|
| 1 | Demolition any type of masonary built in any type cement/lime mortor and disposed of unserviceable material outside MD land complete all as specified and as directed. |
| 2 | M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) grade C-4 and setting in CM 1:6 complete all as specified and as directed. |
| 3 | Excavating post holes (or similar holes) each n.exc0.5 cu.m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25 cm complete all as specified and as directed. |
| 4 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 5 | M&L PCC (1:4:8) type D-2, 40mm graded coarse aggregrate as in foundations,sub base, filling in mass concrete etc. complete all as specified and directed. |
| 6 | M&L for plain cement concrete 1:3:6 Type C2 using 40mm graded aggregateas in foundation, filling in mass concrete for post complete all as specified and directed. |
| 7 | M&L for plain Cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in benching/kerbing beside interlocking tile/chequred tile etc complete all as specified and directed. |
| 8 | M&L for plain cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in coping including form work etc complete all as specified and directed. |
| 9 | Rendering 15 mm thick in cement mortar (1:4) finished fair and even on faces of brick work or concrete surfaces complete all as specified and as directed by Engr-in-Charge. |
| 10 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and Smooth without extra cement including taking down cement plaster on stone or brick wall walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 11 | M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified. |
| 12 | Complete removal of existing treatment and applying two coats of cement base paint white or tinted, on walls over and including a coat of primer, all as specified and directed. |
| 13 | M & L for Preparation of old decorated surface of any description over 10 cm width or girth on walls , soffits/facia of chajja/roof projection etc and applying one coat of cement base paint all as directed |
| 14 | M & L Preparation of old decorated surfaces by brooming down and scrapping wherever necessary and applying one coat of weather proof exterior acrylic emulsion paint(1st Quality) of required shade (Company Depot Tinted) with silicon additives, on walls , cornices, borders, facia of chajjas & projected columns etc complete all as specified and directed. Note :- (a) Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality. |
| 15 | Dismantling of fencing wire mesh any type complete all as specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 17 | Dismantling posts or struts (Wood, Steel or RCC), any section embedded in concrete, brick work etc. including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 18 | S&F mild steel work in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 19 | Supply only Chain link MS galvanised fencing, any size or type |
| 20 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 21 | S&F MS Framed work such as grills, gratings, etc.. for drain cover with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 22 | S &F framed MS work as in doors or gates of with tube section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and decorative cast iron artical etc. complete all as specified and directed. |
| 23 | S&F Rolled sections MS work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle leats or other connecting plates , Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed. |
| 24 | Dismantling of plain or corrugated steel/asbestos sheeting in roof covering complete all as specified and directed. |
| 25 | S & F roof sheeting pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 26 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 27 | S&F 2.00mm thick, Fibre glass reinforced translucent plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall including dismantling of old sheet etc. complete all as specified and directed. |
| 28 | S&F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line of wire to be measured) |
| 29 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or zink chrome primer on new steel surfaces complete all as specified and directed. |
| 30 | M & L for Preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and applying one coat of synthic enamel paint complete all as specified and directed |
| 31 | M&L for any shade, vitrified ceramic tiles 9 to 10mm thick (square/ rectangular) polished, size of Each tiles 600x600mm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 incl dismantling floor, hearth or wall tiling , removing rubbish off the MOD land complete all as speicified and directed. |
| 32 | . --Ditto-- all as per item No 31 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces all as specified. |
| 33 | M&L for coloured glazed ceramic designed tiles in vertical surface 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over incl. 10 mm thick backing coat in CM 1:4 to maintaine true plumb incl dismantling floor, hearth or wall tiling including taking down backing coat, removing rubbish off the MOD land complete all as speicified and directed. |
| 34 | Dismantaling Stone slabs and tiles laid dry and pointed, bedded and pointed in cement mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 35 | M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300mm x 20mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 36 | M&L 20-25 mm thick Machine cut kota stone slab flooring over 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition complete all as specified and directed by Engr-in charge. |
| 37 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM (1:4) including demolition complete all as directed by Engineer-in-charge. |
| 38 | M&L for 16 -18 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in steps, pillars;window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radius etc laid over 20 mm thick screed bed in CM ( 1:4) including demolition of existing stone slab of any description all as specified and directed. |
| 39 | M&L for 16 -18 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in walls, skirtings and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc laid over 10 mm thick plastering in CM ( 1:3) including demolition of existing stone slab of any description all as specified and directed. |
| 40 | Rounding to edges of stone slabs one edge, such as in steps, Cooking platform, and other similar situations complete all as specified and directed. |
| 41 | Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete including demolition of existing stone slab of any description all as specified and directed. |
| 42 | M&L for precast cement concrete interlocking paver blocks, coloured, glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick, M-35 grade, laid over & including 50mm thick stone dust/grit all as specified and as directed complete all as specified and directed . |
| 43 | Fixing only interlocking tiles of any thickness and size including 30 mm thick sand cushoning complete all as spd and directed. |
| 44 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 complete all as specified and directed. |
| 45 | M&L for Precast factory Made SFRC (Steel fibre reinforced concrete) manhole cover with frame of following specification for Heavy duty including groove & hook arragement for liftingand placing in position complete all as specified :(a) Clear Opening : 600mmx900mm (b) cover size : 700mmx1000mm (c) thickness of cover : 100mm (d) frame outside diamention : 830mmx1150mm (e) Thickness of Cover frame : 150mm (f) Resting length : 75mm (g) Grade of concreate : M-30, Including demolition of old manhole cover |
| 46 | M&L for Precast factory Made SFRC (Steel fibre reinforced concrete) manhole cover with frame of following specification for Heavy duty including groove & hook arragement for liftingand placing in position complete all as specified(a) Clear Opening : 600x600mm (b) cover size : 700mmx700mm (c) thickness of cover : 100mm (d) frame outside diamention : 820mmx820mm (e) Thickness of Cover frame : 150mm (f) Resting length : 50mm (g) Grade of concreate : M-30 Including demolition of old manhole cover |
| 47 | M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate for drain covers incl demolition of reinforced cement concrete of any description & in any position complete all as specified and directed. |
| 48 | M&L for separating, scraping and cleaning of reinforcement all as specifed and directed. (Demolition of concrete measured separately) |
| 49 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 50 | M&L for TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and directed. |
| 51 | M&L in repair of PVC (SWR) pipes single socked in any length with rubberring joints pipes laid in trenches or in floor 110 mm dia incl demolition of existing surface any description to a required width and depth (min 250mmx250mm) and providing PCC 1:3:6 bedding, packing under and haunching and removal of debris out side of the MD land complete all as specified and directed. |
| 52 | Taking up or down drain cover slabs of any description for and including cleaning of storm water drains width exc 0.30m but nexc 0.45m by roding or mechanical means and well flushing with water taking out waste materials any quantity and depositing where directed including covering the same with at least 30cm thick layer of soil and refixing the cover slabs in same position with cement mortor complete all as specified and directed. Please Enable Macros to View BoQ information |
