|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPECIAL REPAIR OF FOOTPATH IN FRONT OF HQ UB AREA FROM PUMP HOUSE NO 28 TO ASHOKA STAMBH CHOWK AT BAREILLY CANTT UNDER GE WEST BAREILLY Contract No : CWE / BLY / GE(W) /92 OF 2025-26 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete(un-reinforced), in any position and paving n.exc. 15 cm thickness (below or above ground level) including tile/ terrazzo floor etc complete all as specified and directed. |
| 3 | M & L for 75 mm thick cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base Complete all as specified and directed |
| 4 | M & L for hardcore of gauge not exceeding 40 mm of broken broken brick coarse aggregate, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | Providing and laying at or ground level factory made kerb stone of M-25 grade cement kerb stone of requisite shape and size fixed in position to the required line, level and curvature, jointed with cemnet mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5mm) including making drainage opening wherever required complete all as specified and directed. |
| 6 | M&L for 400x400 mm ( 10 to 12 mm thick ) out door heavy duty vetrified designer anti skid coloured tiles including designer borders tiles (Square/ rectangular) in floors/path/hard standing etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cm-1:6 Complete all as specified and directed |
| 7 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 8 | M&L brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 9 | M&L for plain cement concrete, type D 2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor /paving etc complete all as specified and directed. |
| 10 | M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) using newly surface even and smooth without using extra cement and necessary scaffolding complete all as specified and directed. |
| 11 | Material and labour for painting lines, arrows, letters etc on roads, pavements and the like exc. 10 cm wide road marking paint white, yellow and golder or selected colour complete all as specified and directed. |
| 12 | Material and labour for painting lines, arrows, letters etc on roads, pavements and the like exc. 10 cm wide by applying 2 mm thick thermoplastic road marking paint of specified shade/colour either continious or broken lines to the required width and length over the existing painted furfaces/ new bituminous surfaces with solvent based thermoplastic road marking paint using semi automatic thermoplastic paint applicator machine driven by exparienced operator on road inlcuding all materials, labour, T&P and cleaning dirt, seals, oil, greases and foreign materials etc of road surface complete all as specified as directed.(Note thermoplastic road marking paint shall be applied as per manufactures instruction alongwith MORTH technology and speciality) |
| 13 | M&L two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, complete all as specified and directed. |
| 14 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection DA -952 including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 15 | Supply and fixing cat eye solar reflective type of metal body (selected colour approved by GE) alloy of size 125mm x 110mm x 80mm with PAMA striplens reflector of model No. DA 971 P fixed with and incl MS stud of suitable size as per manufactures instructions all as specified and directed, |
| 16 | S & F in repair Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed, |
| 17 | S & F Reflective Radium Waterproof Warning Tape high intensity, night safety tape for road safety total with of each strip min 50mm wide complete all as speicified and directed . |
| 18 | S&F of unit/directional/road sign board made of stainless steel sheet 2 mm thick fixed on both side properly revited/welded to inner frame of stainless steel squre pipe of size 30mmx30mmx3mm fixed with welding to outer frame of board of size 50mmx50mmx3mm square pipe of stainless steel. Outer frame is welded to 02 Nos stainless steel Pipe of 50mm dia steel poles of 2600mm height. Retro reflective regulatory board of over all size min 1500 mm x 900mm, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, logo, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. Staiinless steel pipes should be min 16 gauge (SS 304 Gde) welded to the frame with adequate anti-theft arrangement . Board to be fixed on ground incl excavation and grouting in PCC 1:2:4 type B1, 20mm graded aggrigatge of size 300mmx300mmx400mm deep complete in all respects as per direction of Engineer-in-charge. |
| 19 | S & F in repalcement for pre-coloured highly resistance to serve impacts and harash weather speed breaker approx size of each piece730mmx245mmx70mm height 70mm Model No DA 10056 Design Patent No 206431 weight of each peice approx 2160 gms complete all as speicified and directed |
| 20 | S & F in repair for Convex mirror of dia 1000mm made of PC meterial provided with suitable SS Pipe post (min 2100mm lenghth ,75mm dia) and fixing arrangement as per site requirement it should have clear and deficate mirror image valving 130 degree of viewing angle and unbreakable and stronger than glass complete all as speicified and directed |
| 21 | S&F stainless steel tubing of any diameter or square or rectangular in shape,medium grade AISI-316 type austhetic anticorrssive in nature as in framed work/Posts/fencing work/ railings/grills/designer work etc (Designer wk as approved by GE) including cutting, bending required shape , welding, grinding, buffing and bright polishing the welded joints and adjacent areas and necessary fixing arrangement and flange etc in any type of location complete all as speccified and as directed. |
| 22 | M&L for painting to old steel surface, exc 10 cm width or girth, with one coat of synethic enamel paint complete all as specified and directed |
| 23 | M & L for RCC 1:2:4 nominal mix using 20mm grade stone aggregates in slab etc, and the like including necessary form work complete all as specified and as directed . . |
| 24 | Mild steel bars TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed . |
| 25 | M&L for Machine pressed precast conctete coloured interlocking paver block with cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over and including 25mm thick sand cushioning including watering and consolidation including demolation/dismantling existing surface complete all specified and directed. |
| 26 | M& L for coloured Chequered cement concrete with grey cement and pigment tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 27 | M&L for Plain Cement Concrete 1:2:4 type B-1 using 20 mm graded aggregate edging etc complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
