|
| 1 | M&L for removing denting wherever required from the following furniture articles, making the surface smooth after removing old paint scrubbing with emery paper, removing existing treatment completely, filling putty at required places and spray painting in OG/ Grey/ Blue shade (as required) with two coats of 1st quality synthetic enamel paint complete all as specified and directed. |
| 2 | Almirah large steel/ Almirah large steel with locker (Drg No. FD-1031 & FD/E6/MAP/18) |
| 3 | Almirah Medium steel (Drg No FD-1032) |
| 4 | Locker steel (Drg No FD-127(M)/ FD-257/ FD-1029) |
| 5 | Rack steel off sizes (Drg No FD-81(M)/ FD-1023) |
| 6 | Table office officer steel (Drg No FD-84/ FD-1002/ FD-1003) |
| 7 | Table office clerk steel (Drg No FD-84/ FD-1004) |
| 8 | Table 3’ x 2’ without drawer (Drg No FD-1007) |
| 9 | Table 3’ x 2’ with drawer (Drg No FD-1008) |
| 10 | Table 3’ x 3’ steel (Drg No FD-1009) |
| 11 | Book shelf/ Book case steel. (Drg No FD-1028/ FD-69(M)) |
| 12 | Chair CB Steel with arms (Drg No. FD-75(M)) |
| 13 | Chair CB Steel without arms (Drg No. FD-75(M)) |
| 14 | Chair Verandha (Drg No. FD/E6/MAP/11) |
| 15 | Teapoy verandah steel (Drg No. FD-225 & FD/E6/MAP/17) |
| 16 | Rack shoe steel (Drg No FD/E6/MAP/02(R). |
| 17 | M&L for replacement of lock of following furniture articles with new GI lock 4 lever with duplicate keys to be fixed with machine screws of required size all as specified and directed:- |
| 18 | Almirah large steel/ Almirah large steel with locker (Drg No FD-67/ FD-1031) |
| 19 | Almirah medium steel (Drg No FD-67/ FD-1032) |
| 20 | Book case steel (Drg No FD-1028) |
| 21 | Table office clerk steel (Drg No FD-1004) |
| 22 | Table office officer steel (Drg No. FD-84/ FD-1002/ FD-1003) |
| 23 | Table 3' x 2' with drawer (Drg No FD-1008) |
| 24 | M&L for replacement of handle in various types of almirah steel and locker steel with new handle of mild steel/ GI heavy duty to be fixed with machine screws and bolts of required size all as specified and directed. |
| 25 | Almirah large steel/ Almirah large steel with locker (Drg No FD-67/ FD-1031) |
| 26 | Almirah medium steel (Drg No FD-67/ FD-1032) |
| 27 | Locker Steel (Drg No FD-127(M)/ FD-257/ FD-1029) |
| 28 | Book case steel. (Drg No FD-1028) |
| 29 | M&L for gas welding to frame of various steel furniture items including preparation of surface and removing the unwanted welding spots complete all as specified and directed. |
| 30 | M&L for removing existing unserviceable legs of following furniture articles and supply and fixing new legs as existing made of 1mm thick MS sheet welded as per best trade practice complete all as specified and directed. |
| 31 | Almirah large steel/ Almirah large steel with locker (Drg No. FD-1031/ FD/E6/MAP/18) |
| 32 | Almirah medium steel (Drg No. FD-1032) |
| 33 | Locker steel (Drg No FD-127(M)/ FD-257/ FD-1029) |
| 34 | M&L for removing 3 way locking device and chakar (excluding lock and handle) from the following furniture articles and supply & replacement with new 3 way locking device complete all as specified and directed:- |
| 35 | Almirah large steel/ Almirah large steel with locker (Drg No. FD-1031 & FD/E6/MAP/18) |
| 36 | Almirah medium steel (Drg No FD-1032) |
| 37 | M&L for replacement of broken/ damaged shelf/Door in the following furniture articles made out of 20 gauge MS sheet with clamps/ hinges made to shape as per existing complete all as specified and directed:- |
| 38 | Almirah large steel/ Almirah large steel with locker (Drg No. FD-1031 & FD/E6/MAP/18) |
| 39 | Almirah medium steel (Drg No FD-1032) |
| 40 | M&L for replacement of old unserviceable drawers with new drawer made out of 20 gauge MS sheet made to shape as per drg complete all as specified and directed:- |
| 41 | Table office clerk steel (Drg No FD-1004) |
| 42 | Table office officer steel (Drg No FD-1002/ FD-1003) |
| 43 | Table 3’ x 2’ with drawer (Drg No FD-1008) |
| 44 | CHAIR CB STEEL WITH/ WITHOUT ARMS (DRG NO FD-75(M)):- Removing the following broken/ damaged parts from chair tubular steel with/ without arms and replacing the same with new one complete all as specified and directed:- |
| 45 | New Seat frame of chair CB steel with arms made of well seasoned 1st class hardwood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5mm thick in Godrej pattern duly painted with two coats of black synthetic enamel paint in glossy finish over a coat of pink primer and fixed to frame with 04 Nos machine nuts and bolts of appropriate size with washer complete. |
| 46 | All as per Srl item No. 9.01 here-in-before but back of Chair CB Steel with arms. |
| 47 | All as per Srl item No. 9.01 here-in-before but seat of Chair CB Steel without arms. |
| 48 | All as per Srl item No. 9.01 here-in-before but back of Chair CB Steel without arms. |
| 49 | New Arms of chair CB steel with arms made of well seasoned 1st class hard wood and duly painted with two coats of black synthetic enamel paint in glossy finish over a coat of pink primer and fixed to frame with wood screw of appropriate size complete. |
| 50 | PVC toes to chair CB steel with/ without arms of standard approved quality. |
| 51 | PVC plug to the top of chairs CB steel with /without arms of standard approved quality. |
| 52 | CHAIR REVOLVING FOR COMPUTER (DRG NO TP)Removing the following broken/ damaged parts from chair revolving computer and replacing the same with new one complete all as specified and directed:- |
| 53 | Seat made of 75mm thick foam with new tapestry cloth cover of good quality of cost not less than Rs. 250/- per metre on and including 12mm thick ply seat bottom complete. The bottom part of the seat should be covered with black colour nylon cloth as directed. Colour and pattern of cloth shall be as approved by GE. |
| 54 | Back made of 75mm thick foam with new tapestry cloth cover of good quality of cost not less than Rs. 250/- per metre including 12mm thick ply back support complete. The joints of tapestry cloth should be provided with rubber/ nylon lipping as directed. Colour and pattern of cloth shall be as approved by GE. |
| 55 | Seat and back cover as per srl item No 10.01 & 10.02 above complete as directed |
| 56 | Hydraulic system heavy duty with PVC cover. |
| 57 | Caster wheels. |
| 58 | Base chromium plated. |
| 59 | Arms as per existing. |
| 60 | Tilt mechanism. |
| 61 | CHAIR REVOLVING EXECUTIVE (DRG NO TP) Removing the following broken/ damaged parts from chair revolving executive and replacing the same with new one complete all as specified and directed:- |
| 62 | Seat and back cover and foam cushion with new rexine good quality not less than Rs. 350/- per metre in dark colour as per approved sample complete as directed. |
| 63 | Hydraulic system heavy duty with PVC cover. |
| 64 | Base chromium plated. |
| 65 | Caster wheels. |
| 66 | Arms as per existing. |
| 67 | Tilt mechanism. |
| 68 | CHAIR VERANDAH (DRG NO FD-359) |
| 69 | M&L for removal of old paint and painting with two coats of white synthetic enamel paint including preparation of surface complete all as specified and directed. |
| 70 | M&L for gas welding to frame of various steel furniture items including preparation of surface and removing the unwanted welding spots complete all as specified and directed. |
| 71 | Removing old newar from chair verandah and re-caning of Chair Varandha with half round plastic cane 4 mm wide, 0.5mm thick white colour for seat and back complete all as specified and directed. |
| 72 | CHAIR VISITOR/ CHAIR WRITING CUSHIONED WITH ARMS (DRG NO TP)Supply and fixing in replacement of following unserviceable parts of chair visitor/ chair cushioned with arms all as specified and directed:- |
| 73 | Seat made of 75mm thick foam with new tapestry cloth cover of good quality of cost not less than Rs. 250/- per metre on and including 12mm thick ply seat bottom complete. The bottom part of the seat should be covered with black colour nylon cloth as directed. Colour and pattern of tapestry cloth shall be as approved by GE. |
| 74 | Back made of 75mm thick foam with new tapestry cloth cover of good quality of cost not less than Rs. 250/- per metre including 12mm thick ply back support complete. The joint of tapestry cloth should be provided with rubber/ nylon beading as directed. Colour and pattern of tapestry cloth shall be as approved by GE. |
| 75 | Seat and back cover as per srl item no 13.01 & 13.02 above complete as directed. |
| 76 | Arms as per existing. |
| 77 | M&L for painting to frame with one coat of black synthetic enamel paint including preparation of surface complete all as specified. |
| 78 | Rubber/ PVC shoes as directed. |
| 79 | S&F in replacement rubber shoes of size 25mm x 25mm to the legs of various types of tables after removing the existing old one. |
| 80 | S&F in replacement top made of 18/19mm thick exterior grade MDF board both side prelaminated and provided with 4mm thick TW beading alround fixed with nails and fevicol for various types of table complete all as specified and directed. |
| 81 | CHAIR VARANDAH PVC SEAT (FD/ MAP-II/06) |
| 82 | M&L for removal of old paint and painting the same with two coats of white synthetic enamel paint over a coat of primer including and preparing the surface complete all as specified and directed. |
| 83 | M&L for gas welding to frame including removal of old paint and preparing the surface and removing the unwanted welding spot complete all as specified and directed. |
| 84 | S&F in replacement seat and back complete all as specified and directed. |
| 85 | CHAIR SCHOOL WITH HAND BOARD (DRG NO FD/E6/MAP/05) |
| 86 | M&L for removal of old paint and painting of chair school with hand board with two coats of black synthetic enamel paint over a coat of primer including preparing the surface complete all as specified and directed. |
| 87 | S&F in replacement PVC seat of chair school with hand board all as shown in drawing. |
| 88 | S&F shoe for chair school with hand board all as specified and directed. |
| 89 | M&L for replacement of hand board made of 18mm thick both side prelaminated exterior grade MDF board grade-I conforming to IS: 14587 made to shape and fixed with TW beading alround with tightening screws complete all as specified and directed. |
| 90 | BED HARD STEEL MAP DRG (DRG NO FD/E6/MAP/08) |
| 91 | M&L for complete removal of existing paint and applying two coats of black synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 92 | M&L for removing existing unserviceable ply of bed hard top and supply and fixing new ply of 12mm thick, BWR exterior grade, 7 ply complete all as specified and directed. |
| 93 | M&L for removing head board & foot board and supply and fixing with new one made of 18mm both side prelaminated particle board complete all as specified and directed. |
| 94 | Supply and fixing shoe for legs. |
| 95 | CHARPOY IP FOLDING WITH PLY TOP/ CHARPOY IP WITH PLY TOP (DRG NO FD-386 (R)/ (FD/MAP-II/01) |
| 96 | M&L for complete removal of existing paint and applying two coats of black synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 97 | M&L for removing existing unserviceable ply and fixing new ply of 12mm thick, BWR exterior grade, 7 ply complete all as specified and directed. |
| 98 | BOOK CASE STEEL (DRG NO FD-1028) |
| 99 | M&L for replacement of unserviceable glass with 6mm thick plain sheet glass (Size as per drg) complete all as specified and directed. |
| 100 | Fixing of loose shutters in existing position with appropriate size clips and sliding roller as existing and making the sliding shutter for easy moving. |
| 101 | CHARPOY GI PIPE WITH PLYTOP (DRG NO FD-220) |
| 102 | Removing of old/ broken threaded long rail from charpoy GI and supply & fix new long rail made of GI tubing 32mm bore medium grade with both ends threaded complete all as specified & shown in the drg and as directed by Engineer-in-Charge. |
| 103 | Removal of old/ broken threaded short rail and fixing short rail made from old long rail obtained from item No. 21.01 above duly threaded both ends complete all as specified & shown in the drg and as directed by Engineer-in-Charge. |
| 104 | Removal of old/ broken threaded leg from charpoy GI and fixing leg fabricated out of broken short rail obtained from item No. 21.02 above by proper threading end fixing complete all as specified & shown in the drg and as directed by Engineer-in-Charge. |
| 105 | Removing of old/ broken galvanized iron elbow three ways 32 mm bore from GI charpoy with nylon newar, supply and fixing new GI elbow of 32mm bore 3 ways (weight of elbow not less than 450 gms) in position and also tightening of all component (complete charpoy) complete all as specified & shown in the drg and as directed by Engineer-in-Charge. |
| 106 | Removal of old broken GI check nut of 32mm dia and supply and fixing of new GI check nut of same size in position complete all as specified & shown in the drg and as directed by Engineer-in-Charge. |
| 107 | Removing of old/ broken stiffener from GI charpoy, Supply & fixing new stiffener made of 32mm x 5mm flat iron duly painted with two coats of black synthetic enamel paint over a coat of red oxide primer and welded to frame complete (with proper welding process) and complete all as specified & shown in the drg and as directed by Engineer-in-Charge. |
| 108 | S&F in replacement 12mm thick 7 ply of BWR exterior grade of size 1980mm x 900mm (approximate) to frame with flat head MS nut and bolt (Total 13 Nos per charpoy) after drilling hole in ply and frame of charpoy, moulding the corners of ply top to curve and painting the entire frame of charpoy with two coats of aluminum paint (1st grade) over a coat of redoxide metal primer and also tightening of all components (complete Charpoy) complete all as specified in the drg and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
