Tender For Repairs To Septic Tank, Manholes, Sewage Lines At B & C Colony, Necklace Area, Colonel Point, Ramnagar Area And Office Complex Under Age B/R Pashan Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Jul 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Septic Tank, Manholes, Sewage Lines At B & C Colony, Necklace Area, Colonel Point, Ramnagar Area And Office Complex Under Age B/R Pashan Pune
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for Cleaning under ground sewage line 150mm dia from manhole to manhole full of waste solids/liquid mud or sludge deposited in lines by rodding through mechanical means between manholes and removing sludge (obtained from cleaning of sewage line) to a distance exc 100M but n.exc 150M from the site and disposed off, Complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per SI item No 1 above but dia of pipe 200 mm Complete all as specified and directed. |
| 3 | Dewatering/Desludging of manholes (any size), desilting and removing sludge from manholes as in foul conditions by mechanically and removing of sludge up to a distance exc 150M and n.exc 200M and deposited in borrow pits including excavation of borrow pits and covered with 10cm thick layers of soil and disposed off surplus soil, refixing manhole cover etc depth of manhole n. exc 1.0 metre, Complete all as specified and directed by Engineer-in-Charge. |
| 4 | All as per item No 3 above but depth of manholes exc 1.0 metre and not exc 2.0 metre Complete all as specified and directed. |
| 5 | Material and labour for Dewatering / Desludging of liquid / mud / solids (work in foul conditions) from septic tank of any depth by mechanically and removing sludge out of MOD land, deposited in borrow pits including excavation for borrow pits and covered with 10cm thick layer of soil over sludge and spreading the balance soil near by in low lying area including taking up and refixing of covers of septic tank of 25 users, Complete all as specified and directed by Engineer-in-Charge. |
| 6 | All as per Srl No 5 above but septic tanks of 50 users Complete all as specified and directed. |
| 7 | All as per Srl No 5 above but septic tanks of 100 users Complete all as specified and directed |
| 8 | All as per Srl No 5 above but septic tanks of 150 users Complete all as specified and directed. |
| 9 | Material and Labour for Cleaning / removing blockage of 'S' trap/'P' trap/floor trap/Gully trap,nahani trap of any type mechanically and making fully functional at any location and at any floor in the area covered complete all as specified and directed. |
| 10 | Material and Labour for Cleaning /removing blockage of chocked EWC/IWC connected pipe line of any type mechanically and making fully functional at any location and at any floor in the area covered, Complete all as specified and directed by Engineer-in-Charge. |
| 11 | Excavating in trenches, n exc 1.5 metre wide and n exc 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, sewage line etc. n exc 10 Square Metre on plan and n exc 1.5 Metre in depth and getting out hard/dense soil, Complete all as specified and directed by Engineer-in-Charge. |
| 12 | All as per item No 11 above but depth exc 1.5 metre and not n.exc 3.00 Metre Complete all as specified and directed. |
| 13 | Demolition & breaking up drain pipes (salt glazedwere/AC/RCC ) set in CM,dia of pipe 150 mm dia, Complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and Labour, for PCC (1 : 3: 6 ) type C2(using 40 mm graded stone aggregate) as in bed to drain pipe including packing under & haunching against the sides of pipes of 150 mm dia after they are laid tested, Complete all as specified and directed by Engineer-in-Charge. Note: Thickness of bed below pipe shall be 10cm and width shall be outer dia of pipe plus 30cm. |
| 15 | Material and Labour for reinforced concrete pipes, class NP2, laid and jointed with collars of dia 150 mm, Complete all as specified and directed by Engineer-in-Charge. |
| 16 | Demolition & breaking up drain pipes (salt glazedwere/AC/RCC ) set in CM,dia of pipe 200 mm dia all as directed at site, Complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and Labour, for PCC (1 : 3: 6 ) type C2(using 40 mm graded stone aggregate) as in bed to drain pipe including packing under & haunching against the sides of pipes of 200 mm dia after they are laid tested, Complete all as specified and directed by Engineer-in-Charge. Note: Thickness of bed below pipe shall be 10cm and width shall be outer dia of pipe plus 30cm. |
| 18 | Material and Labour for reinforced concrete pipes, class NP2, laid and jointed with collars of dia 200 mm, Complete all as specified and directed by Engineer-in-Charge. |
| 19 | Removing excavated material to a distance upto 250m and depositing where directed at a level not exe 1.5m above the starting point, Complete all as specified and directed by Engineer-in-Charge. |
| 20 | Returning filling in including spreading ,levelling , watering & well ramming in layers not exe 25cm, Complete all as specified and directed by Engineer-in-Charge. |
| 21 | Demolition of brick work or stone/boulder masonry built in cement morter or cement lime mortar including all quoins, pillars, arches etc, and clearing off the premises, Complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and Labour for PCC 1 : 4 : 8 type D 2, (using 40 mm graded stone aggregate) for foundation filling and mass concrete, sub base etc, Complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material and Labour for pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks exc.10cm in width and setting in cement mortar 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material and Labour for rendering 15mm thick in cement mortar CM 1:4 on other than fair faces of brick/concrete surfaces finished even and smooth using WPC as per manufacturer instructions, complete all as specified and directed by Engineer-in-Charge.Note :- Integral water proofing compound shall be measured and paid separately as \\"Supply only\\". |
| 25 | Supply only liquid water proofing compound, Complete all as specified and directed by Engineer-in-Charge. |
| 26 | Demolition of reinforced cement concrete of any description and in any position above or below ground level, Complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and Labour for precast cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in landings,cover slabs for man holes etc and similar articles with plain faces set in cement mortar(1:4), Complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material and Labour for mild steel deformed TMT bars 6 to 8 mm dia and over cut to length bent to shape required including cranking bending spirally etc and binding with M.S. wire (annealed) not less than 0.9 mm dia or securing clip, Complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply and fix in repair 110mm dia PVC ( SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches, floor / Wall etc, Complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and fix in repair 110mm PVC (SWR) bends any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and fix in repair 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal, Complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fix in repair 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal, Complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and fix in repair 75 mm PVC (SWR) pipes cut to size and fixed in walls as in weep holes, Complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and fix in repair 75mm PVC (SWR) bends any radius, Complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fix in repair 75mm PVC (SWR) branch piece, single (single Y) equal or unequal, Complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fix in repair 75mm PVC (SWR) branch piece, double (double Y) equal or unequal, Complete all as specified and directed by Engineer-in-Charge. |
| 37 | Taking down cement plaster on brick / concrete / stone surface including raking out joints, hacking for key scrubbing down with water etc, Complete all as specified and directed by Engineer-in-Charge. |
| 38 | Material and Labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, Complete all as specified and directed by Engineer-in-Charge. |
| 39 | Material and Labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 but except stone, Complete all as specified and directed by Engineer-in-Charge. |
| 40 | Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression 20 mm on face from straight edge held against the dressed surface n exc. Granite or Trap Stone, Complete all as specified and directed by Engineer-in-Charge. |
| 41 | Material and Labour for keyed pointing to random rubble, uncoursed or brought upto courses in CM 1:3, Complete all as specified and directed by Engineer-in-Charge. |
| 42 | Material and Labour for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, Complete all as specified and directed by Engineer-in-Charge. |
| 43 | Material and Labour for preparation of newly plastered wall surface and applying two coats of acrylic weather proof paint over and including a coat of acrylic primer, Complete all as specified and directed by Engineer-in-Charge. |
| 44 | Material and Labour for PCC 1:3:6 type C2, (using 40 mm graded stone aggregates) as in surface channel and drains, Complete all as specified and directed by Engineer-in-Charge. |
| 45 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL), Complete all as specified and directed by Engineer-in-Charge. |
| 46 | Material and Labour for Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75 mm thick as in sub base, Complete all as specified and directed by Engineer-in-Charge. |
| 47 | Material and Labour for Cement concrete type B -1, 1:2:4 (20mm graded aggregate) 100 mm thick as in hardstanding, Complete all as specified and directed by Engineer-in-Charge. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing), Complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material and Labour for providing 40mm thick PCC 1:2:4 type B1 (using 20mm graded aggregate) as in sub base, Complete all as specified and directed by Engineer-in-Charge. |
| 50 | Material and Labour for 15 mm thick screed bed in CM 1:6 or bedding layer for laying floor finishes, Complete all as specified and directed by Engineer-in-Charge. |
| 51 | Material and Labour for cement concrete paving tiles 300X300X25mm thick, rubber moulded glossy finish with white cement and pigments set, jointed and pointed in net cement slurry in floors, and cut and polished, Complete all as specified and directed by Engineer-in-Charge. |
| 52 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of rubber moulded glossy finish M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of crushed stone sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, Complete all as specified and directed by Engineer-in-Charge. |
| 53 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for, Complete all as specified and directed by Engineer-in-Charge. |
| 54 | Material and Labour cement concrete for coping in PCC 1:3:6 Type C-1 ( 20mm graded aggregate) including necessary formwork, Complete all as specified and directed by Engineer-in-Charge. |
| 55 | Dismantling of wrought iron and steel work of any description and in any position as any fencing grills, Complete all as specified and directed by Engineer-in-Charge. |
| 56 | Material and Labour for MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, bolts etc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290) or grade E-165, Complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fix Hard drawn steel wire fabric weight n. exc 4Kg per sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia, Complete all as specified and directed by Engineer-in-Charge. |
| 58 | Dismantling fencing wire mesh, any type, Complete all as specified and directed by Engineer-in-Charge. |
| 59 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, Complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply only Chain link MS galvanised fencing, any size or type, Complete all as specified and directed by Engineer-in-Charge. |
| 61 | Material and Labour for preparation of new steel surfaces of any description not otherwise described exe 10cm in width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer, Complete all as specified and directed by Engineer-in-Charge. |
| 62 | Cutting to bituminous road in depth n.exc 1.5m and wide n.exc 1.50m for repairs to sewage line in any dia after repair/replace the sewage line to making good for the road cutting area with PCC 1:2:4, 100mm thick complete all as specified and directed by Engr-in-charge.Note : Items for reinforced concrete pipes, class NP2 and bed PCC are paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender