|
| 1 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed. |
| 2 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm and refixing in same opening after resecuring or easing or ruffling etc each complete all as specified and directed. |
| 4 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 5 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 6 | S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, including M&L for necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed |
| 7 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, including M&L for necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed. |
| 8 | S & F 30 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 9 | S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., with, edges of framing with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkhats complete all as specified and directed. |
| 10 | Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47mmx47mm (19 gauge) all as specified and directed. |
| 11 | S & F factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides & as gap insert for top- rail and bottom rails. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.complete all as specified and directed |
| 12 | S&F in repair for steel windows with side hung shutter including box /barrel type hinges with steel handle and peg stay, complete with glazing and guard bars, complete all as specified. |
| 13 | all as per Item No 12 above here- in –before but for without glazing bar complete all as specified and directed |
| 14 | S & F in repair steel ventilator with top hung shutter including hinges of steel, peg stay etc. complete all as specified |
| 15 | S & F in repairs Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm complete all as specified and directed. |
| 16 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed. |
| 17 | S & F 100 mm long medium weight, stainless steel Butt hinges with screws complete all as specified and directed. |
| 18 | S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed. |
| 19 | S & F mild steel pressed handle, oval type, stove enamelled black size of handle 125mm ISI marked .complete all as specified and directed |
| 20 | Supply and fix mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed. |
| 21 | S&F mild steel 300 mm long ordinary rat rail rodpattern helical door springs, including roller and roller plate complete all as specified and directed. |
| 22 | S & F 125 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 23 | S & F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed. |
| 24 | S & F in repairs 75 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed. |
| 25 | S&F in repairs 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed. |
| 26 | Supply and fix in repairs mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed. |
| 27 | S & F in repair 0.56 mm thick plain Aluminium sheeting, Alloy 31000 H4 in drip and straight flashing and in coverings ofdoor shutter complete all as specified and directed. |
| 28 | S & F in Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 29 | S & F in repair Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed. |
| 30 | S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads n exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. |
| 31 | S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 32 | S & F in repairs Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.(Note -Bldg height is Aprrox up to 11 m Necessary scafolding shall be included in the cost ) |
| 33 | S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.(Note -Bldg height is Aprrox up to 11 m Necessary scafolding shall be included in the cost ) |
| 34 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 35 | M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast and similar work etc complete all as specified and directed. |
| 36 | M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth using extra cement complete all as specified and directed. |
| 37 | S&F Glass dividing strips 3mm thick 38mm wide complete all as specified and directed. |
| 38 | M&L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 39 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 40 | M & L for 75 mm thick cement concrete 1:3:6 type C-2 ,using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:2,finished surface even and fair without using extra cement with and including all necessary formwork to divide the area in panels,finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one partbof hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed. |
| 41 | Demolition of Concrete of any description and in any position not otherwise specifically provided for RCC |
| 42 | M&L for Form work to soffits of suspended slabs,shelves flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 43 | M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed. |
| 44 | M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 45 | M&Lfor Cutting down existing tree any girth on roof/wall of bldgs, grubbing roots including necessary cutting and filling holes with cement mortar 1:4 or PCC 1:2:4 type B-1 making good to disturbed portion of brick work and cleaning site, complete all as specified and directed. |
| 46 | M&L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in 1:6 cement mortar including demolition of old brick work complete all specified and directed. |
| 47 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement. |
| 48 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including taking down old plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed (Note -Bldg height is Aprrox up to 14 m Necessary scafolding shall be included in the cost ) |
| 49 | M&L for rendering 12mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed. |
| 50 | M&L for rendering 5 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement including taking down plaster from ceiling and scrubbing down with water etc complete all as specified and directed |
| 51 | M&L for applying 2 mm thick layer of wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed. |
| 52 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 53 | M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 54 | M&L for preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls complete all as specified and directed. |
| 55 | M&L for preparing new plastered surfaces and applying Two coats of Oil bond distemper on surfaces of walls complete all as specified and directed. |
| 56 | M&L for preparing old plastered surfaces and applying one coats of cement base paint on surfaces of walls complete all as specified and directed. |
| 57 | M&L for preparing old plastered surfaces of walls by brushing, scrapping down smoke soot mouldsby steel wire brush applying one coats of white wash complete all as specified and directed. |
| 58 | M&L for preparing old plastered surfaces of ceiling by brushing, scrapping down smoke soot moulds by steel wire brush applying one coats of white wash complete all as specified and directed. |
| 59 | M&L for preparing old plastered surface by brushing, scrapping down smoke soot mouldsby steel wire brush including filling dipression surfaces with putty applying one coats of Oil bond distemper on surfaces of walls complete all as specified and directed. |
| 60 | M&L for preparing old painted ceiling surfaces and applying a coat of distemper oil emulsion complete all as specified and directed. |
| 61 | M&L for preparation of new wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 62 | M&L for preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 63 | M&L for preparation of old wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed. |
| 64 | M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 65 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc |
| 66 | M & L for machine cut kota stone slab flooring 20-25 mm thick over and including M&L for 15mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed. |
| 67 | M & L for machine cut kota stone 20-25 mm thick slab for skirting, dado, riser etc over and including M&L for 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing all as specified and directed. |
| 68 | M&L for 15-18mm thick Marble (Green or coloured) stone for floor, steps, jambs, pillars, window cills, cooking platform and like 13-15mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including M&L for 15mm thick screed in CM 1:6 complete all as specified and directed |
| 69 | M&L for Non - skid coloured ceramic tiles 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid on floor surface jointed and pointed with coloured cement to match over and including M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directedby Engineer-in-Charge. |
| 70 | M & L for non- skid ceremic coloured tiles 7mm to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including M&L for dismantling of floor tiling and 15mm thick screed bed in cm-1:6 all as spd or as directed. |
| 71 | M&L for coloured printed glazed ceramic tiles 7mm to 8 mm thick on walls dado/skirting (square/ rectangular) of 300mmx200 mm jointed and pointed with coloured cement to match over and including M&L for 10 mm thick rendering of cement mortar 1:4 and dismantling of existing tile including cement mortar bedding complete all as specified or as directed. |
| 72 | M&L for coloured printed glazed ceramic tiles 7mm to 8 mm thick on walls dado,/skirting (square/ rectangular) of 450mmx300 mm jointed and pointed with coloured cement to match over and including M&L for 10 mm thick rendering of cement mortar 1:4 and dismantling of existing tile including cement mortar bedding complete all as specified or as directed. |
| 73 | M&L for Vitrified tiles (light shade) 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 cement and dismantling of floor tile including cement mortar bedding complete all as specified and as directed by Engineer-in-Charge. |
| 74 | M&L for Vitrified tiles (light shade) 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including M&L for 10mm thick rendering in cm 1:4 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge. |
| 75 | M&L for 400mmx400 mm out door vetrified designer anti skid coloured tiles including designer borders tiles (Square/ rectangular) floors/path/hard standing etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including M&L for 15mm thick screed bed in cm-1:6and dismantling of old existing tile all as spd & as directed. |
| 76 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity 500 Ltr to 1000 Ltr. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 77 | Cleaning and removing all scale and dirt, etc from tanks capacity exc 250 ltr but n exc 500 ltr and from mouths of circulating pipes etc. complete all as specified and directed. |
| 78 | S & F Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tank capacity exc 250 but n exc. 500 litre complete all as specified and directed. |
| 79 | S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 15mm tubes complete all as specified and directed. |
| 80 | S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 20mm dia tubes complete all as specified and directed. |
| 81 | M&L for Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) Taking up or down of 15mm tubes complete all as specified and directed. |
| 82 | M&L for Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) including taking up or down of 15mm tubes complete all as specified and directed. |
| 83 | S & F in repairs 15 mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 84 | S & F in repairs 15 mm bore Chromium plated Angle/Stop valves fency type (straight or angular), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 85 | S & F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed. |
| 86 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 87 | S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 88 | S&F in repairs Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and directed |
| 89 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 90 | S&F for in repairs CP Brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges with both side holders complete all as specified and directed |
| 91 | Supply and fix in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood on PVC frame complete all as specified and directed. |
| 92 | S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550mmx400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed. |
| 93 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 94 | S&F in repair 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed. |
| 95 | S & F in repair Sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495 mm x 420 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed. |
| 96 | S & F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed. |
| 97 | S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed. |
| 98 | S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580mmx440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed. |
| 99 | S & F in repairs Vitreous China water closet Padestal pattern white, including mild steel chromium plated or aluminised hinging device seat cover size 630mmx450 mm size white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed. |
| 100 | S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed. |
| 101 | Taking down eaves gutters and rainwater pipes (any size or pattern AC/PVC/CI), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 102 | S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed. |
| 103 | S & F 110 mm borePVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed. |
| 104 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 105 | S & F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed. |
| 106 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 107 | S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 108 | S & F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 109 | S & F 75/100 PVC (SWR) floor trap, nahani trap, etc plain with grating including jointing with solvent cement complete all as specified and directed |
| 110 | S&F Repairing of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed by Engr-in-charge. |
| 111 | Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. complete all as specified and directed |
| 112 | S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600mmx 600mm fixed with and including anodised GI prepainted snap grid with 25mmx25mmx1.5 mm thick Tee section and 38mmx25mmx2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including complete all as specified and directed. |
| 113 | Supply and fix in repair Powder Coated (Thickness or powder coating notless than 50 micron). anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified. |
| 114 | S&F in repairs Powder Coated (Thickness or powder coating notless than 50 micron). anodised Aluminium door shutters pull and push type (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, etc and panel inserts of 5mm thick tinted glass/ prelaminated particle board (Novapan) panel in each door and making good of wall surface to match existing surface complete all as specified and directed, comprising of (aluminium anodised section and aluminium anodised fitting as following :-a) Rails (Top & Bottom) of section- 114.30mm x 44.45mm x 1.49 mm thickb) Lock rail of section- 83.50mm x 44.45mm x 1.70 mm thickc) Stiles of section- 85mm X 44.45mm X 1.40mm thickincluding 2 handles, hinges etc |
| 115 | S&F in repairs aluminium anodised window/ventilator with fixed aluminium frame of size 63.50 mmx 38.10mm x 1.41 mm thick fixed in vertical position with aluminium vertical members and 4.8 mm thick tinted glass including rubber beading and aluminium glazing clips complete all as specified. |
| 116 | S&F for in repairs Aluminium body(die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg. icomplete all as specified and directed |
| 117 | Supply and fix in repair 140mm long Floor door stopper made of double Aluminium rod and hard rubber shoe fixed with steel screws complete all as specified and directed. |
| 118 | S&F in repairs waste pipe 32mm dia 1mtr long complete all as specified and directed |
| 119 | S&F in repairs PVC connections 15mm size with PTMTnuts of length 450mm complete all as specified and directed |
| 120 | S&F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed |
| 121 | S&F in repairs Bib tap standard of PTMT any colour highpressure screwed for iron pipe and fixed. (Minimum weight15mm-90gms/20mm-125gms). complete all as specified and directed |
| 122 | S&F in repairs Pillar taps of PTMT any colour high pressurescrewed for iron pipe and fixed.(Minimum weight 15mm-110gms)® complete all as specified and directed |
| 123 | S&F in repairs 25 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 124 | S&F in repair Grating doom 100mm dia of PTMT(Minimum weight 25gms) complete all as specified and directed |
| 125 | S&F in repairs plate rack made out of 1mm thick stainless steel sheet of size 36”x31”x10” with all internal fitting (as per sample complete ) complete all as specified and directed |
| 126 | M&L for Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) complete all as specified and directed |
| 127 | Supply only liquid waterproofing compound all as specified. |
| 128 | S&F in repairs 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 129 | S&F in repairs factory made PVC cupboards frame of the size 75 mm x 40 mm with a wall thicknesss of 5 mm made out of extruded 5mm thick plain/prelam PVC sheet of density 600kg/cbm, having bottom width of 50mm and thickness of 10 mm. All four frame lengths reinforced with 19 mm x 19mm M.S.square tubes of 19 quage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 15mm long brackets of 15 mm x 15 mm M.S. square tubes. the door frame shall be fixed to the wall using 8/100 long MS screw through the frame by using PVC fastners. A minimum of 4 nos of screws to be provided for each vertical members and minimum of 2 nos of screw to be provided horizontal members etc. complete as per direction of Engr-in-charge, manufacturer's specification and drawing. complete all as specified and directed |
| 130 | S&F in repair factory made PVC cupboards flush type shutter of 30 mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19mm x 19 mm for stiles and rails. The inside panels shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both sides of inside panels including necessary item to fix the shutters to frame such as 100 mm stainless steel hinges (06 Nos Each Shutter), 100 mm long handles(02Nos Each Shutter)150mm long barrel tower (02Nos Each Shutter), made of anodised aluminium and magnetic ball catch(01 Nos Each Shutter), for each pair of shutters. all four edges of the panels to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2nos PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete as per direction of Engr-in- charge |
| 131 | S&F in repair factory made PVC shelf/partition of required size consisting of panel of Min 20 mm thick WPC Plain/Color and for supporting the hold of shelf/Partition and shall provided 3 gdges in size 18 mmx18 mm as per required lenght. The front side of the edge visible in the front of the shelf/partition to be edge lipped by 18 mmwidthx1 mm thick PVC sheet using solvent cement etc reqired length. complete all as specified and directed |
| 132 | S&F aluminium anodised 125 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed in repair with screws complete all as specified and directed. |
| 133 | M&L for writing letters or figures (Block, Roman, Italic or Indian) for Marking Block and Bldg No n.exc 30cm high with synthetic enamel paint complete all as specified & directed.(Bldg height is Aprrox up to 11 m Necessary scafolding shall be included in the cost ) |
| 134 | Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. Please Enable Macros to View BoQ information |
