Tender for Construction of two Roomed acr at Tumina Bala 101031703
Tender Value
30.08 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
1 days left
EMD
60180
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of two Roomed acr at Tumina Bala 101031703
BOQ
| Sl. No. | Item Description |
| 1 | Clearance of Site incl platform cutting if any , removing of Debris, Vegetation , bushes and cutting of trees and disposal of rubbish complete job |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres in All kinds of soil : |
| 3 | Providing & Laying of stone soling (duly hand packed) including watering dressing and ramming to achieve desired compaction incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 4 | Providing & laying in position cement concrete of specified grade including curing but excld. the cost of centring and shuttering all work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 6 | Providing & laying in position cement concrete of specified grade including curing but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 7 | Reinforced cement concrete work in Columns, beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 8 | Centring and shuttering of kit ply including propping, strutting & removal of the same in Foundations, footings, bases of columns etc. for mass concrete complete job |
| 9 | Centring and shuttering of kit ply including propping, strutting & removal of the same in Suspended floors, slabs etc complete job |
| 10 | Centring and shuttering of kit ply including propping, strutting & removal of the same in Lintel, beams, plinth beams, girders, bressumers and cantilevers complete job |
| 11 | Supply and Filling of RBM/Nallah Muck for back filling in rooms and foundations including ramming, dressing, consolidation to achieve required MDD complete job incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 13 | Aluminium Framework Fixed Portion. Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 14 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) with Powder coated aluminum (minimum thickness of powdercoated 50 microns) |
| 15 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on bothsides. |
| 16 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 17 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.With Aluminium beading of required size complete as per the directions of EIC |
| 18 | 12 mm thick cement plaster in 1:4 mix (1 Cement : 4 Fine Sand) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 19 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 20 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 21 | Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 22 | Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth incl all costs and carriages of all the materials involved upto site of work complete |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 24 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 26 | Structural steel work welded in built up sections, hollow sections etc incl. cutting,hoisting and fixing in position and applying a priming coat of approved steel primer and two or more coats of synthetic enamel paint incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 27 | P/F track deck crill make or equivalent Hi rib profiled sheets of 0.5mm thickness of approved make, pattern and colour fixed to the supporting structure by J/L hooks including ridges/hips/ valleys of high tensile SMP steel of required width as directed with all necessities complete incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 28 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 29 | 75x63x3.2 mm |
| 30 | 125x63x4 mm |
| 31 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 32 | 125 mm |
| 33 | 200 mm |
| 34 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 35 | 100x10 mm |
| 36 | 200 mm |
| 37 | Providing and fixing of MS Rod Locks with in-built siding bolt including nuts, grills etc. Doors |
| 38 | Providing and fixing hooks and stoppers incl. all necessary accessories complete job. Windows |
| 39 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 40 | Providing and fixing of PVC conduits 25mm dia (Finolex or equivalent brand) |
| 41 | Providing and fixing of Light Junction Blocks complete as directed by Engneer in- charge |
| 42 | Providing and fixing of Fand Junction block complete as directed by Engneer in- charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender