Tender For Comprehensive Maintenance Of External Water Supply/ Rising Line Including Motor Pumps And Other Equipment With Connected Items At Mil Stn Dhrangadhra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
11 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of External Water Supply/ Rising Line Including Motor Pumps And Other Equipment With Connected Items At Mil Stn Dhrangadhra
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed. |
| 3 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 4 | Taking down old unserviceable 100mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 5 | Taking down old unserviceable 150mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 6 | Taking down old unserviceable 200mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 7 | S&F, in replacement of cast iron sluice valve 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed . |
| 8 | S&F, in replacement of cast iron sluice valve 100 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed . |
| 9 | Repair and servicing of sluice valve of 150mm incl renewal of perished rubber gasket, material washer, spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified. |
| 10 | Repair and servicing of sluice valve of 100mm incl renewal of perished rubber gasket, material washer,spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified. |
| 11 | S&F in replacement of 150mm bore, cast iron, reflux valve (non return valve) dual flanged type conforming to IS 1538, including brass lock nuts, washers, rings SS Nuts and bolts, gaskets complete all as specified and directed. |
| 12 | S&F in replacement of 100mm bore, cast iron, reflux valve (non return valve) dual flanged type conforming to IS 1538, including brass lock nuts, washers, rings SS Nuts and bolts, gaskets complete all as specified and directed. |
| 13 | Supply and fixing of Ductile Iron pipe with spigot and socket ends, suitable for tyton joints, class K-9 laid in trenches, or under floors or fixed to walls, for 200mm bore size of pipe complete all as specified and directed. |
| 14 | Supply and fixing of Ductile Iron pipe with spigot and socket ends, suitable for tyton joints, class K-9 laid in trenches, or under floors or fixed to walls, for 150mm bore size of pipe complete all as specified and directed. |
| 15 | Supply and fixing of Ductile Iron pipe with spigot and socket ends, suitable for tyton joints, class K-9 laid in trenches, or under floors or fixed to walls, for 100mm bore size of pipe complete all as specified and directed. |
| 16 | M&L for cutting of Road/PCC path, hard standing depth not less than 60cm and width not less than 45cm for laying water supply pipe and making good the existing surface with PCC (1:2:4) type B-2 of 150mm thick complete all as specified and directed by Engr-in charge |
| 17 | M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of CI/GI/DI pipe complete all as specified and directed 150 mm size bore for 100 mm pipe complete all as specified and directed. |
| 18 | M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of CI/GI/DI pipe complete all as specified and directed 200 mm size bore for 150 mm pipe complete all as specified and directed. |
| 19 | Repairs / rewinding of centrifugal motor of cap 2/3 HP 3Phase, 415 Volt, by removing burnt winding and rewinding with super enamelled copper winding wire with same as existing turn & gauge to achieve desired including replacement of bearings complete and couple with the existing pump and testing complete as per directed by Engr-in-charge. |
| 20 | M&L in replacement of Terminal plate cover made of CI terminal plate for 60/120 HP centrifugal motor ,best quality including dismantling/taking out of unserviceable terminal plate of any make and type complete all as specified and directed |
| 21 | Attended the complaint of Star delta starter any type /make capacity 60 HP including replacement of U/S parts sch as over load relay/contracter/single phase preventer and wiring as required to made the starter serviceable condition complete all as specified and directed.(Note : Spare parts shall be measured and paid separatly ) |
| 22 | Replacement of Sparekit unit for ML-4 contactor 66-110 Amps complete fixed in repairs all as specified and directed. |
| 23 | Replacement of Over load relay for ML-4 contactor of relay range 66-110 Amps complete fixed in repairs all as specified and directed. |
| 24 | Replacement of Timer switch unit star- delta starter 60 HP |
| 25 | M&L in replacement of Electronic motor protection relay to protect the motor against over load phase loss, phase unbalance, phase reversal and stalling in single compact unit with field sutaible time and current rating, suitable for 20 to 60 HP motors |
| 26 | Repair/replacement of DOL starter suitable for 3 HP to 7.5 HP electric motor, 3 phase, 415 volts, 50 c/s including dismantling/taking out of unserviceable starter of any make and type complete all as specified and directed |
| 27 | M&L for DI Specials and fittinng as per IS for spigot and socketed DI pipes for water mains, branches, links such as bends(any type), reducers and angles, tappers any type, bends increasing/ decreasing or double sockets etc. Tee pieces, single branches, double branches (all socket and spigots) collers, cap and plug suitable for pipelines upto 250 mm bore complete all as specified and directed. |
| 28 | Taking down old unserviceable CI butter fly valve of any make and size and supply and fixing of new CI Butter fly valve slim seal design with nitrile rubber lined seat with clutch lever (p10) of size 100 mm conforming to IS 13095, at pump house complete all as specified and as directed. |
| 29 | M&L for surface cleaning of all the below mentioned items and scrapping the old paint from the surface and one coat of red oxide / primer after cleaning including preparation of old steel surface exceeding 10 cm width or girth and painting with two coat of synthetic enamel paint on machineries/ equipments/ shutter/motors / pumps / pipelines / panels and any other parts connected to pump houses with paint of approved colour using spray gun complete all as specified and directed. |
| 30 | Supplying and laying in replacement of old unsv synthetic Rubber insulated mats 3 mm thick for voltage upto 3300 volt for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m. complete all as specified and as directed. |
| 31 | Taking down old unserviceable and Supply and fixing cast iron love joy coupling (male-female) as per existing model for pump motor unit 20 HP by changing of motor position, including gas cutting welding, refitting and aligning of the same at pump house complete all as specified and as directed. |
| 32 | Taking down old unserviceable and Supply and fixing cast iron love joy coupling (male-female) as per existing model for pump motor unit of 60 HP by changing of motor position, including gas cutting welding, refitting and aligning of the same at pump house complete all as specified and as directed. |
| 33 | Taking out old damage Casing assembly and Supply and fix in replacement of Cast iron Casing assembly, suitable for 60 HP capacity pumps including removing and refixing of impeller, shaft, bearings, sleaves, seals with SS nut bolts, and re installation of Pump, metalising the shafts including welding works installed at pump house complete accessories all as specified and directed by Engr-in-charge. |
| 34 | Taking out old damage Casing assembly and Supply and fix in replacement of Cast iron Casing assembly, suitable for 20 HP capacity pumps including removing and refixing of impeller, shaft, bearings, sleaves, seals with SS nut bolts, and re installation of Pump, metalising the shafts including welding works installed at pump house complete accessories all as specified and directed by Engr-in-charge. |
| 35 | Repair/replacement and Supply, install, testing and commissioning of star- delta starter control panel powder coated suitable for 45 HP Submersible Pump set including star -delta starter 45 HP ,100 A TP MCCB,25KA Volt meter ,Ammeter ,motor protection against over load ,single phase preventer,instent over current,phase sequence reversal,ON-OFF push bottons, R-Y-B indication lamp,contractors and cable connections with cable glands,dry run protection complete all as specified and directed. |
| 36 | S&F in replacement of column pipe made out of GI heavy grade size 100mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed. |
| 37 | S&F in replacement of column pipe made out of GI heavy grade size 80mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed. |
| 38 | M&L for Lifting of UNSV submersible pump and motor (20 HP to 45 HP) complete set along with column pipe, safety rope and cable Approx 100 mtr depth with the help of employing chain pulley block and other T&P items all as specified and directed by Engr-in-Charge. |
| 39 | M&L for Lowering of submersible pump and motor (20 HP to 45 HP capacity) into 100 mtr deep bore well after connecting the cable and water proof cable joint and replacing of rubber gasket, nut and bolts and washers and fixing of protection clamp all as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 40 | M&L for Lowering of submersible pump and motor (20 HP to 45 HP capacity) into 100 mtr deep bore well after connecting the cable and water proof cable joint and replacing of rubber gasket, nut and bolts and washers and fixing of protection clamp all as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender