Tender For Special Repairs To Bldg No P-13 At Defence Colony Mankhurd Mumbai Under Cwe (Subs) Mumbai
Tender Value
89.53 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
21 days left
EMD
1.59 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No P-13 At Defence Colony Mankhurd Mumbai Under Cwe (Subs) Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down aluminium/ wooden chowkats or frames with shutters (without taking off shutters from the frame)incl grill not exceeding 1.5 sqm each. and stacking for issued under Sch of Credit. |
| 2 | All as per item No 1 above but exc 1.5 Sqm but n.exc 4 Sqm each |
| 3 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified & directed |
| 4 | RE-fixing shutters of any description exc 1sqm and n exc 2sqm complete all as specified and directed by EIC. |
| 5 | M & L for udaipur green marble 15-20mm thick laid over 15mm thick cement rendering in CM 1:4 as in cills,jambs of window , cooking platform laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing including dismantling of old cuddapah and removal of debris outside MD land upto requisite distance complete all as specified and directed by the Engineer-in-charge |
| 6 | S & F anodised aluminium section for sliding / openable window / doors of reqd size medium weight section, plain glass on and aluminium wire cloth shutters with two nylon roller on each shutters including star lock handle, soft rubber gasket or aluminium glazing beading fixed with nickel plated screws complete all as specified and directed by Engineer-in-chargeNote (i): Make of AL section shall be Jindalco/Hindalco/Indalco.Glass & wire cloth required shall be measured and paid separately. Note (ii) : The Al section shall be medium weight, section as decided by the Engineer-in-Charge. |
| 7 | S&F for aluminium grill DG-104 having weight not less than 2.507 kg/sqm, 10mm thick fixed on aluminium frame of 'F' section of size 23.4x15.3x1.4mm thick fixed to aluminium window/ ventilator complete all as specified and direected by EIC. |
| 8 | Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm & fixed with aluminium wire staples. |
| 9 | Supply only 4-5 mm thick glass ordinary quality in each pane for aluminimum sliding window complete all as specified & directed by Engineer-in-Charge. |
| 10 | Supply only 5 mm thick figured glass pin head in each pane for aluminimum sliding window area n exc 0.5sqm in each pane complete all as specified & directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 11 | Supply only 5 mm thick figured glass pin head in each pane for aluminimum sliding window area n exc 0.5sqm in each pane complete all as specified & directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender