Tender For Provn Of Toilet Bathroom Block Near Bldg No.Ls-30,Provn Of Chain Link Fencing At Around 450 M From Bn Mag To Rp Gate,Provn Of 42 Ceiling Fan For Otm & Md Accomdation ,02 X Deep Freezer For Cook House And 02X Ac For Dining Hall And Provn Of
Tender Value
33.50 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
17 days left
EMD
67000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Bathroom Block Near Bldg No.Ls-30,Provn Of Chain Link Fencing At Around 450 M From Bn Mag To Rp Gate,Provn Of 42 Ceiling Fan For Otm & Md Accomdation ,02 X Deep Freezer For Cook House And 02X Ac For Dining Hall And Provn Of Bldg Security Lights,Deficient Wall And Ceiling Fan At Lekhpani Mil Stn Under Ge Dinjan No.2
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation 30cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavating over area in soft/loose soil, n exc 1.5m deep and getting out complete all as specified and directed by Engr-in-Charge. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation and taking up and laying of under ground cable /pole and stay foundation and getting out in soft/ loose soil complete all as specified and directed |
| 4 | All as per item no 03 above but exc 1.5m deep but n. exc 3 mtrs and getting out complete all as specified and directed by Engr-in-Charge. |
| 5 | Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) in foundations, filling, mass concrete etc complete all as specified and directed. |
| 6 | M&L RCC 1:2:4 type B1 nominal mix (using 20mm graded aggregate) in beam/lintel and similar RCC works all as specified and directed. |
| 7 | M&L RCC type A-1, 1:1.5:3 B-1 (20mm graded aggregate) as in as in slab of septic tank, soak well etc supported on walls beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves & the like etc complete all as specified and directed |
| 8 | M&L RCC type B-1, 1:1 1/2:3 B-1 (20mm graded aggregate) as in as cover slab for manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces incl chamfered, weathering, throating etc incl necessary use & waste of form work complete all as specified and directed |
| 9 | M & L for use & waste of formwork with rough finished flat concrete faces as soffits of suspended slab such as roof slabs, floor slabs, landing & similar work |
| 10 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed. |
| 11 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 12 | All as per Item above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and as directed |
| 13 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directd |
| 14 | M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM 1:4. |
| 15 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces in two layers 5mm thick finishing layer over 10mm thick backing layer finished fair and even with mixing water proofing compound to top layer as per manufacturers instruction and as directed (WPC will be measured separetely). |
| 16 | Supply only Integral water proofing compound of approval brand complete all as specified and directed. |
| 17 | M&L Prepration of newly plastered surface of wall and applying two coat of cement base paint complete. |
| 18 | M&L for rendering 15mm thick in CM 1:4 and finished fair and even all as specified and directed by Engr-in-Charge. |
| 19 | M&L for rendering 15.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed. |
| 20 | M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified & directed. |
| 21 | M&L for glazed coloured ceramic tiles in vertical surface 450x350 x 7mm /350x250x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete all as specified & directed. |
| 22 | M&L for PCC 40mm type B0 (1:2:4) using 12.5mm aggregates in floors, finished even and smooth,without using extra cement complete all as specified and directed. |
| 23 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.11 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed. |
| 24 | S&F steel ventilators (Factory made) fixed type complete with glazing bars dovtailed or welded all as specified. |
| 25 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed. |
| 26 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed. |
| 27 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each pane complete all as specified and as directed |
| 28 | S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with steel wire staplescomplete all as specified & directed. |
| 29 | S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed. |
| 30 | S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed. |
| 31 | S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed. |
| 32 | Supply & Fixing mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed. |
| 33 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. complete all as specified and as directed |
| 34 | S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 35 | S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, etc. fixed with self tapping screws complete all as specified & directed. |
| 36 | Material & Labour for 75 mm thick Plain cement concrete ( 1:3:6 ), type C-1 (using 20 mm graded stone aggregate), as in plinth protection complete all as specified and as directed. |
| 37 | S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed. |
| 38 | S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed. |
| 39 | S&F fancy type15mm dia Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified & directed. |
| 40 | S&F vitreous china wash down water closet, \\"padestal pattern, white( Including fixing bolts and plastic water closet seat , black closet patternwith flat bottm and cover and mild steel chromium plate and aluminium hinges device. (excluding flushing cistern and flush pipe) complete all as specified & directed. |
| 41 | S&F vitreous china wash down water closet, \\"Squatting pan of pattern long pansize 580 mm white with P or S trap front or back inlet and foot rests any pattern complete Including provision of lime comcrete bedding (excluding flushing cistern and flush pipe) complete all as specified & directed. |
| 42 | S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed by EIC. |
| 43 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed. |
| 44 | S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed. |
| 45 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. |
| 46 | S & F in repair health faucet fining in pipe complete with (ABS body ) mild steel chromimum plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including connection and fixed in position complete in all respect as specified. |
| 47 | S&F stainless stell towel rail of size 600mm complete all as specified & directed. |
| 48 | S&F rotational moulded polyethylene water storage tanks of 1000 ltr capacity,(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I & as directed. |
| 49 | S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed. |
| 50 | M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed. |
| 51 | M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed. |
| 52 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 53 | S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 54 | S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 55 | S&F PVC (SWR) bends 110mm dia any radius as in repair all as specified and directed. |
| 56 | S&F PVC (SWR) vent cowl 75mm fore fixed with pipe complete all as specified and as directed. |
| 57 | S&F PVC (SWR) pipes 150mm dia single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as directed. |
| 58 | S&F PVC (SWR) bends 75mm dia any radius as in repair all as specified and directed. |
| 59 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil. |
| 60 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 61 | Filling of approved eath (obtain form outside of MD Land) including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base as filling as sub base all as specified and diretced. (Approved earth shall be approved by GE). |
| 62 | M&L Antitermite treatmanet treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface. |
| 63 | M&L Antitermite treatmanet Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall. |
| 64 | S&F soap dish of stainless steel fixed to wall with chromium plated brass screws fixed in repair complete all as specified & directed. |
| 65 | S&F in repairs shower rose, chromium plated brass, fancy type, 125 mm with or without swivel joint, any size, including fixing to steel pipe or union, complete all as directed. |
| 66 | S&F stainless stell towel rail of size 600mm complete all as specified & directed. |
| 67 | S&F Wash basins white, vitreous China, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified & directed. |
| 68 | S&F in repairs, fancy type15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified & directed. |
| 69 | S&F 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed complete all as specified and as directed. |
| 70 | S&F in repairs 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms). |
| 71 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 72 | Material & Labour for PCC 1:3:6 type C2 using 40mm graded aggregate as in foundation, filling, sub base etc complete all as specified and as directed. |
| 73 | M & L for Chequred cement corcrete tile 20cm x 20xm x 25 mm thick with grey cement and pigments, set, jointed and pointed in grey cement slurry and pigments in floor laid over and incl 15mm thick screed bed or bedding layer in CM(1:6) |
| 74 | M&L for Providing, cement concrete 1:2:4 type B1 using 20mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 75 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in soft / loose soil complete all as specified and directed |
| 76 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified & directed. |
| 77 | M&L for rolled mild steel section such as angle etc as in post and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, Flat iron fillets (for securing wiremesh etc ) including all necessary drilling , bolting or riveting etcand similar works conforming to Fe 410-0 or Fe 310-0, ccomplete all as specified and directed |
| 78 | Supply only Chain link MS galvanisd fencing,4mm dia of wire 100mmx100mm spacing size or type complete all as specified and directed as per Engr-in Charge directed |
| 79 | Fixing only chain link fencing including line wires and mesh size type of stadrads bolts, etc size of mess 100x100mm & 4mm dia wire |
| 80 | S/F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties/tie bars for roof/Chain link including securing bolts complete all as specified and directed |
| 81 | S/F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 Cm long and dia of shank 11 to 15mm complete. |
| 82 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) with and including taking down the same. Please Enable Macros to View BoQ information |
| 83 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) with and including taking down the same. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 days