Tender For Repair To Roads, Path, Road Berms And Road Furniture At Pal Ur Mil Station Under Ge Pal Ur.
Tender Value
60 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
23 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roads, Path, Road Berms And Road Furniture At Pal Ur Mil Station Under Ge Pal Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces, depth exceeding 50mm but not exceeding 100mm deep and area not exceeding 400sqm complete all as specified. |
| 2 | Removing scarified materialn n exc,50m and depositing where directed at a level n exc. 1.5 m above starting point complete all as specified and directed. |
| 3 | Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal watering & well ramming, (including supply of road metal) complete all as specified and directed. |
| 4 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed. |
| 5 | Water bound macaadam 150mm thick (Compacted thickness) laid with coarse aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size) using granite, trap or basalt stone of best quality locally available spread and rolled with 10 to 12 tonnes power roller, each layer will be consolidated separately and to required gradient and camber, complete all as specified. |
| 6 | Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc, applying evenly a priming/ tack coat with bituminous primer using paving bitumen @ 10 kg per 10 sq metre of road surface, complete all as specified. |
| 7 | Providing premix bituminous macadam (consolidated thickness 75mm or less) with 4% binder content of paving bitumen by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 tonne power roller, complete all as specified and directed. |
| 8 | M/L for preparation of existing black top surfaces and Applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sqm surfaces complete all as specified and directed. |
| 9 | M&L for laying bituminous premix asphaltic semi-dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumin of Grade V-30, rolled and compacted to required camber and gradient with 8 to 10 tons power roller complete all as specified and directed.Note : Bituminous premix shall be mixed in hot mix plant and premix carpet shall be laid in single layer with self propelled mechanical paver. |
| 10 | Painting lines arrows, dashes letters etc on road pavement 2.50mm thick using hot applied thermo plastic road marking paint ( white or yellow) mixed with radium glass beads @ 250gm per sqm with automatic machine to provide reflectivity and night vision ( appx temp being 160 degree centigrade at the time of laying incl cleaning the surface of all dirt, dust & other foreign materials, demarcation at site and traffic control. Complete all as specified. |
| 11 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 12 | S & F in repairs solar stud made out of casting, with 3 LEDs on each side, fixed with epoxy compound including cleaning of existing surface complete all as directed by Engineer-in-Charge including taking down old unserviceable one. |
| 13 | Supply and fixing in repairs cat eye reflective type of metal body alloy of size 100mm x 100mm x 20 mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions all as specified and directed. |
| 14 | S&F in repair road safety polycarbonate convex mirror 80 cm dia encased in ABS materials, orange colour for outdoor installation including 3.0 m long and 75 mm dia MS pipe as stand, fixed to ABS frame with proper fixing arrangement (stand painted with two coats of synthetic enamel paint over one coat of red oxide primer), fixed on ground in PCC block of size 45 cm × 45 cm × 50 cm of PCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) and including necessary excavation, earthwork and removal of soil to a distance not exceeding 50 m, complete all as directed by Engineer-in-Charge.Model/Make: 3M / 7M / Dark Eye or equivalent as approved by GE. |
| 15 | S&F in repairs for pre coloured UV stablized rubberized road bumps 53mm high and 350mm wide of colour black and yellow with two night reflectors fixed both sides of the bump, complete all as specified |
| 16 | M&L for 75 mm thick PCC 1:3:6, type C-2 (Using 40 mm graded crushed stone aggregate) as in sub base etc and finished even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete and including demolition of existing tiles and removal outside the MoD land . complete all as specified and as directed. |
| 18 | S&F in repairs continuous brick edging with old size sub class B bricks equal to the depth of the brick, laid on end vertically incl. all necessary excavation of earth work. complete all as specified and as directed. |
| 19 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 20 of tender doucments. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 days