Tender For Special Repair To Certain Portion Of Main Road From Eme Gate To Panama Chowk, Madhya Marg & Some Internal Roads Of Md Accn Nearby Panama Area Under Ge Bhopal
Tender Value
1.37 Crore
Estimated cost
Bid Submission
29 Jul 2026
22 days left
EMD
2.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Certain Portion Of Main Road From Eme Gate To Panama Chowk, Madhya Marg & Some Internal Roads Of Md Accn Nearby Panama Area Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | M&L for scarifying or picking graveled, macadam or bituminous macadam surfaces area not exc 400 sqm and exc 50mm and n nexc 100 mm deep, complete all as specified and directed |
| 2 | M&L for preparing scarified black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bages to remove all loose dirt etc, complete all as spd and directed. |
| 3 | M&L and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed.Note:- The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013. |
| 4 | M & L for preparing Unsurfaced WBM/WMM surfaces by brushing with wire brushes for removing caked mud etc, swe-eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and as directed. |
| 5 | M&L for applying evenly a primer / tack coat with bituminous primer at 10 kg per 10 Sqm, using paving bitumen (VG-10), complete all as specified and directed. |
| 6 | M&L for Premix bituminous macadam (consolidated thickness 75 mm or less) with crushed and graded stone aggregate mixed together with VG-30 grade paving bitumen (4% by weight of total mix) to meet the desired requirement as mentioned in Particular Specification, mixing bituminous concrete in computerized hot mixing plant, laying and spreading uniformly by means of mechanical paver and rolled and compacted to required gradient and camber by 8 to 12 tonne vibratory road roller complete all as specified and directed.Note:- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(ii) The exact bitumen content required shall be determined as per IRC 27:2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced @ Rs. 46.49 per Kg. |
| 7 | M&L for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bages to remove all loose dirt etc, complete all as spd and directed. |
| 8 | M&L for applying evenly a primer / tack coat with bituminous primer at 5 kg per 10 Sqm, using paving bitumen (VG-10), complete all as specified and directed. |
| 9 | S&F factory made kerb stone of M-25 grade cement concrete in position at or near ground level to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed |
| 10 | M&L for for preparation of kerb stone surfaces and applying two coats of synthetic enamel paint of different colour for neat and smooth finishing complete all as specified and as directed. |
| 11 | M&L for Bituminous premix semi dense asphatic concrete 30 mm consolidated thickness with 5.50% binder (paving bitumen VG-30) by weight of total mix, mixed in computrized hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and power roller 8 to 12 ton capacity complete all as specified and directed.Note:- (i) Semi dense asphaltic concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(ii) The exact bitumen content required shall be determined following the Marshal Mix Design procedure contained in the Asphalt Manual MS-2 (Sixth edition) as referred in case 3.5.3 of IRC 111:2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced @ Rs. 75.30 per Kg. |
| 12 | Providing and applying of hot applied thermoplastic paint of approved quality 2.5mm thick including reflectorising beads @ 250 gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from srtreaks and holes etc complete all as specified and directed. |
| 13 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 14 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out any type of soil and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed. |
| 15 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed. |
| 16 | Hardcore of broken stone or boulders of quage n exc 63mm, deposited , soread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface acomplete all as specified and directed. |
| 17 | M&L 75mm thick PCC 14:8 type D-2 using 40 mm graded stone aggregate as in Sub-floors, Sub Bases, floors and paving/hardstanding etc., complete all as specified and directed. |
| 18 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 19 | M&L for cement concrete type B1 1:2:4 (20 mm graded stone agg) as in coping, benching etc for drain bed, edges of paver block and similar works complete all as specified and directed. |
| 20 | S&F as in repair, Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 21 | Supply and fix in repair, solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 22 | S&F as in repair, cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions,complete all as specified and directed. |
| 23 | S&F as in repair, rubber speed bump of size 50 mm ( height) x 300 mm (width) x 500 mm (length), ABS block and yellow & reflectors on both sides including necessary fixing arrangement with epoxy/thermoplastic adhesive all as per manufacturers instructions and complying the latest MoRTH specifications, complete all as specified and directed. |
| 24 | S & F in repair road convex miror outdoor type made of one piece polycarbonate of size 1000 mm including steel tube of nominal bore 80 mm and thickness of 4.0 mm as per IS 1161:2012 and 1.50 mtr length for mounting of mirror including painting on steel tube with synthetic enamel paint on red oxide zinc chrome primer in approved shade including embedding 300 mm below GL including ecavation and PCC M15 (Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 400 mmx 400mmx400 mm and making good surface complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender