|
| 1 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.SOR 2.1.1 |
| 2 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Mord 300(11.1) |
| 3 | Plain/reinforced cement concrete (1:4:8) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 SOR 4.1.8 |
| 4 | Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 |
| 5 | Providing and laying reinforced cement concrete in open foundations complete as per drawing and technical specifications Clauses M15/M20 Design mix (4.1.2)SOR |
| 6 | Plastering with cement mortar (1:4) cement and fine sand 12mm thick on brickwork with neat coat of cement in substructure as per technical specification Clauses 613.4 & 1204 SOR 13.7.2 |
| 7 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401 |
| 8 | Providing , laying , spreding and compacting graded stone aggregate to water bound macadam specification including Spreading in uniform layers , hand packing,rolling with three wheel steel/vibratory roller in stages to proper grade and camber,applying and brooming requisite type of screening/ binding material to fill up the interstices of course aggregate , watering and compacting to the required density. (Water Bound Macadam Grade-3)as per MoRTH specification clause No. 4.14 complete in all respects. |
| 9 | Providing and applying prime coat with bitumien emulsion SS1 on prepared surface of granular Base inlcuding clearing of road surface and spraying primer at the rate of 0.85kg/sqm using mechinical means .as per MoRTH specification clause No. 502 complete in all respects. |
| 10 | Providing and applying tack second coat with RS-1 using emulsion pressure distributor at the rate of 0.20- 0.30 kg per sqm in the norms bituminous surface cleaned with mechanical broom . as per MoRTH specification clause No. 503 complete in all respects. |
| 11 | Providing and laying bituminous concrete with 120 TPH batch type hot mix plant producing an avarage output of 75 tonne per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler , transporting the hot mix to work site , laying with hydostatic paver finisher with sensor control to the required grade , level and aligmnment , rolling with smooth wheeled , vibratory and tendom roller to achieve the desired density as per Job mix MoRT&H Specification Clause 507 complete in all respects. |
| 12 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (M20 Job mix) 5.1.2 |
| 13 | Centering and shuttering including strutting, propping etc and removal of form for Foundations footings, bases of cloumns, etc for mass concrete as Si NO. 5.9.5 |
| 14 | Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 |
| 15 | Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504 (Exclusive GSB) as per MORD 1500 (6.7 |
| 16 | Painting Lines dashes arrow extra on the road hot applied thermoplastic compoud 2.5 mm thick i/c reflective glasses beads @ 250 gm/ sqm area i/c TSC- 1702 Please Enable Macros to View BoQ information |
