|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 2 | Dismantling fencing wire mesh any type complete all as specified and as directed. |
| 3 | Dismantling posts or strusts (steel) any section, embedded in concrete, brickwork masnory etc., including taking out embedded portion and making good the disturbed ground complete all as specified and as directed. |
| 4 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixing with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft/disintegrated rock.complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness below or above ground level complete all as specified and as directed. |
| 6 | M&L 50mm thick Plain cement concrete type B1 1:2:4 (20 mm graded aggregate) as in copings complete all as specified and as directed. |
| 7 | M&L Plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in foundations and mass concrete complete all as specified and directed. |
| 8 | S&F Hand rails, half round or other stock section or core for wooden hand-rail, straight portion, drilled & countershunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts.posts & struts in fencing including ctting tops to shape as directed, drilling holes, notching for wire mesh wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Grade E-165 complete all as specified and directed. |
| 9 | supplying of MS galvanised Chain link fencing any size including line wires, all as specified and as directed. |
| 10 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. complete all as specified and directed. |
| 11 | S&F mild steel round bars of any dia and over cut to length, bent to shape required, including cranking, bending etc (Fe-410-W Gde E-250 quqlity-A ) complete all as specified and directed. |
| 12 | M&L mild steel in flat iron or square bars in available length supporting steel angle (Fe-410-W (gde. E-250) quality-A all as specified and as directed. |
| 13 | S&F Mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment . Fe 410-W (Grade-E- 250) quality-A complete all as specified and directed. |
| 14 | Supply and fix in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any tupe of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, all as specified and as directed. |
| 15 | M&L Prepearing new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of Red oxide, zinc chrome primer complete all as specified and directed. |
| 16 | Demolition of brickwork or stone/ boulder masonry, dressed stone work and precast concrete articles built in cement mortar complete all as specified and as directed. |
| 17 | M&L precast cement concrete block masonry with solid blocks of PCC Type C1 1:3:6 20mm graded aggregates exc 10cm in width and setting in CM 1:6 complete all as specified and as directed. |
| 18 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 19 | M&L rendering 15mm thick in cement plaster in cm 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement.complete all as specified and as directed. |
| 20 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified and directed. |
| 21 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed. |
| 22 | S & F for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels,plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 23 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.complete all as specified and as directed. |
| 24 | M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 25 | Providing and fixing Concertina coil fencing with punched tape barbed Razor concertina coil 600mm dia 10 metre operable length (total 90m) having 50 Nos rounds per 6 metre length, with existing angle iron 'Y' shaped placed 2.4m or 3.0m apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied with GI stapels and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Eng-in-chrg with reinforced barbed tape (R.B.T)/ spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq mm with tape (0.52mm thick ) and weight 43.478 gm/metre (cost of MS angle CC blocks shall be paid seperately.) Please Enable Macros to View BoQ information |
