Tender For Special Repair To Parking Shed (Bldg No P-19) Against Job No Stn Hq Awantipur/Spl Repair (Bldg)/01/2025-26, Provn Of Steel Railing Over Brick Wall Against Job No 27/Rev/Vf/2025-26 And Provn Of 03 X Water Tanks (01 X 5,000 Ltr & 02 X 10,000
Tender Value
22.10 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
6 days left
EMD
44200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Parking Shed (Bldg No P-19) Against Job No Stn Hq Awantipur/Spl Repair (Bldg)/01/2025-26, Provn Of Steel Railing Over Brick Wall Against Job No 27/Rev/Vf/2025-26 And Provn Of 03 X Water Tanks (01 X 5,000 Ltr & 02 X 10,000 Ltr) & 01 X Hp Water Pump With Accessory Against Job No Stn Hq Awantipur/2025-26/Minor/05 Under Age B/R (P) Of Ge 861 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning of Horizontal Openwell Submersible Pump Set, 3 HP capacity, suitable for connection with existing 40 mm dia GI delivery pipe, complete with all necessary accessories, fittings, foundation fasteners, electrical connections, alignment, testing and commissioning, ensuring satisfactory performance under operating conditions, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 2 | Supply and fixing of 2.5 Sqmm, 3 Core, flat submersible cable, PVC insulated and PVC sheathed, with multi-stranded copper conductors, 1100 Volt grade, suitable for submersible pump applications, complete with all necessary connections, jointing, termination, testing and commissioning, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 3 | Supply and laying 40 mm dia galvanised iron pipe, medium grade, laid in floors, walls, trenches or fixed on surfaces as required, including all necessary fittings and accessories such as sockets, elbows, tees, unions, reducers, nipples, clamps, cutting, threading, jointing, testing and commissioning, complete in all respects as specified and directed by the Engineer-in-Charge. Note: Earth work such as excavation , returning filling and removal shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 4 | Supply and laying 25 mm dia galvanised iron pipe, medium grade, laid in floors, walls, trenches or fixed on surfaces as required, including all necessary fittings and accessories such as sockets, elbows, tees, unions, reducers, nipples, clamps, cutting, threading, jointing, testing and commissioning, complete in all respects as specified and directed by the Engineer-in-Charge. Note: Earth work such as excavation , returning filling and removal shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 5 | Supply and fixing 25mm bore Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 6 | Material and Labour for Cutting of existing CI / GI pipe line of 20mm to 50mm bore and inserting with and including NEW TEE of appropriate size and taping new connection with all accessories complete all as specified and as directed by Engineer-in-charge. Note: The rate of supply and fixing of NEW TEE of appropriate size is included in this item.Hence bidder shall be quoted his rates accordingly and nothing shall be paid extra on this account. |
| 7 | Material and labour for fabrication, assembling and erection of compound girders and stanchions, lattice girders, aerial masts, staging for water tank of solar system and similar structures, built up from two or more rolled steel beam sections, channel sections, angles and plates, including caps, bases, splices, lattice bars, stiffeners, gusset plates, cleats, brackets, welding, bolting, riveting, cutting, drilling, hoisting, fixing and all other incidental works required for complete execution. The item shall also include preparation of steel surfaces and application of one coat of red oxide zinc chromate primer followed by two coats of synthetic enamel paint, complete in all respects as specified and directed by the Engineer-in-Charge. Notes:1.The rate quoted for this item shall be deemed to include the cost of preparation of surfaces and application of one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint. Nothing extra shall be paid on this account.2.Measurement for payment shall be based on the actual weight of structural steel incorporated in the work, calculated from standard sectional weights or actual weights, as applicable.3.No allowance shall be made towards the weight of primer, paint for the purpose of measurement and payment. Only the net weight of structural steel shall be considered. |
| 8 | Material and labour for Plain Cement Concrete (PCC) 1:3:6, Type C-2, using 40 mm graded stone aggregates, in foundations, bedding, filling and mass concrete for installation of solar collectors, supports for hot water storage tanks, hot water pipelines and associated components, including formwork where required, finishing surfaces and all incidental works, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 9 | Supply and fixing rotational moulded polyethylene water storage tank of 5000 litres capacity, white colour, cylindrical vertical type, triple-layered , with closed top, hoisted and fixed in position, with and including 20 mm bore high-pressure PTMT ball valve with epoxy-coated aluminium rod and high-density polyethylene float ball, complete with all necessary fittings, connections and accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 10 | Supply and fixing rotational moulded polyethylene water storage tank of 10000 litres capacity, white colour, cylindrical vertical type, triple-layered , with closed top, hoisted and fixed in position, with and including 20 mm bore high-pressure PTMT ball valve with epoxy-coated aluminium rod and high-density polyethylene float ball, complete with all necessary fittings, connections and accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 11 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, cable , Pipes , etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed by Engineer-in- charge. |
| 12 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in any type of soil complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Removing excavated material/soils to a distance not exceeding 50 mtr and depositing where directed at a level not exc.1.5 mtr above the starting point, complete all as spefied and as directed by Engineer-in-Charge. |
| 14 | Dismantling of machine pressed precast concrete inter locking blocks and Material & Labour for Machine Pressed Precast Interlocking paver block with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006 of 100 mm thickness, made out of M-50 grade concrete laid over with and including 50mm thick sand cushioning for laying bed for interlocking paver block including watering and consolidation complete all as specified and as directed by Engineer-in-charge. Note:The rate of dismantling of machine pressed precast concrete inter locking blocks and 50mm thick sand cushioning for laying bed for interlocking paver block including watering and consolidation included in this item & contractor shall quote his rate accordingly .Nothing shall be paid extra on this account. |
| 15 | Demolition cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 16 | Material & Labour for Hardcore of broken stone or boulders, gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material & Labour for 100 mm thick cement concrete 1:4:8 ,Type-D2, using 40mm graded stone aggregates as in sub base of flooring complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material & Labour for Providing cement concrete 1:3:6 type C1 using 20 mm graded crushed stone aggregate is in kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-In-Charge. |
| 19 | Material & Labour including preparation of old decorated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-In-Charge |
| 20 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including roof covering etc complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material & Labour for PCC 1:4:8, Type - D2, using 40mm graded stone aggregates as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Material & Labour for 20 mm Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-In-Charge. |
| 25 | Material and Labour for 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding of cement mortar 1:4 complete all as specified and as directed by Engineer-In-Charge. |
| 26 | Supply & Fixing Mild steel work as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Material & Labour for preparation of newely steel surfaces Surfaces of any description, not .exceeding 10cm in width or girth when unconnected with other painting or when painted in a different tint, with and including applying two coat of syntheic enamal paint over with and including one coat of red oxide zinc chrome primer complete all as spefied and as directed by Engineer-in-Charge. |
| 28 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender