Tender For Repair Maintenance Of Disinfection System, Cleaning Of Overhead Reservoir And Ug Sump Including Certain Repair Works At Water Supply Installation At Af Station Jammu & Kaluchak Under Ge (Af) Jammu
Tender Value
30 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
16 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Maintenance Of Disinfection System, Cleaning Of Overhead Reservoir And Ug Sump Including Certain Repair Works At Water Supply Installation At Af Station Jammu & Kaluchak Under Ge (Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning the overhead reservoir cap 50000 gallons to 1.0 lakh gallons (twin or single chamber) by draining the complete water and brushing the surface with iron brush and removing the complete mud/ silt and washing the complete inner surface of the tank to the entire satisfaction of Engineer in Charge and writing the date of cleaning on surface of tank with white synthetic enamelled paint on black background all as directed by Engineer In Charge.(Pump House No 8,11,3)Note:- T&P, material, labour involved in cleaning shall be arranged by the contractor without any extra cost to the department. |
| 2 | Cleaning the semi underground reservoir cap 50000 gallons(at Kaluchak) by draining the complete water and brushing the surface with iron brush and removing the complete mud/ silt and and washing the complete inner surface of the tank to the entire satisfaction of Engineer in Charge and writing the date of cleaning on surface of tank with white synthetic enamelled paint on black background including covered the opening hole of tank with chicken wire mesh with wooden frame, hinges and locking arrangement complete all as directed by Engr-in-Charge.(Map Area -02,Kaluchak -01)Note: T&P, material, labour involved in cleaning shall be arranged by the contractor without any extra cost to the department. |
| 3 | Cleaning the overhead reservoir cap 25000 to 50000 gallons (twin or single chamber) by draining the complete water and brushing the surface with iron brush and removing the complete mud/ silt and washing the complete inner surface of the tank to the entire satisfaction of Engineer in Charge and writing the date of cleaning on surface of tank with white synthetic enamelled paint on black background complete all as specified and directed.(Tech Area UGB)Note:- T&P, material, labour involved in cleaning shall be arranged by the contractor without any extra cost to the department. |
| 4 | Cleaning the SWT underground reservoir cap 20000 gallons by draining the complete water and brushing the surface with iron brush and removing the complete mud/ silt and washing the complete inner surface of the tank to the entire satisfaction of Engineer in Charge and writing the date of cleaning on surface of tank with white synthetic enamelled paint on black background including covered the opening hole of tank with chicken wire mesh with wooden frame, hinges and locking arrangement complete all as directed by Engr-in-Charge.(Tech Area -02, 172 SU-01)Note: T&P, material, labour involved in cleaning shall be arranged by the contractor without any extra cost to the department. |
| 5 | M&L for removing bore well column pipes upto 100 mm dia with submersible flat cable of any type and dismantling and taking up/down SUBMERSIBLE PUMP & Motor ASSEMBLY of capacity 33HP to 40HP , shifting to workshop and removing unserviceable spares, replacing with new spares such impeller, bushes distance bush, seal etc of same specifications / type / model. removing burnt copper winding from motor and rewinding with same guage and type of insulation copper conductor winding wires and insulation sheets , applying insulating varnish over the complete winding , drying up by heating , assembling back and testing for proper function including necessary machining works as required , bringing back and reinstalling into the bore well complete all as specified and directed.Note: Column Pipes will be measured and paid for separately under relevant Item. |
| 6 | Description all as per item No. 5 here in before but for submersible pump & motor of capacity 15 to 25 HP all as directed by Engineer In Charge. |
| 7 | Description all as per item No. 5 here in before but for submersible pump& motor of capacity up to 7.5 HP all as directed by Engineer In Charge. |
| 8 | S&F MS column pipe 100 mm dia medium grade (heavy duty) flanged type incl necessary fixing MS nut, bolt, washer & gaskets' etc incl groove for cable entry system of 3 mtr in length all as directed by Engineer In Charge. Please Enable Macros to View BoQ information |
| 9 | S&F MS column pipe 100 mm dia medium grade (heavy duty) flanged type incl necessary fixing MS nut, bolt, washer & gaskets' etc incl groove for cable entry system of 3 mtr in length all as directed by Engineer In Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender