Tender For Primary School Chowtal Sonbanjar.(Acr) Sno.1681
Tender Value
20.30 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
40600
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Primary School Chowtal Sonbanjar.(Acr) Sno.1681
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | Corrigendum | Other | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed. |
| 2 | P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, with all leads and lifts complete |
| 4 | P/L in position cement concrete of specified grade excl. the cost of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size). |
| 5 | Reinforced cement concrete work upto plinth level excluding cost of centering, shuttering, finishing and reinforcement with (M-15Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.) |
| 6 | Providing/laying in position specified grade excluding the cost of centering & shuttering . 1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size- crushed.) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelnes, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor V level excluding cost of centering, shuttering, finishing and reinforcement with (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.) Incl all carraiges of material involved. |
| 8 | Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns etc for mass concrete. |
| 9 | Reinforcement for R.C.C work including straightening cutting, bending placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more..Including carriage of all materials involved with loading unloading and stacking complete. |
| 10 | Brick work with FPS bricks of class designation 75 in foundation and plinth in cement mortar in 1:6 mix incl carraige of bricks upto site of work complete including extra upto floor V level. |
| 11 | Centring and shuttering including strutting proping and removal of form work for suspended floors, roofs, landings, balconies and acces. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Providing and fixing wood work in frames of doors windows clestory windows wrought frame and fixed in position of Imported Wood |
| 14 | Structural steel welded in built up sections, trusses and frame work, including soffits, eaves board etc including cutting, hoisting, fixing in position incl. applying a priming coat of approved steel primer all complete. |
| 15 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 16 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 17 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs |
| 18 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry, but excluding the cost of noising of steps etc. complete. 50mm thick 20 mm nominal size stone aggregate Including carriage of all materials involved with loading unloading and stacking complete. |
| 19 | Providing and fixing strips in joints of terrazzo/ cement concrete floorsGlass strips 40 mm wide and 6 mm thick |
| 20 | 12mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand) (Interior as well as Exterior) |
| 21 | Providing and applying 2mm thick wall putty on walls to make surface even and smooth . |
| 22 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 23 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 24 | Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade incl priming coat of wooden primer.( Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer ) |
| 26 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and celerestory windows including ISI mark black enamelled butt hinges with necessary screws incl panelling of door shutters and glazing of windows 35mm Imported Wood |
| 27 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS:12823, Grade-I, Type-II marked : |
| 28 | Providing and fixing of glass panes 3.5 mm including cost of beading and nails all complete job |
| 29 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 35mm Kiln seasoned and chemically treated hollock wood |
| 30 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 31 | Providing and fixing of hardware items of good quality including cost of screws all complete job |
| 32 | Handles 6\\" |
| 33 | Handles 4\\" |
| 34 | tbolt 4\\" |
| 35 | T bolt 6\\" |
| 36 | L drop |
| 37 | Providing and fixing of conduit pipes 20 mm dia of approved brand and manufacture complete job |
| 38 | P/F Light concealed junction box of approved make |
| 39 | P/F of Fan junction box of approved make |
| 40 | Carriage of materails By Mech.Transport, from source to site of work |
| 41 | Stone agg. for an avg lead of 13 km |
| 42 | sand for an avg lead of 13 km |
| 43 | Bricks for an avg lead of 10 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender