Tender For Special Repairs To Bldg No T-126 & T- 127 And T-78 At Mil Stn Dhrangadhra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
9 days left
EMD
57800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No T-126 & T- 127 And T-78 At Mil Stn Dhrangadhra
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement (Corrugated semicorrugated ,etc) sheets in roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed. |
| 3 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 4 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 5 | M&L Rendering 15 mm thick in two layers consisting of first layer 5mm in CM 1:6 and top layer 10mm thick in CM (1:4) plastering on stone masonry surface and rendering is to be finished even and smooth w/o using extra cement complete all as specified and directed. |
| 6 | M&L for 15 mm thick cement plaster on fair faces of stone masonry surface on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed. |
| 7 | Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed. |
| 8 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 9 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 10 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 11 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed. |
| 12 | S&F standard aluminium section powder coated any colour as approved for door frames / shutters, window, ventilator frames/three track shutters sliding/fixed /louvered and partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and fixed in position with stainless steel screws all as specified and as directed. |
| 13 | Supply and Fixing sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 14 | Supply and Fixing sheet glass 5.5 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 15 | M&L for machine cut kota stone slab, 550mmx550mm, 20-25mm thick as in flooring laid over and including cement mortar screed bed of 20mm thick in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified complete all as specified and directed. |
| 17 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed |
| 18 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410, Gde E-250A all as specified and directed. |
| 19 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (except material) (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410, Gde E-250A all as specified and directed. |
| 20 | M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 21 | M&L for preparation of old painted Steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint complete all as specified and directed. |
| 22 | S&F in repairs for Steel rolling shutters of 1.00mm thick laths, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 23 | Demolition of cement concret of any description and in any position not otherwise specifically provided forcomplete all as specified and directed. |
| 24 | M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in flooring complete all as specified and as directed |
| 25 | Supply only polyester triangular fibres as secondary reinforcement in all types of concrete and mortars complete all as specified and directed. |
| 26 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and as directed. |
| 27 | S & F for 6 mm thick of size 605x605 mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed anodised aluminium snap grid/section size 605mmx605mm with main runner ,cross tee and wall angle duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified. Make : Armstrong or equivalent as approved by GE. |
| 28 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking latforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 29 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 30 | S&F, factory made, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed. |
| 31 | S&F Stainless steel Door hinges medium weight, cold rolled 100 mm size all as specified and directed. |
| 32 | S&F Aluminium anodised barrel tower bolt of extruded section length of bolt in 150 mm size complete all as specified and directed. |
| 33 | S&F Aluminium anodised barrel tower bolt of extruded section length of bolt in 125 mm size complete all as specified and directed. |
| 34 | S&F Aluminium anodised barrel tower bolt of extruded section length of bolt in 200 mm size complete all as specified and directed. |
| 35 | S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed . |
| 36 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed. |
| 37 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 38 | Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring complete all as specified and as directed. |
| 39 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shed, polished, area of each tiles not exceeding 0.36 sqm in floors over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 40 | Dismantling timber scantling 40 sqcm and over in section ,an any position (framed) complete all as specified and as directed. |
| 41 | Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 42 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 43 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 44 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 45 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in plinth protection finisheed even and smooth without using extra cement complete all as specified and as directed. |
| 46 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set ,jointed and with mixture or white & grey cement in equal proportion & no pigment ,pointed in neat cement slurry in floors over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed. |
| 47 | Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 48 | M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing RCC work in any position complete all as specified and as directed. |
| 49 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 50 | M&L for TMT bar 10 mm dia and over including cutting bending and binding with MS wire anealed dia not less than 0.9 mm complete all as specified and as directed. |
| 51 | M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed.Note :- (New reinforcement or Welded wire fabric) will be measured and paid separately). |
| 52 | Taking down carefully aluminum/copper point wiring (light, fan, socket or power) complete along with fittings such as switches, ceiling roses, bell, regulators sockets etc, and removing from site and making good distribut surfaces of walls, floors etc complete all as specified and as directed. |
| 53 | Taking down existing unserviceable MCB DB/TPN/SPN/SP along with MCBs complete by disconnecting complete all as specified and as directed. |
| 54 | Taking down existing unserviceable T/light fitting & box type fitting complete all as specified and directed. |
| 55 | Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 56 | Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender