Tender For Upgradation Of Guest House At Budhal (2Nd Call)
Tender Value
1.23 Crore
Estimated cost
Bid Submission
06 Jul 2026
4 days left
EMD
2.46 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Guest House At Budhal (2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: in all kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) Crushed . |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand: 10 brick aggregate 40mm nominal size) Brick aggregate . |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed. Using 20% boulder. |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of Centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)Crushed Aggregate |
| 6 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level,Crushed Aggregate |
| 7 | Reinforcement for RCC work including straightening cutting, bending, placing in position & binding all complete with TMT bars. |
| 8 | Centring and shuttering including strutting, propping etc. and removal of form for· |
| 9 | Foundations: footings, bases of columns etc. for mass concrete. |
| 10 | Suspended floors, roofs, landings, balconies and access platform. |
| 11 | Lintels, beams, plinth beams, girders,bressumers and centilevers. |
| 12 | Edges of slabs and breaks in floors and walls. Under 20 cm wide |
| 13 | Walls any thickness including attached pilasters, buttresses plinth and |
| 14 | Weather shade. Chajjas, corbels etc., including edges. |
| 15 | Stairs, (excluding landings) except spiralstaircases. |
| 16 | Columns, pillars, piers, abutments, posts and struts. |
| 17 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar. |
| 18 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 19 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) & Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) |
| 20 | Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood |
| 22 | 6 mm Cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) |
| 23 | 12mm cement plaster of mix 1:6 (1 cement : 6 fine sand) |
| 24 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 25 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm |
| 27 | Providing and fixing 1st quality ceramic glazed floor tiles conformingtoIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade,Area of slab over 0.5 sqm) (16mm) |
| 30 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm diafully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 31.20.1 With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. |
| 31 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (welded) |
| 32 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick with zinc coating not less than 350 gram/m2 |
| 33 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2. Length= 250.00rft = 76.21 rm |
| 34 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood |
| 35 | Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : |
| 36 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed |
| 37 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 38 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick second class Kail wood |
| 39 | Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size. 30 mm thick Second class kail wood. |
| 40 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 41 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete fixed to steel windows by welding. |
| 42 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(2mm thick) |
| 43 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 44 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (two coats) |
| 45 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 46 | Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. (two or more coat on new work |
| 48 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 49 | Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm |
| 50 | Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.150x10 mm |
| 51 | Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete 200x10mm |
| 52 | Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc.complete:200 mm |
| 53 | Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc.complete:125 mm |
| 54 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete |
| 55 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 56 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : Flat pressed 3 layer particle board or graded wood particle board IS:3087 (18mm) |
| 57 | Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality |
| 58 | Carriage Consumptions |
| 59 | Carriage of Sand lead up to 175 kms avg. by mechanical transport including loading / unloading and stacking complete. |
| 60 | Carriage of Aggregate 40 mm lead up to 20 kms avg. by mechanical transport including loading / unloading and stacking complete. |
| 61 | Carriage of aggregate 20mm lead up to 20 kms avg. by mechanical transport including loading / unloading and stacking complete. |
| 62 | Carriage of Bricks lead up to 185 kms avg. by mechanical transport including loading / unloading and stacking complete. |
| 63 | Disposal of excavated material with in 2km by M.T. Qty. vide item no. 1 =178.88 cum |
| 64 | Plumbing/Sanitary |
| 65 | Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid of make Hindware/Cera/Jaquar or as approved by site incharge |
| 66 | Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flushpipe (of approved make) \\"manually contro(led device(handle lever) conforming to IS:7231, with all fittings andfixtures complete, including cutting and making goodthe walls and floors wherever required Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. |
| 67 | Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. centre hole mixture, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 630x450 mm with a pair of 15mm C.P brass Pillar taps. |
| 68 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 69 | Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink including waste coupling as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm |
| 70 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 32 mm dia |
| 71 | Providing and fixing 100 mm CP grating for gully, floor or Nahani trap. |
| 72 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 453x357 mm |
| 73 | Providing and fixing Toilet paper holder C.P brass |
| 74 | Providing and fixing PVC pipes with necessary stays / clamps with fasteners of following dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 75 | 160 mm dia |
| 76 | 110 mm dia |
| 77 | 75 mm dia |
| 78 | Providing and fixing PVC door bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: |
| 79 | 160 mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 80 | 100 mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 81 | 75 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 82 | Providing and fixing PVC plain bend of required degree: |
| 83 | 160 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 84 | 100 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 85 | 75 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 86 | Providing and fixing PVC door Tee with PVC acess door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 87 | 100x100x100mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 88 | 75x75x75mm dia working pressure 4kg/cm2 |
| 89 | Providing and fixing PVC reducer tee with PVC acess door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 90 | 100x100x75mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 91 | Providing and fixing PVC Plain reducer tee insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 92 | 100x100x75mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 93 | Providing and fixing PVC offsets working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 94 | 75 mm PVC off sets |
| 95 | 110 mm PVC off sets |
| 96 | 160 mm PVC off sets |
| 97 | Providing and fixing PVC collar: |
| 98 | 110mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 99 | 75mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 100 | 160mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent |
| 101 | Providing and fixing PVC P/S/F trap of different dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent complete, including cost of cutting and making good the walls and floors: |
| 102 | Cutting chases in brick masonry walls for following diameter PVC pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) 1:4 ( 1 cement: 4 coarse sand) |
| 103 | 100mm dia. |
| 104 | 75mm dia. |
| 105 | Providing & fixing PVC Cowl of make Supreme, finolex or equivalent |
| 106 | Providing and fixing Soap dish (c.p brass) with bracket |
| 107 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 18.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 108 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. (Internal work) of make Jindal/Surya Prakash of medium class or as approved by site incharge |
| 109 | 15 mm dia. nominal bore (medium) |
| 110 | 20 mm dia. nominal bore (medium) |
| 111 | 25 mm dia. nominal bore (medium) |
| 112 | 32 mm dia. nominal bore (medium) |
| 113 | Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) of make Jindal/Surya Prakash of medium class or as approved by site incharge |
| 114 | 25 mm dia. nominal bore |
| 115 | Providing & fixing Brass ball valve of approved quality conforming to IS : 8931 of 15mm nominal bore of make DRP or as approved by site incharge |
| 116 | Providing & fixing Brass ball valve of approved quality conforming to IS : 8931 of 25mm nominal bore of make DRP or as approved by site incharge |
| 117 | Providing & fixing Brass ball valve of approved quality conforming to IS : 8931 of 20mm nominal bore of make DRP or as approved by site incharge |
| 118 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore of make hindware/cera/jaquar or as approved by site incharge |
| 119 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore of make hindware/cera/jaquar or as approved by site incharge |
| 120 | Providing and fixing C.P. Jet with connection pipe |
| 121 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore of make hindware/cera/jaquar or as approved by site incharge |
| 122 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore |
| 123 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design |
| 124 | Inside size 90x80 cm and 45 cm deep including C.l. cover with frame (light duty) 455x610 mm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate |
| 125 | Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 126 | 15 mm nominal bore |
| 127 | 20 mm nominal bore |
| 128 | 25 mm nominal bore |
| 129 | 32 mm nominal bore |
| 130 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 131 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 132 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G. I. pipe etc. |
| 133 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 134 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. |
| 135 | Cutting holes up to 30x30 em in walls including making good the same With common burnt clay F.P.S. (non modular) bricks |
| 136 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround pvc pipes including bed concrete as per standard design |
| 137 | 100 mm diameter S.W. pipe (a) Crushed |
| 138 | 150 mm diameter S.W. pipe (a) Crushed |
| 139 | Providing and installation and testing of Geysor of approved quality and manufacture all complete |
| 140 | 35 litre capacity |
| 141 | 50 litre capacity |
| 142 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 143 | Providing & Installation of 2HP three phase pump of make Crompton with electrical connection complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 days