|
| 1 | Complete removal of entire existing water proofing treatment in any position including tarfelt, Plaster, lean concrete of any thickness, gravels etc. and removing the debries out side MD land complete all as specified and directed. |
| 2 | M & L for PCC 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in roof surface complete all as specified and directed. |
| 3 | M&L for 10 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water Proofing compound shall be measured and paid for seprately as \\"Supply Only\\" |
| 4 | Supply only water proofing compound complete all as specified and directed. |
| 5 | Provding and carry out water proofing treatment to sound, moisture free concrete surface system includes preparation to remove loose dust, dirt, loose mortor, curing compound etc carry out cementious injction grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticised expandive ground admixture supplies in 225 gm pouch, treatment of construction joints using polymer modified mortor prepare by using Nitobond SBR latects, application of polymer modified battaat floor, wall junction, filling of annular space around rain water outlet using conbextra GP2 non shrink cementious grouts. Andulated surface and npot hole shall be treated with epoxy mortor or putty to obtained sound/levelled surface. Application of primer Nito proof WB primer on sound mortor slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurithane coating supplied in 25 kg drum coverage @ 2.30 Kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and tackles as per manufactures specification. Coating shall be having crackbriding of 2 mm, elonagtion (ASTMD 124 ) greater than 600 percentage, tensile strength (ASTM D412), 95 percenatge, 85 percentage of solid contantents, tear resistance (ASTM D624),15 KN/M, shore A hardness (ASTM D 2240), 60, water vapour transmission not more than 1 gm /M2, water permeability (DIN-1048) -NIL, services temperature -40'C to 70 degree 'c, flash point greater than 70 'C HSE guidelines:- It is recommanded to provide adequate general and local exhust ventillations, providing protection to Eye,face,Hand andother skin by wearing appropriate glouse, google, face cilid, respiratory protection etc, directed in SDS of the product. complete all as specified and directed. |
| 6 | M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without distrubing existing structure as per manufcturers instrction and froming agent like coreseal 357A/ coreseal 357C for carrying out nondistrctive waterproofing treatment of sunkun portion slab, floor and walls of bathroom, WC/WHB and floor traps (Combine Unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coating etc including cleaning of surfaces with wire brush, detecting the sources of leakage and reapairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like Coreseal 135A/ 135B without distrurbing existing structure complete all as per manufacturers instrctions and complete all as specified and directed.Make- Buildcore Chemicals/ Pidilite/ Chemistic/ Fosrock or any equivalent chemicals as per list of makes and as approved by GE. |
| 7 | M&L grouting the joints of flooring any type and any size of tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade 0.10 kg of hardener and 0.20 kg of resin per kg, including filling grouting and finishing complete all as specified and directed. |
| 8 | M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm ccomplete all as specified and directed. |
| 9 | M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make as approved by GE complete all as specified and as directed. |
| 10 | M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed. |
| 11 | Dismantling floor, sunkun floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 12 | M&L 25mm thick PCC 1:2:4 type B-0( wing 12.5 mm graded stone aggre) as in sub base of floor complete all as specified and directed. |
| 13 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 14 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 15 | M & L for vitrified colour Light shade Ceramic tiles 8 to 10 mm thick (square/ rectangular) dark shade /ultracharged polished,Light shade area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. |
| 16 | S&F, glazed ceramic tiles coloured 350 x 250mm/450 x 350mm 7 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering laid over and including 15 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed. |
| 17 | M & L for double charge coloured vitrified tiles 8 to 10mm thick (square/rectangular) of any colour and pattern as approved by GE, polished, area of each tile exc. 0.18 Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of dark shade tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 18 | M&L for double charged Ceramic Matt finish tiles 8 to 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc, laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed. |
| 19 | Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets/galvalume sheet/ fibre sheet in roof coverings complete all as specified and as directed. |
| 20 | Supply and fix for 0.50mm thick pre-painted galvalume (manglore pattern type)aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed. |
| 21 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets complete all as specified and directed. |
| 22 | Supply and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface /curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed. |
| 23 | Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 24 | Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 25 | Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed. |
| 26 | Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed. |
| 27 | Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 28 | Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 29 | S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete. Including taking up or down steel tubing and connections or removal to store complete all as specified and directed. |
| 30 | M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed. |
| 31 | Material and labour for PP-R gate valves (brass insert) of 20mm bore complete all as specified and as directed. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and directed. |
| 34 | Taking down shutters of any description, area not exc.1 sqm each complete all as directed. |
| 35 | Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and directed. |
| 36 | Taking down shutters of any description, area exc.2 sqm each complete all as specified and as directed. |
| 37 | S & F for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including PCC (1:3:6), type C-0, (using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed. |
| 38 | M & L for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed. |
| 39 | Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed. |
| 40 | Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 41 | S & F and repair for stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 42 | S & F for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed. |
| 43 | Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed. |
| 44 | Supply and fix for aluminium powder coated louvered ventilator with space for provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed. |
| 45 | S & F for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 46 | Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407 |
| 47 | S & F for fully glazed single/ double leaf openable door, using ‘Jindal ' or equivalant approved make aluminium powder coated sections on door floor spring, pivots, with 5 mm thick glass in panels fixed with aluminium glazing clips section No. 19381 and 19352 and PVC rubber beading all around including with 1” interlock and handle, two lever door lock, sliding wheel complete all as specified and as directed. Jindal section Nos : Top-19528, Middle – 19575, Bottom – 19530, Vertical – 19526, 1” Interlock (20939), 1” Handle (20602) |
| 48 | S & F for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked complete all as specified and as directed. |
| 49 | S & F for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked complete all as specified and as directed. |
| 50 | S & F for 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 51 | S & F for 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 52 | S & F for butt hinges, 100mm size, mild steel cold rolled, medium weight complete all as specified and as directed. |
| 53 | S & F for 75mm size butt hinges, extruded brass with mild steel hinge pin, bright polised and fixed type D-11 complete all as specified and as directed. |
| 54 | Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed. |
| 55 | Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed. |
| 56 | Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed. |
| 57 | Supply and fix in repairs for 300mm, mild steel, ordinary rat tail rod pattern spring (helical spring) including roller and roller plate complete all as specified and as directed. |
| 58 | Supply and fix in repairs for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed |
| 59 | Supply and fix in repairs for floor door stopper of brass body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed. |
| 60 | Supply and fix in repairs for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm all as specified and as directed. |
| 61 | Supply and fix in repairs for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed. |
| 62 | Supply and fix in repairs for 10mm thick corner glass of size 250mm x 300mm with stainless steel decorative type railing on front face and fixed with 3 Nos 'D' type stainless steel brackets complete all as specified and as directed. |
| 63 | Supply & fixing PVC bath cabinet, size 450 x 600mm, comprising of looking glass, space for bath soaps, shampoo, tooth brush and paste, handle towel rail, fixed as in repairs complete all as specified and directed. |
| 64 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed. |
| 65 | Supply and fix in repair for polycarbonate fibre glass reinforced plastic (FRP) translucent corrugated/ Plain sheeting 6.00 mm thick fixed with coach screw and washer in roof, wall etc.weather resistant, made from fine anti UV film and resins complete all as specified and directed. |
| 66 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 67 | M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement including preparation on old walls to receive new plaster complete all as specified and as directed. |
| 68 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement including preparation on old walls to receive new plaster complete all as specified and as directed. |
| 69 | Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed. |
| 70 | S&F in repair Table top Wash hand basin, vitrous china, coloured flat back of size 470 x 470 x 110 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed. |
| 71 | S&F in repair for vitreous China wash basin, white, flat back, size 550x450mm including necessary brackets, CP couplings, PVC waste pipes etc. complete all as specified and directed. |
| 72 | S & F in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed. |
| 73 | Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. |
| 74 | S & F in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding,10 ltr capacity PVC low level flushing cistern, all internal fittings, inlet, outlet pipe connections etc complete all as specified and as directed. |
| 75 | S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed. |
| 76 | S & F for 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed. |
| 77 | S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed. |
| 78 | S&F in repairs stainless steel grating doom 125mm dia complete all as specified & directed. |
| 79 | S&F in repairs Chromium Plated Toilet Roll Paper Holder with stainless steel flap complete all as specified and directed. |
| 80 | S&F in repairs Chromium Plated rail 600mm long complete all as specified and directed. |
| 81 | S&F in repairs Chromium Plated soap dish holder complete all as specified and directed. |
| 82 | S&F in repairs Chromium Plated soap dispenser with glass bottle complete all as specified and directed. |
| 83 | S&F in repairs Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed. |
| 84 | S&F in repairs 15mm dia bore, two way bib cock with wall flange, screwed down for UPVC/iron Pipe complete all as specified and directed. |
| 85 | S & F in repairs chromium plated Towel shelf 600 mm long complete all as specified and as directed. |
| 86 | S & F in repairs shower arm with wall flange by using quality assured material and advances techniques complete all manufactures specifications suitable for alive maze shower complete all as specified and directed. |
| 87 | S&F in repirs for 15mm dia bore bib taps chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron Pipe or for brass ferrule all as per Cat part No. PIS-06 (Neptune Series) of make Prayag or equivalent of Jaguar complete all as specified and directed. |
| 88 | S&F in repairs 15 mm bore pillar taps,CP fancy type complete all as specified and directed. |
| 89 | S & F in repair for 15 mm bore chromium plated, mixer for mixing hot and cold water screwed down for iron pipe including wall flanges complete all as specified and as directed. |
| 90 | S&F in repairs for CP 15mm dia bore stop valves/cock (concealed type),with long shank and cup complete all as specified and directed. |
| 91 | S&F in repairs for CP 15mm dia angle cock complete all as specified and directed. |
| 92 | S & F in repairs for 15mm dia CP bib tap long body with flange of make Prayag or equivalent complete all as specified and as directed. |
| 93 | S & F in repairs spindel of brass of any size/ type and in any position complete all as specified and directed. |
| 94 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 95 | S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 96 | All as per item as above but 110mm dia including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along along the centre line over fittings and accessories) complete all as specified and as directed. |
| 97 | M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and as directed. |
| 98 | All as per item as above but 110mm dia complete all as specified and as directed. |
| 99 | Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified & directed. |
| 100 | M&L machine cut Granite slab 18 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified and directed Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish to entire satisfaction of EIC. |
| 101 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed. |
| 102 | S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 103 | S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 104 | S & F for Modular kitchen cabinet and wall cabinet comprising of with including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of factory made moulded 18mm thick glossy/Matt Finish solid waterproof MDF board and outer door and topside shall be of 18mm thick perlam coloured solid MDF board, for fixing the items fitted in position and complete all as specified and directed. |
| 105 | S & F in repairs of steel windows for overhaulig, and restoring external steel windows, ventilators and doors, gates incl welding, cleaning to fully functional complete all as specified and directed. |
| 106 | S&F steel windows with side hung shutters including projecting type hinges with steel handles,steel peg stays complete with glazing bars, one leaf as with glazing and other as fly proof shutters, devotailed, welded complete all as specified and directed. Please Enable Macros to View BoQ information |
