 61 | Material and Labour for Construction of soakage well of size 1.80 mtr dia x 3.00mtr effective depth includingearth work such as excavation in any type of soil, returning filling and removal of earth work , foundation in PCC 1:3:6 Type-C-1 using 20mm graded stone aggregates, Honey combing Brick massony built with burnt clay old size bricks ,Top ring made with RCC M-25 Design Mix ,intercepting chamber and screen made with burnt clay old size brick with cement mortar 1:4, RCC M-25 Design Mix cover slab , 150mm bore salt glazed stoneware interconnecting pipes , filled with brick bats compete all as shown in drawing No.CESZ/TD-36/ST/20 SHEET 1/2 AND 2/2 DATED 22-02-2020 |
| 62 | Material & Labour for Porviding Precast cement concrete type 1: 2: 4, type-B1 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set and jointed in CM 1:4, complete all as specified and directed by Engineer-in-charge.. |
| 63 | Material & Labour for plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in surface channels and drains complete all as specified and as directed by Engineer-In-Charge. |
| 64 | Material & Labour for Providing cement concrete 1:3:6 , Type - C1 using 20 mm graded stone aggregate as in lintels up to 1.5 mtr span, cills and other similar bands, plinth courses, parapets, copings, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including use and waste of form work complete all as specified and directed by Engineer-in-Charge. |
| 65 | Material & Labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Material and labour for concealed Point wiring for Modular fittings using approved colour coding as per IS (Red, Black and Green for single phase circuits), in new PVC conduit complete with and including 1.5 Sqmm two single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked , drawn through with and including new PVC rigid conduit 20mm dia ( heavy duty ) ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all new fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, powder quoted sunken box of required size for light / fan point controlled by one way modular switch 5Amp / 6Amp, with and including one single core 1.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) (as in green colour) as continues earth wire connected to earth dolly etc. complete all as specified and as directed by Engineer-in- charge .Notes for serial item nos.66.00 to 67.00 : (i) switches one way 5 /6 Amp and switch socket combination 5 /6 Amp shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips as directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account.(ii) The rate of sunken box of required size is included in this item and nothing shall be paid extra on this account. |
| 67 | All as per srl item No.66.00 here in before but for Modular One 3 pin socket outlet, 5 Amps on the same board complete all as specified and as directed by Engineer-in-charge. |
| 68 | Supply and fixing Switch piano flush type 05/ 06 Amp single pole one way ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supply & Fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt (ISI Marked ) complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply & Fixing ceilings rose, 3 phase/PVC/Polycarbonate isolated body complete all as specified & directed by Engineer-In-Charge. |
| 71 | Supply and fixing Lamp holder (Angular/Straight )ISI marked , insulated body , with back plate for batten fittings complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supply and Fixing LED Lamp 10 Watt ,230 Volt, AC Supply,, Energy efficien, long life complete all as specified and directed by Engineer-in-Charge. |
| 73 | Supply and Fixing Decorative ultra slim linear LED 20 Watt 4 Feet Long lighting fixture with extruded aluminium heat sink,environment friendly, Energy efficient , ready to use pack with and including LED Tube complete , with inbuilt electronic driver, PCB, Connector block complete all as per manufactureres instructions with and including connecting up with theree copper flexible cable from ceiling rose to fitting including connectiong up and fixed on with and including two nos.square box of required size complete all as specified and directed by Engineer-in-charge. Notes:(a) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 74 | Supply & Fixing LED Security street light fitting 35 Watt 230 V AC outdoor type, energy saving and environment friendly light fitting with electronic gear housed with high pressure die cast aluminum housing LED street light luminaires complete with IP66 protection including all accessories complete all as specified and directed by Engineer-in-Charge. Notes:-(a) Contractor has to furnish a replacement warranty of 02 years for LED Light fittings complete including from the certifiy date of completion of CA. The product will be replaced free of cost in the following case :-(i) Manufacturing defects.(ii) Failure due to mechanical and electrical impact. (iii) Drop in lumen (or lux at 1 m) below 90% of clamied values of lumen(or lux at 1 m) of the LED /Luminaries. (b) All LED light must meet the provision laid down in IS - 16101, 16102 Part -I/II,16103 Part -I, 16104,16105,16106, 16108/2012 and 15885 Part -II / Section 13. (c) Scope of work shall include LED Light fittings walls/ceiling which includes needful T & P and required accessories etc if any, complete including making connection, testing etc complete. No extra payment is admissible on these account. |
| 75 | Supply and fixing sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated SPN, 4 Way 240 V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCBs / MCCBs/ Isolators, conforming to IS/IEC-61439-2:2011, BS-5484 dust and vermin proof, complete all as specified and directed by Engineer-in-charge. Notes:(i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items.(ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account. |
| 76 | Supply and fixing MCB SP 6 to 32 Amps, 240 volts , AC supply , rupturing capacity not less than 10KA,' C' Curve ,ISI Marked, with and including necessary attachment , thimbles etc complete all as specified and directed by Engineer-in-charge. |
| 77 | Supply & Fixing MCB, SPN ( single pole neutral ), AC, 240 Volts, ' C' Curve ,ISI Marked, capacity 32 Amps 10 KA and making connection s ocmplete all as specified & directed by Engineer-In-Charge. |
| 78 | Supply & Fixing Exhaust fan 250 mm sweep , made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engineer-in-Charge. |
| 79 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, nominal cross section 10 sq. mm x 2 core complete all as specified and as directed by Engineer-in-charge. |
| 80 | Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia medium grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. |
| 81 | Supply & Laying 20mm bore 3 layer PP-R (Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed by Engineer-in-charge. Note: Earth work such as excavation, returning filling and removal shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 82 | Supply & Fixing 20mm bore PP-R Gate valves (brass insert) complete all as specified and directed by Engineer-In-Charge. |
| 83 | Material and Labour for Cutting of existing PPR pipe line of 40mm to 75mm bore and inserting with and including NEW PPR TEE of appropriate size and taping new connection with all accessories complete all as specified and as directed by Engineer-in-charge. Note: The rate of supply and fixing of NEW PPR TEE of appropriate size is included in this item.Hence bidder shall be quoted his rates accordingly and nothing shall be paid extra on this account. |
| 84 | Material & Labour for Chequerd Cement Concrete tiles glossy finished of size 30cm x 30cm x 25mm thick with grey cement and pigment , set , jointed and pointed in neat cement slurry @ 3.00Kg /Sqm as in floors , laid over with and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender