|
| 1 | Replacement of a 40 50 mm size square bar rail on the cane unloader and giving a satisfactory trial. | Mill House Fabrication Works |
| 2 | Alignment of rail bars of the bridge of the cane unloader and replacement as per requirement and satisfactory trial. | Mill House Fabrication Works |
| 3 | All the worn and damaged plates and angles fitted on the cane carrier should be cut and removed and the given 6 8 mm MS plate should be bent and fitted | Mill House Fabrication Works |
| 4 | Replacement of worn corroded runners of the cane carrier SRC and IRC with 8 x 65 mm or 10 x 65 mm flat iron and repair replacement of weak guidelines and a satisfactory trial | Mill House Fabrication Works |
| 5 | To fabricate and errect the cane carrier guide as per the given sample and give a satisfactory trial. | Mill House Fabrication Works |
| 6 | Replacing the worn outside plate of the chopper and leveler with new 6 8 mm plate and giving a satisfactory trial. | Mill House Fabrication Works |
| 7 | Replacing the worn out hood top plate of the chopper and leveler with new 8 10 mm plate and giving a satisfactory trial. | Mill House Fabrication Works |
| 8 | Replacing the worn out side plate of the fibrizer with new 10 12 mm plate and give satisfactory trial. | Mill House Fabrication Works |
| 9 | To replace the reflector plate of the fibrizer and give a satisfactory trial. | Mill House Fabrication Works |
| 10 | Cutting and removing the weak and damaged side plate of SRC and IRC and replacing it with the given new 08 10 mm plate and giving a leakproof satisfactory trial. | Mill House Fabrication Works |
| 11 | Cutting and removing the weak and damaged bottom plate of SRC and IRC and replacing it with the given new 08 10 mm plate and giving a leakproof satisfactory trial. | Mill House Fabrication Works |
| 12 | To make and errect the guide of SRC and IRC as per the given sample and give a satisfactory trial. | Mill House Fabrication Works |
| 13 | To make runner boxes of SRC and IRC and give satisfactory trials. | Mill House Fabrication Works |
| 14 | To do the work of fitting the liner of the given SS plate at the bottom of SRC and IRC and give a satisfactory trial. | Mill House Fabrication Works |
| 15 | To fabricate boots using 8 10 mm MS plates provided by SRC and IRC and to conduct a satisfactory trial. | Mill House Fabrication Works |
| 16 | Carry out strengthening work using the channels and angles provided by SRC and IRC and conduct a satisfactory trial. | Mill House Fabrication Works |
| 17 | To fabricate the weak sloppy plates of the Donali suit fitted on Milo from the given MS plate as per the drawing and give a satisfactory trial. | Mill House Fabrication Works |
| 18 | Removing the worn out TRPF cover fitted on the mill and making and fitting a new cover using the plate given as per the drawing sample and giving a satisfactory trial. | Mill House Fabrication Works |
| 19 | To carry out the work of tipping the teeth of mill rollers and conduct a satisfactory trial. | Mill House Fabrication Works |
| 20 | To carry out the work of Chevron cutting as per requirement on mill rollers and give satisfactory trials. | Mill House Fabrication Works |
| 21 | Work involving the errectation of broken teeth on the mill s pressure chute repair of worn out teeth via hard facing and conducting a satisfactory trial run | Mill House Fabrication Works |
| 22 | dismantling the old pressure chute errected on the mill completely replacing the corroded section repairing and welding the damaged parts of the SS plate reassembling the unit fitting it onto the mill | Mill House Fabrication Works |
| 23 | Fabricate the juice tank for the mill house using the provided 6 8 mm plate and conduct a satisfactory trial run | Mill House Fabrication Works |
| 24 | Removing the bottom of the supply juice tank errecting a 12 mm plate in its place and conducting a satisfactory trial. | Mill House Fabrication Works |
| 25 | Manufacturing the bed for the S.R.C. and I.R.C. motor gear and conducting a satisfactory trial. | Mill House Fabrication Works |
| 26 | Remove the worn out TRPF headstock side plate errect a 6mm plate in its place and conduct a satisfactory trial. | Mill House Fabrication Works |
| 27 | Fabricating teeth for the hydraulic grab replacing old or damaged teeth with new ones and conducting a satisfactory trial run. | Mill House Fabrication Works |
| 28 | a Dismantling old columns beam channels etc. b Manufacturing and installing new columns beam channels etc. | Mill House Fabrication Works |
| 29 | Removing the old corroded platform and replacing it with a new one. | Mill House Fabrication Works |
| 30 | Installing 16 inch 18 inch manholes with blinds | Mill House Fabrication Works |
| 31 | Constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to 20 HP. | Mill House Fabrication Works |
| 32 | Dismantling fabricating and erecting weak corroded pipe lines up to 12 Inch and providing satisfactory leak proof trials. | Mill House Fabrication Works |
| 33 | Dismantling fabricating and erecting weak corroded tees up to 12 Inch and providing satisfactory leak proof trials. | Mill House Fabrication Works |
| 34 | Dismantling fabricating and erecting weak corroded nipples up to 12 Inch and providing satisfactory leak proof trials. | Mill House Fabrication Works |
| 35 | Dismantling fabricating and erecting a weak throated cross member up to 12 Inch and providing satisfactory leak proof trials. | Mill House Fabrication Works |
| 36 | Dismantling fabricating and erecting a weak throated band up to 12 Inch and providing satisfactory leak proof trials. | Mill House Fabrication Works |
| 37 | Dismantling fabricating and erecting a weak throated flange up to 12 Inch and providing satisfactory leak proof trials. | Mill House Fabrication Works |
| 38 | Dismantling fabricating and erecting a weak sloping reducer up to 12 Inch and providing a satisfactory leak proof trial. | Mill House Fabrication Works |
