Tender For Provn Of Amenity Space For Jcos, Or And Vetrans At Mcte Under Ge (Mcte) Mhow
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
6 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Amenity Space For Jcos, Or And Vetrans At Mcte Under Ge (Mcte) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed. |
| 2 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 3 | Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed |
| 5 | M&L for RCC Nominal mix 1:1:5:3 type A1 (using 20mm graded aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 6 | M&L RCC Nominal mix Type A-1, 1: 1.5: 3 (20mm graded aggregate) as in lintels, roof beams, bands including necessory form work complete all as specified and directed. |
| 7 | M&L for RCC 1:1:5:3 type A1 (using 20mm graded aggregate) in columns, pillare, piers, posts and struts complete all as specified and directed. |
| 8 | M&L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for Rendering 15mm thick on fair faces of concrete/ brick surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed. |
| 10 | M&L for prepration of new surfaces of plastered wall and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. |
| 11 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 12 | M&L for prepration of new wall interior surfaces & applying Birla/ JK wall care white putty 2mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc. complete all as specified and directed. |
| 13 | M&L for Moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering and roolled with 8 to 10 tonnes vibrator power roller to camber gradient required including watering and well ramming complete all as specified and directed. |
| 14 | M&L for broken stone or bounders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/ true surface complete all as specified and directed. |
| 15 | M&L for cement concrete 1:3:6, type C2 using 40mm graded aggregate for in flooring and mass concrete etc. complete all as specified and directed. |
| 16 | M&L for Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 17 | S&F Steel work in tubular trusses including special shaped washer etc. as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee,channel pipes, tubes, and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar of grade FE-410, (gde-E-250) quality complete all as specified and directed. |
| 18 | S&F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | M&L for MS \\"TMT\\" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips complete all as specified and directed. |
| 20 | All as per Srl item No. 14.00 above but for 5mm dia and over upto 10mm dia and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 21 | S&F MS plates (plain or chequred) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed. |
| 22 | Form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed. |
| 23 | Form work to sides of columns getting rough finished surfaces of concrete complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender