Housing Urban and Rular Development Boards / Undertakings / PSU Closing in 5 days TDR #56198614

Tender For Construction Of Boundary Wall At Stp Complex Bhagwati Nagar Jammu.

Issued by Boards / Undertakings / PSU · Jammu, Jammu and Kashmir
Tender Value
1.51 Crore
Estimated cost
Bid Submission
18 Jul 2026
5 days left
EMD
3.02 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Boundary Wall At Stp Complex Bhagwati Nagar Jammu.

BOQ

Name of Work:- Construction of Boundary wall at STP Complex Bhagwati Nagar Jammu.
Sl. No. Item Description
1Dismantling RCC work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material
2Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix
3Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
4Earth work in excavation by mechanical means in foundation (all kinds of soil)
5Providing & laying cement concrete of specified graded complete up to plinth level including curing but excluding cost of centering & shuttering, finishing and carriage etc. in 1:4:8 (1 cement 4 coarse sand 8 graded stone aggregate of 20 mm nominal size)
6Providing & laying cement concrete of specified graded complete up to plinth level including curing but excluding cost of centering & shuttering, finishing and carriage etc. in 1:3:6 (1 cement 3 coarse sand 6 graded stone aggregate of 20mm nominal size)
7Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
8Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
9Reinforcement for RCC work including straightening, cutting, bending placing in position & binding all complete including cost of binding wire upto plinth level hot rolled deformed bars .TMT bars of grade Fe-500D or more
10Carriage disposal of surplus material from side by MT for on average lead of 10 km in all terrains including loading & unloading complete
11Centering and Shuttering including strutting propping etc. and removal of form for foundations, footing bases of column etc. for mass concrete
12Mud mat
13Rcc beams
14Column footings
15Column
16Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
17Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1812mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
19Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
20Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
21Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge,
22Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
23Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
24Painting with aluminum paint of approved brand and manufacture to give an even shade. Two or more coats on new work
25Carriages of bricks from an avg. distance of 15 km by MT and 100 MT by HL
26Carriages of sand and bajri from an avg. distance of 10 km by MT
27Deduct for recovery of dismantlled steel Qty vide item no 1 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56198614
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.51 Crore
LAST DATE 18-07-2026
Authority
Authority Name Housing And Urban Development Corporation Limited
Work Description Tender for Construction Of Boundary Wall At Stp Complex Bhagwati Nagar Jammu.
Basic Detail
Tender No E-NIT No 26 of 2026-27 Dated 27-06-2026
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 27 Jun 2026
Submission Date 18 Jul 2026
Open Date 20 Jul 2026
Finance
Tender Value 1.51 Crore
Tender Fee 5000
EMD 3.02 Lakhs
Exemption Not Available
Document List
9ca533a6-de5b-42c3-904c-59e47edeabe4.html
BOQ_1015817.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Jul 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

9ca533a6-de5b-42c3-904c-59e47edeabe4.html

xls

BOQ_1015817.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders