Tender For Repairs To Joinery, Renovation Of Toilets/Kitchens, Internal Water Supply, Plumbing, Sanitary Fittings, Floors/Tiles, Plaster, Chajjas/Parapets/Fins Etc And Other Connected B/R Works In Ph-Iii At Af Stn Udh Ur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jul 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, Renovation Of Toilets/Kitchens, Internal Water Supply, Plumbing, Sanitary Fittings, Floors/Tiles, Plaster, Chajjas/Parapets/Fins Etc And Other Connected B/R Works In Ph-Iii At Af Stn Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description exc. 1 sqm and n.exc 2 sqm each and removing from site complete all as directed. |
| 2 | Taking down chowkats or frames with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified. |
| 3 | Taking down chowkats or frames with shutters without taking off shutters from the frames, area exc 1.50 sqm but n exc 4 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified. |
| 4 | S&F pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing wgs, hinges, lock, strike plates etc complete as as specified . |
| 5 | S&F pressed steel frames of size 125x60 mm for doors with one or move rebates including necessary fixing wgs, hinges, lock, strike plates etc complete as as specified . |
| 6 | Supply and fixing 35mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including mouldings fixed to chowkats, complete all as specified. |
| 7 | Supply and fixing 25mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including mouldings fixed to chowkats, complete all as specified. |
| 8 | Supply and fixing 2nd class hardwood 35 mm thick factory made glazed and skelton shutters to receive glass/ gauge of with sash bars for windows/ventilators fixed in position complete all as specified in SSR Part-I Sec 8 clause 8.20(B) complete all as specified. |
| 9 | M&L for preparation of new wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 10 | M&L for preparation of new steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 11 | S&F Factory made PVC single door frame of size 50x47mm with a wall thickness of 5mm plain colour sheet reinforced with 19mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 160 of SSR 2010 part-II. The door frame to be fixed to the wall using MS screw 75mm long with PVC fastener complete as per manufacturing, instruction complete all as specified. |
| 12 | S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube 19mm x 19mm having wall thickness 19 gauge for stiles MS tube 15mm x 15mm having wall thickness for top and bottom rails MS frame shall be covered with 5mm thick heat moulded plain colour PVC ‘C’ channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mmx2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail Paneling of 5mm thick plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg. given on page 156 of SSR 2010 part II. The width of stiles and rails shall be as specified in para 8B, 21 on page 156 of SSR 2010 part II. Each PVC door shutter leaf consists of 4 Nos 100 mm long MS butt hinges complete all as specified. |
| 13 | S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer incl taking down old, complete all specified and as directed.Note : i) The ventilator shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3ii) Glazing, wire gauge shall be measured and paid separately. |
| 14 | M&L for factory made 1.25mm thick mild steel window (Box type)(primer coated) ERW hollow P-section of size 60mm x 25mm incl. grills using 10sqm bar double rebated both gauge and glass shutter comprised gauged glazed skelton shutter of ERW section 50mm x 20mm and 1.0mm thick with two openable leafs having two Nos sash bar of T- section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick incl. cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for each window incl. following fittings welded to frame shutter complete all as specified and directed :- (a) Hold fast, 150mm long of flat iron 12mm x 3mm made to shape 04 Nos per window. (b) handle of Z- section 20mm x 25mm, 100mm long 01No per leaf. (c) stainless steel tower bolt 150mm long 02 Nos per leaf . (d) Z- section 20mm x 25mm, 100mm long stopper 01No per leaf. (e) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinge 01 No per leaf. (f) MS pintal hinge of size 75mm x 12mm 02 Nos per leaf incl stainless steel wire cloth, .25mm to .36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with aluminium wire staples and glass pane 3mm thick fixed with MS pins and oil putty/silicon glue incl two coats of synthetic enamel paint over one coat of red oxide primer and incl taking down old, complete all as specified and directed. |
| 15 | S&F aluminum handles, cast type anodized (size of handle 150mm) fixed with screw complete all as directed.. |
| 16 | S&F 100mm long butt hinges mild steel medium weight cold rolled ISI marked complete all as directed. |
| 17 | S&F 100mm long butt hinges stainless steel ISI marked complete all as directed. |
| 18 | Supply & fixing 200mm long aluminum anodized barrel tower bolt of extrude section ISI marked fixed with screw complete all as directed. |
| 19 | S&F 250 mm long aluminum alloy, anodised sliding door bolts, with hasp, staple (bolt type and fixing clip of sheet, cast or extruded section or cast aluminium alloy and complete all as specified. |
| 20 | S&F floor door stopper of 140mm aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as directed. |
| 21 | S&F 3mm thick sheet glass ordinary quality in square nexc 0.50 Sqm each pane fixed with wooden beads/oil putty in steel/wooden window. |
| 22 | S&F sheet glass 4mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane. |
| 23 | S&F galvanised mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 24 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as directed. |
| 25 | M&L for providing cement concrete 1:3:6 type C-1 (using 20mm graded agg) as in holdfast complete all as directed. |
| 26 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; hold fasts, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as directed. |
| 27 | Dismantling boarding any description fixed in any position with nails / screws complete all as spfd. |
| 28 | S&F 18mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screw to timber/steel frame work, including 1mm thick PVC moulding all around including edging, complete all as specified and as directed by Engr-in-charge. |
| 29 | S&F 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood beading fixed on edge of board, fixed with screws to timber/steel frame work complete all as directed. |
| 30 | M&L for .90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 31 | S&F continuous (piano) hinge, mild steel, bright finish or electrogalvanised 30mm wide fixed with screw complete all as spfd. |
| 32 | S&F stainless steel magnet catcher of size 55mmx30mmx15mm for wooden pannel, complete all as specified and as directed by Engr-in-charge. |
| 33 | S&F 100mm brass handles, cast type, polished bright complete all as specified and as directed by Engr-in-charge. |
| 34 | M&L for 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber framework complete all as directed. |
| 35 | M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned atjoints, supplied and fixed complete all as directed. |
| 36 | S&F in repair of 25 dia stainless steel curtain rods incl funnel horns,l bracket and middle support,end caps etc all as directed by Engr in Charge. |
| 37 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 39 | M&L for granite (of any type) 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills' cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed bedding layer of 15 mm thick in CM 1:4 complete all as spfd. and polishing complete. |
| 40 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 41 | M&L non-skid coloured ceramic tiles(Square/Rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:6 complete all as spfd. colour and design approved by Engr-in - Charge,Make:-Somany,Kajaria,Nitco |
| 42 | M&L non-skid coloured ceramic tiles(Square/Rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:6 complete all as spfd. colour and design approved by Engr-in - Charge,Make:-Somany,Kajaria,Nitco |
| 43 | M&L non-skid coloured ceramic tiles(Square/Rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm ,7-8 mm thick as in skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 10 mm thick in CM 1:4 complete all as spfd. colour and design approved by Engr-in - Charge,Make:-Somany,Kajaria,Nitco |
| 44 | M&L for Glazed ceramic tiles in vertical surface 300x 450x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM-1:4 complete all as directed. |
| 45 | Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc , area n.exc 2.00 sqm each complete all as specified |
| 46 | M&L for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rubbing and polishing complete all as specified and directed. |
| 47 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick bedded and jointed with grey cement and no pigment laid over 15mm thick screed bed in CM-1:6 complete all as directed. |
| 48 | M&L for PCC 1:4:8 type D-2 75 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and as directed. |
| 49 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 50 | M&L for cement concrete type B0, 1:2:4 (using 12.5mm graded agg) 25mm thickness as in floor for laying tiles complete all as directed. |
| 51 | M&L for PCC 1:3:6 type C-1 50mm thick (using 20mm graded aggregate) as in plinth protection finished the concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 52 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. |
| 53 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed. |
| 54 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as spfd. |
| 55 | M&L rendering 15mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement. |
| 56 | M&L rendering 15mm thick CM 1:4 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement. |
| 57 | M&L for rendering 5 mm thick in CM 1:3 as in ceiling on fair faces of brickwork or concrete sureface finished even & smooth w/o using extra cement. |
| 58 | M&L for preparation of newly plastered surface and applying two coat of Oil Bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 59 | M&L for preparation of newly plastered surface and applying two coats of cement based paint over a coat of alkali resistent primer on walls complete all as specified and as directed. |
| 60 | M&L for preparation of newly plastered surface and applying two coats of white wash on ceiling complete all as specified and as directed. |
| 61 | M&L for Preparation of Newly/previously old plastered surfaces of wall and applying 3mm thk Wall care putty (to be applied in two coats) complete all as specified and as directed |
| 62 | M&L for preparation of old surface of wall of any description and applying one coats of oil bound distemper including filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good approved by Engr-in-Charge complete all as spfd. |
| 63 | M&L for preparation of old surface of ceiling of any description and applying one coats of white wash by filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good approved by Engr-in-Charge complete all as spfd. |
| 64 | M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed |
| 65 | M&L for preparation of old painted steel or steel based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed |
| 66 | S&F in repair sheet glass 4mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane. |
| 67 | S&F in repair 3mm thick sheet glass ordinary quality in square nexc 0.50 Sqm each pane fixed with wooden beads/oil putty in steel/wooden window. |
| 68 | S&F in repair galvanised mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 69 | Taking up or down steel tubing & connections, incl cleaning for refixing etc for 15mm dia pipe. |
| 70 | Taking up or down steel tubing & connections, incl cleaning for refixing etc for 20mm dia pipe. |
| 71 | M&L tubes medium grade galvanized with all fitting and fixed complete to walls or laid in floors for 15mm bore pipe. Make:- jindal,BST, Tata |
| 72 | M&L tubes medium grade galvanized with all fitting and fixed complete to walls or laid in floors for 20mm dia bore pipe. Make- Supreme, finolex, kisan |
| 73 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 74 | S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & directed. Make- Supreme, finolex, kisan |
| 75 | S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & directed. Make- Supreme, finolex, kisan |
| 76 | S&F in repair PVC (SWR) bends 110mm bore complete all as specified & directed. |
| 77 | S&F in repair PVC (SWR) bends 75mm bore complete all as specified & directed. |
| 78 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 110mm bore complete all as specified & directed. |
| 79 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 75mm bore complete all as specified & directed. |
| 80 | S & F in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted / erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 complete all as specified. |
| 81 | S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white (excluding fixing bolt ,flushing cistern and flush pipe size 580 x 440 mm white with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed. Make:- Cera, Essco, varmora |
| 82 | S & F in repair seat and cover for pedestal pan white/black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device complete all as specified and as directed. |
| 83 | S&F in repairs vitreous china orrisa pattern white squatting pan orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed. Make:- Cera, Essco, varmora |
| 84 | S&F in repair PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. Make: - Cera, Jaquar, Hindustan |
| 85 | S&F in repair 15 mm bore angle valve with wall flange fency type chromium plated, screwed down, high pressure with cruth or butterfly handle Make:-CERA, Jaquar, Prima |
| 86 | S&F in repir brass chromium plated wall mixer with long bend pipe for overhead shower with built-in non return valve complete for mixing hot & cold water screwed down for iron pipe 15mm bore Make : CERA, Jaquar, Essco |
| 87 | M&L in repair 15mm dia bib taps with wall flange and aerator chromium plated fency type with crutch or butter fly handle, screwed down screwed for iron pipe or brass ferrule and fixed Make: CERA, Jaquar, ESS ESS |
| 88 | S&F in repairs single lever sink mixer(wall mounted) with 200 mm(8') long swivel spout connecting les and wall flanges complete all as spfd Make:- CERA, Jaquar, Kohller |
| 89 | S&F in repair two way angle cock with wall flange complete Make:-CERA, Jaquar, Prima |
| 90 | S&F in repair pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule complete all as specified and as directed. Make: CERA, Jaquar, ESS ESS |
| 91 | S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed. Make:- CERA, Jaquar, Kohller |
| 92 | S&F in repair health faucet ABS body with wall hook and 1 mtr SS braided rubber hose pipe Make:- Cera, Jaquar,Kohller |
| 93 | S&F in repair 32mm dia PVC waste pipe with cap socket suitable for 32 mm waste coupling complete all as directed. Make: PRAYAG, Supreme, sakti |
| 94 | S&F in repair stainless steel plate rack size 36\\" x 30\\" x 8\\" for grill 12 nos plates and hook for hanging cups complete all as specified by Engr in Charge. Make: TAYNA, NIRALI,Jayana |
| 95 | S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 96 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 97 | S&F in repair Glass shelf assembly 60cm long with CP rail complete all as specified. |
| 98 | S&F in repair Soap Disc Make :-CERA,Prayag,Jaquar |
| 99 | S&F in repair corner glass shelf size 300X300 mm Make :-CERA, Jaquar, kohller |
| 100 | S&F in repair brass chromium plated tubular towel rail ,20 mm dia,D type,60 cm long between flange complete all as spfd. Make :-CERA, Jaquar, kohller |
| 101 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified.`Make: PRAYAG, Supreme, sakti |
| 102 | S & F in repair looking mirror of size 600 x 450 , 6mm thick with bedding and 6mm thick commercial ply board complete. |
| 103 | S&F in repair stainless steel / powder coated Peg set of five of good quality approved by Engr in Charge. |
| 104 | S&F overhead rain shower with arm as specified. (Make :- CERA, Jaquar, Varmora) |
| 105 | Welding in repairs exc 6cm but n exc 10cm in length including necessary arrangements thickness of metal to be welded n.exc 6mm complete all as directed. |
| 106 | Demolition of cement concrete reinforced (reinforement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing form site all as specified and directed. |
| 107 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed. |
| 108 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls and the like complete all as specified and directed. |
| 109 | S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 110 | Formwork to soffits of suspended slab such as Flat roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fins, facia and the like work fair finished surface of concrete, all as specified . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 days