Tender For Repair / Replacement To Damaged Rolling Shutter, Roof Sheets, Att, Waterproofing Treatment And Rehabilitation Of Internal Distressed Concrete Members And Other Connected Items, Joinery, Flooring, Sanitation Area For Depot Area At Ghatkopar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
17 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement To Damaged Rolling Shutter, Roof Sheets, Att, Waterproofing Treatment And Rehabilitation Of Internal Distressed Concrete Members And Other Connected Items, Joinery, Flooring, Sanitation Area For Depot Area At Ghatkopar Under Ge(Nw) Bhandup
BOQ
| Sl. No. | Item Description |
| 1 | S & F in repair Steel rolling shutter ( thickness of lath 1.25mm thick) without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated etc, complete gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 2 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or any pattern roof coverings complete all as specified and directed. |
| 3 | S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, drilling of screws/ankher fastners suitable legth GI, J or L hooks complete all as specified and directed by Engineer-in-Charge. |
| 4 | S & F 1 mm thick GI sheeting in ridges hips, valley gutters, drip etc necessary screwing of the sheets in the valley gutter area and refixing the same position and complete all as specified and directed. |
| 5 | S & F 2 mm fibre glass reinforced translucent corrugated sheeting of a similar pattern as that of PPGI sheet with two corrugations side lap fixed with coach screw, GI 'J' or 'L' hooks in roof complete all as specified and directed. |
| 6 | S & F in repair (except sheeting) for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, drilling of screws / ankher fastner suitable legth GI, J or L hooks in roof existing sheet complete all as specified and directed. |
| 7 | Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings complete all as specified and directed. |
| 8 | M & L for 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J hook or cranked bolts complete all as specified and directed. |
| 9 | Refixing old 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J hook or Cranked bolts complete all as specified and directed. |
| 10 | M & L for chipping, removing carefully loose / damaged concrete including plastering (total thickness exceeding 40mm but not exceeding 60mm) from surfaces of RCC members, in any location by low impact Hammer / Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris outside MOD land complete all as specified and directed. Note : Hard concrete shall not be removed by force. |
| 11 | M & L for cleaning existing reinforcement with wire / rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. \\"Feovert\\" of \\"Krishna Conchem\\" OR \\"Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd' or equivalent make, on rebars with time interval of 1 hour between the coats, complete all as specified and directed. Note :- Mode of measurement: superficial area of concrete will be measured. |
| 12 | M & L for carrying out application of ‘Bi-polar migratory corrosion inhibitor' [Make : M/s. Krishna Conchem (EPCO KP-100) / BASF (MasterProtect®8000Cl) or equiobvalent make] on RCC surfaces, complete all as specified and directed. Note :- Mode of measurement: superficial area of concrete will be measured. |
| 13 | M & L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit or equivalent make by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning / wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured. |
| 14 | M & L for Epoxy bond coat of make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit, M/s. Krishna Conchem or equivalent make as approved by GE over exposed concrete surfaces prior to application of any type of mortar / concrete to ensure bond between old concrete & new concrete / new mortar by brush application, complete all as specified and directed. |
| 15 | M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) / Polymer mortar HB of Dr Fixit or equivalent make, while the bonding agent is still tacking upto 20mm thickness, including levelling, profiling etc, complete all as specified and directed. |
| 16 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 17 | M & L for rendering 15 mm thick on fair faces of concrete surfaces, stone masonry or brickwork / PCC block in cement mortar (1:6) on wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. |
| 18 | M & L for rendering in cement plaster in 15 mm thick on fair faces of brick work with mixing @3% of water proofing compound by weight of cement finished fair & even in CM (1:4) complete as as specified and directed. Note: WPC will measurement and paid separately. |
| 19 | M & L for repairs to chajja, soffit, facia and ceiling plaster, exposed reinforcement with 15 to 25 mm thick in two or three layers plaster in CM (1:3) in patches to make the surface even and smooth including chipping and cleaning the exposed reinforcement surface, applying cement slurry at 3kg/sqm with necessary scaffoldings upto 4th storey of the bldg height complete all as specified and as directed. |
| 20 | Supply only integral water proofing compound ISI Marked complete all as specified and directed. |
| 21 | M & L for preperation of newly plastered surfaces of wall and applying 1 - 2 mm thick of wall care putty to achieve smooth finish and applying two coats of distemper acrylic emulsion of approved shade/ tint over a coat of interior primer paint complete all as specified and directed. |
| 22 | M & L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 23 | M & L for preparation of new plastered surfaces of ceiling and applying two coats of acrylic emulsion distemper over a coat of primer complete all as specified and directed. |
| 24 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames exceeding 1.5 sqm but not exceeding 4 sqm complete all as specified and directed. |
| 25 | Taking down chowkhat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm complete all as specified and directed. |
| 26 | Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm complete all as specified and directed. |
| 27 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 Sqm each, resecuring, easing, repairing, adjusting and refixing in the same opening complete all as specified and directed. |
| 28 | S & F for Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification & drawing complete all as specified and directed. |
| 29 | S & F Fatory made solid panel PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 30 | S & F second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 31 | S & F 35mm thick second class Hard wood (Hollock) Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed. |
| 32 | S & F second class HW 35 mm thick factory made Plain framed, panelled shutter (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed |
| 33 | Supply and fixing galvanized stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed. |
| 34 | S & F 100 mm long medium weight, stainless steel Butt hinges complete all as specified and directed. |
| 35 | S & F 100 mm long medium weight, mild steel Butt hinges complete all as specified and directed. |
| 36 | S & F aluminum anodized barrel tower bolt of extruded section size of bolt 150 mm complete all as specified and directed. |
| 37 | S & F aluminum handle cast type anodized 150 mm size complete all as specified and directed. |
| 38 | S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 39 | M & L for applying two coat of synthetic enamel paint over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 40 | S & F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and avg width of aperture 1.18 mm complete all as specified and directed. |
| 41 | S & F in repair stainless steel butt hinges, 100 mm, medium weight complete all as specified and directed. |
| 42 | Supply and fix in repair extruded aluminium alloy handles, fabricated type of size 150 mm in any position complete all as specified and directed. |
| 43 | S & F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed. |
| 44 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 45 | Supply only 4.80mm thick ordinary quality plain not exceeding 0.5 Sqm each pane with including wooden/rubber beading or gasket for aluminium section complete all as specified and directed. |
| 46 | S & F in repair aluminium Mortice lock, 2 lever vertical type, size 100 mm for aluminium doors complete all as specified and directed. |
| 47 | S & F in repair brass Mortice lock, 2 lever vertical type, size 75 mm for aluminium / wooden doors complete all as specified and directed. |
| 48 | Supply and fix 6 mm thick bakelite sheet prelaminated both side with decorative choice laminations with aluminium frame cuboard shutter work complete all as specified and directed. |
| 49 | S & F in repairs 40 mm dia and 75 mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified and directed. |
| 50 | S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring, fixed in door complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring, fixed in door complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 days