Rural Development Local Bodies Closing in 16 days TDR #56196345

Tender For Supply Of 1 100 Mm Channel Shoulder 2.5 M Long 2 100 Mm S.C.I. Trap With Vent Heel 3 15 Mm C.P.Brass Tap 4 15 Mm Ptmt Bib Cock 5 200 Mm Aluminium Aldrop 6 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Prof

Issued by Local Bodies · Palakkad, Kerala
Tender Value
50 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
16 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Supply Of 1 100 Mm Channel Shoulder 2.5 M Long 2 100 Mm S.C.I. Trap With Vent Heel 3 15 Mm C.P.Brass Tap 4 15 Mm Ptmt Bib Cock 5 200 Mm Aluminium Aldrop 6 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished (Matt Finished) 7 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extrudedprofile Non Decorative Finished (Matt Finished) 8 Acrylic Exterior Paint 9 Adjustable Span Eso+Si (2.35-3.40) 10 Adjustable Telescopic Prop 3 M (2.02-3.75M) 11 Aluminium T Or L Sections 12 Anodised Aluminium Butt Hinges 100X75X4 Mm 13 Anodised Aluminium Handles 125 Mm With Plate 175 X 32 Mm 14 Anodised Aluminium Tower Bolt (Barrel Type)300X10 Mm 15 Beam Clamp 300-380 Mm (450-1070 Mm) 16 Binding Wire 17 Black Colour Dark Shade Pigment 18 Black Japan 19 Bone Meal 20 Brass 100 Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles 21 Brass Bib-Cock-15 Mm Dia 22 Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58X1.90 Mm 23 Bright Finished Or Black Enameled Mild Steel Screws 20 Mm 24 Bright Finished Or Black Enameled Mild Steel Screws 40 Mm 25 C.I. Bracket For Wash Basin And Sinks 26 C.P. Brass Waste 32 Mm 27 Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. 28 Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black 29 Chromium Plated Brass Screws 20 Mm 30 Chromium Plated Brass Screws 25 Mm 31 Chromium Plated Brass Screws 30 Mm 32 Coarse Sand (Zone Iii) 33 Column Clamp 450X1070 Mm 34 Corner Angle 45X45X5 Mm 1.50 M Long 35 Corner Angle 45X45X5 Mm 2.50 Long 36 Cowdung 37 Deharadun White Lime 38 Double Clip (Bridge Clip) 39 Exterior Primer 40 Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile 41 Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Structud Profile 42 Fine Sand (Zone Iv) 43 Flats Exceeding 10 Mm In Thickness 44 Flats Up To 10 Mm In Thickness 45 Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) 46 Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13,50 Kg/ Sqm) 47 Flushing Cistern P.V.C. 10 Its Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) 48 Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) 49 Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessoriesand Flush Pipe) 50 Galvanized Steel L Or J Hooks 51 Galvanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia. Of Wire 0.63 Mm 52 Gi Chicken Mesh 53 Gi Pipe 40Mm Dia 54 Gi Pipe 50Mm Dia 55 Gi Trafford Profile Sheet 0.35Mm Thick 56 Grafted Mango Sapling 57 Green Net 75% Shade 58 Hard Board 6 Mm Thick 59 Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper 60 Hollock Ballies 125 Mm Diameter 61 Interlocking C.C. Paver Block (60 Mm Thick, M-30) 62 Interlocking C.C. Paver Block (80 Mm Thick, M-30) 63 Iron Hooks & Eyes 100 Mm 64 Laterate Stone Of Size 40X20X15Cm 65 M.S. Tube 40 Mm Dia 66 Manglore Tiles 20Mm Thick 67 Metal Primer (U.G.) 68 Mild Steel Hooks 69 Mild Steel Plates 70 Mild Steel Rivets 71 Mild Steel Round Bar 12 Mm Dia And Below 72 Mild Steel Round Bar Above 12 Mm Dia 73 Mild Steel Sheets For Tanks 74 Mild Steel Sheets With Bolts And Nuts To Rest On Pintels 75 Mild Steel Tubes Electric Resistant Or Induction Butt Welded 76 Mild Steel Tubes Hot Finished Welded Type 77 Multi Surface Paint 78 Neoprene / Epdm Rubber Gasket 79 Pair Anodised Aluminium Lever Handles For 100 Mm Mortice Latch And Lock 80 Plastic Emulsion Paint 81 Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet 82 Polyurethene Bags 83 Portland Cement 84 Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm 85 Powder Coating 50 Microns On Aluminium Sections 86 Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement 87 Prelaminated Particle Board With One Side Decorative And Other Side Balancing Lamination, Flat Pressed 3 Layer & Graded (Medium Density) Grade I, Type Ii Conforming To Is:12823 (Exterior Grade) 12 Mm Thick 88 Premium Acrylic Emulsion Of Interior Grade, Having Voc Content Less Than 50Gm/Litre 89 Prop 2 M (2-3.5M) 90 Pvc Bend 110 Mm Dia 91 Pvc Bend 63 Mm Dia 92 Pvc Bend 75Mm Dia 93 Pvc Door Elbow 110 Mm Dia 94 Pvc Door Elbow 63 Mm Dia 95 Pvc Elbow 110 Mm Dia 96 Pvc Elbow 63 Mm Dia 97 Pvc Elbow 75Mm Dia 98 Pvc End Cap 63 Mm Dia 99 Pvc Pipe 110 Mm Outer Dia 6Kgf/Cm2 100 Pvc Pipe 150 Mm Outer Dia 6Kgf/Cm2 101 Pvc Pipe 25 Mm Outer Dia. 10Kgf Cm2 102 Pvc Pipe 50 Mm Outer Dia.6Kgf/Cm2 103 Pvc Pipe 63 Mm Outer Dia . 6Kgf/Cm2 104 Pvc Pipe 63 Mm Outer Dia 4Kgf/Cm2 105 Pvc Pipe 75 Mm Outer Dia 6Kgf/Cm2 106 Pvc Reducer 63X50 Mm Dia 107 Pvc Socket/Coupling 110 Mm Dia 108 Pvc Socket/Coupling 75 Mm Dia 109 Pvc Tee 63X63X63 Mm Dia 110 Pvc Vent Cowl 75 Mm Dia 111 Quarry Waste 112 Rawl Plug 50 Mm (Designation 10 Nos) 113 Rectangular Shape 453X357 Mm Mirror With Plastic Moulded Frame 114 Red Oxide Zinc Chromate Primer 115 Second Class Kail Wood In Planks 116 Second Class Kail Wood In Scantling 117 Second Class Kali Wood In Planks 118 Second Class Kali Wood In Scantling 119 Single Clip 120 Solid Blocks Of Size 30X20X15Cm 121 Solid Blocks Of Size 30X20X20Cm 122 Solid Block 40X20X20 123 Special Primer (C.W) 124 Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm 125 Stainless Steel Kitchen Sink Without Drain Board 470X420 Mm Bowl Depth 178 Mm 126 Stone Aggregate : 10 Mm 127 Stone Aggregate : 40 Mm 128 Stone Aggregate :20 Mm 129 Stone Aggregate(Sing Size): 06 Mm Nominal Size 130 Stone Aggregate(Single Size): 40 Mm Nominal Size 131 Stone For Masonry Work 132 Structural Steel Such As Tees , Angles , Channels And R.S. Joists 133 Structural Steel Such As Tees, Angles, Channels And R.S. Joists 134 Sundries 135 Synthetic Enamel Paint In Black Or Chocolate Shade 136 Through And Bond Stone Size 24 X 24 X 39Cm 137 Twisted Steel /Deformed Bar 138 Twisted Steel/Deformed Bars 139 Vibrator (Needle Type 40 Mm) 140 Vitreous China Flat Back Wash Basin 550X400 Mm 141 Vitreous China Flat Back Wash Basin 630X450 Mm 142 Vitreous China Orrisa Type W.C. Pan Size 580 Mm 143 Vitrified Floor Tile 60X60 Cm 144 Wall Form Panel 1250X450Xmm 145 Wall Form Panel 1250X500Mm 146 Water Proofing Cement Paint 147 Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre 148 Welding By Electric Plant 149 Wire Nails Please Enable Macros To View Boq Information

BOQ

Name of Work:- Material supply
Sl. No. Item Description
1100 mm channel shoulder 2.5 m long
2100 mm S.C.I. trap with vent heel
315 mm C.P.brass tap
415 mm PTMT bib cock
5200 mm Aluminium aldrop
635 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
735 mm thick factory made solid panel PVC door shutter of single piece extrudedprofile non decorative finished (Matt finished)
8Acrylic exterior paint
9Adjustable span ESO+SI (2.35-3.40)
10Adjustable telescopic prop 3 m (2.02-3.75m)
11Aluminium T or L Sections
12Anodised Aluminium butt hinges 100x75x4 mm
13Anodised Aluminium handles 125 mm with plate 175 X 32 mm
14Anodised Aluminium tower bolt (barrel type)300x10 mm
15Beam clamp 300-380 mm (450-1070 mm)
16Binding wire
17Black colour dark shade pigment
18Black Japan
19Bone Meal
20Brass 100 mm mortice latch and lock with 6 levers without pair of handles
21Brass bib-cock-15 mm dia
22Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
23Bright finished or black enameled mild steel screws 20 mm
24Bright finished or black enameled mild steel screws 40 mm
25C.I. bracket for wash basin and sinks
26C.P. brass waste 32 mm
27Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
28Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
29Chromium plated Brass screws 20 mm
30Chromium plated Brass screws 25 mm
31Chromium plated Brass screws 30 mm
32Coarse Sand (zone III)
33Column clamp 450x1070 mm
34Corner angle 45x45x5 mm 1.50 m long
35Corner angle 45x45x5 mm 2.50 long
36Cowdung
37Deharadun white lime
38Double clip (bridge clip)
39Exterior primer
40Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile
41Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece structud profile
42Fine sand (zone IV)
43Flats exceeding 10 mm in thickness
44Flats up to 10 mm in thickness
45Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
46Float glass sheet of nominla thickness 5.5 mm (weight not less than 13,50 Kg/ sqm)
47Flushing Cistern P.V.C. 10 Its capacity (low level) (white) (with fittings, accessories and flush pipe)
48Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
49Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessoriesand flush pipe)
50Galvanized steel L or J hooks
51Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm
52GI chicken mesh
53GI pipe 40mm dia
54GI pipe 50mm dia
55GI trafford profile sheet 0.35mm thick
56Grafted Mango Sapling
57Green Net 75% shade
58Hard board 6 mm thick
59Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
60Hollock ballies 125 mm diameter
61Interlocking C.C. paver block (60 mm thick, M-30)
62Interlocking C.C. paver block (80 mm thick, M-30)
63Iron hooks & eyes 100 mm
64laterate stone of size 40x20x15cm
65M.S. Tube 40 mm dia
66Manglore tiles 20mm thick
67Metal Primer (U.G.)
68Mild steel hooks
69Mild steel plates
70Mild steel rivets
71Mild steel round bar 12 mm dia and below
72Mild Steel round bar above 12 mm dia
73Mild steel sheets for tanks
74Mild steel sheets with bolts and nuts to rest on pintels
75Mild steel tubes electric resistant or induction butt welded
76Mild steel tubes hot finished welded type
77Multi surface paint
78Neoprene / EPDM rubber gasket
79Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock
80Plastic emulsion paint
81Polyethylene water storage tank with cover and suitable locking arrangemnet
82Polyurethene bags
83Portland Cement
84Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm
85Powder coating 50 microns on aluminium sections
86Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement
87Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 12 mm thick
88Premium acrylic emulsion of interior grade, having VOC content less than 50gm/litre
89Prop 2 m (2-3.5m)
90PVC bend 110 mm dia
91PVC Bend 63 mm dia
92PVC Bend 75mm dia
93PVC door Elbow 110 mm dia
94PVC door Elbow 63 mm dia
95PVC Elbow 110 mm dia
96PVC Elbow 63 mm dia
97PVC Elbow 75mm dia
98PVC End cap 63 mm dia
99PVC pipe 110 mm outer dia 6kgf/cm2
100PVC pipe 150 mm outer dia 6kgf/cm2
101PVC pipe 25 mm outer dia. 10kgf cm2
102PVC pipe 50 mm outer dia.6kgf/cm2
103PVC pipe 63 mm outer dia . 6kgf/cm2
104PVC Pipe 63 mm outer dia 4kgf/cm2
105PVC pipe 75 mm outer dia 6kgf/cm2
106PVC Reducer 63x50 mm dia
107PVC Socket/coupling 110 mm dia
108PVC Socket/coupling 75 mm dia
109PVC Tee 63x63x63 mm dia
110PVC vent cowl 75 mm dia
111Quarry waste
112Rawl plug 50 mm (designation 10 nos)
113Rectangular shape 453x357 mm Mirror with Plastic moulded frame
114Red oxide zinc chromate primer
115Second class kail wood in planks
116Second class kail wood in scantling
117Second class kali wood in planks
118second class kali wood in scantling
119Single clip
120Solid blocks of size 30x20x15cm
121Solid blocks of size 30x20x20cm
122SOLID BLOCK 40x20x20
123Special primer (C.W)
124Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
125Stainless steel kitchen sink without drain board 470x420 mm bowl depth 178 mm
126Stone Aggregate : 10 mm
127Stone Aggregate : 40 mm
128Stone Aggregate :20 mm
129Stone Aggregate(sing size): 06 mm nominal size
130Stone Aggregate(single size): 40 mm nominal size
131Stone for masonry work
132Structural steel such as tees , angles , channels and R.S. Joists
133Structural steel such as tees, angles, channels and R.S. joists
134Sundries
135Synthetic enamel paint in black or chocolate shade
136Through and bond stone size 24 X 24 X 39cm
137Twisted steel /deformed bar
138Twisted steel/deformed bars
139Vibrator (Needle type 40 mm)
140Vitreous china flat back wash basin 550x400 mm
141Vitreous China flat back wash basin 630x450 mm
142Vitreous China orrisa type w.c. pan size 580 mm
143Vitrified floor tile 60x60 cm
144Wall form panel 1250x450xmm
145Wall form panel 1250x500mm
146Water proofing cement paint
147Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
148welding by electric plant
149wire nails Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56196345
AUTHORITY Local Bodies
TENDER VALUE 50 Lakhs
LAST DATE 18-07-2026
Authority
Authority Name Grama Panchayat
Work Description Tender For Supply Of 1 100 Mm Channel Shoulder 2.5 M Long 2 100 Mm S.C.I. Trap With Vent Heel 3 15 Mm C.P.Brass Tap 4 15 Mm Ptmt Bib Cock 5 200 Mm Aluminium Aldrop 6 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished (Matt Finished) 7 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extrudedprofile Non Decorative Finished (Matt Finished) 8 Acrylic Exterior Paint 9 Adjustable Span Eso+Si (2.35-3.40) 10 Adjustable Telescopic Prop 3 M (2.02-3.75M) 11 Aluminium T Or L Sections 12 Anodised Aluminium Butt Hinges 100X75X4 Mm 13 Anodised Aluminium Handles 125 Mm With Plate 175 X 32 Mm 14 Anodised Aluminium Tower Bolt (Barrel Type)300X10 Mm 15 Beam Clamp 300-380 Mm (450-1070 Mm) 16 Binding Wire 17 Black Colour Dark Shade Pigment 18 Black Japan 19 Bone Meal 20 Brass 100 Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles 21 Brass Bib-Cock-15 Mm Dia 22 Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58X1.90 Mm 23 Bright Finished Or Black Enameled Mild Steel Screws 20 Mm 24 Bright Finished Or Black Enameled Mild Steel Screws 40 Mm 25 C.I. Bracket For Wash Basin And Sinks 26 C.P. Brass Waste 32 Mm 27 Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. 28 Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black 29 Chromium Plated Brass Screws 20 Mm 30 Chromium Plated Brass Screws 25 Mm 31 Chromium Plated Brass Screws 30 Mm 32 Coarse Sand (Zone Iii) 33 Column Clamp 450X1070 Mm 34 Corner Angle 45X45X5 Mm 1.50 M Long 35 Corner Angle 45X45X5 Mm 2.50 Long 36 Cowdung 37 Deharadun White Lime 38 Double Clip (Bridge Clip) 39 Exterior Primer 40 Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile 41 Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Structud Profile 42 Fine Sand (Zone Iv) 43 Flats Exceeding 10 Mm In Thickness 44 Flats Up To 10 Mm In Thickness 45 Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) 46 Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13,50 Kg/ Sqm) 47 Flushing Cistern P.V.C. 10 Its Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) 48 Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) 49 Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessoriesand Flush Pipe) 50 Galvanized Steel L Or J Hooks 51 Galvanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia. Of Wire 0.63 Mm 52 Gi Chicken Mesh 53 Gi Pipe 40Mm Dia 54 Gi Pipe 50Mm Dia 55 Gi Trafford Profile Sheet 0.35Mm Thick 56 Grafted Mango Sapling 57 Green Net 75% Shade 58 Hard Board 6 Mm Thick 59 Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper 60 Hollock Ballies 125 Mm Diameter 61 Interlocking C.C. Paver Block (60 Mm Thick, M-30) 62 Interlocking C.C. Paver Block (80 Mm Thick, M-30) 63 Iron Hooks & Eyes 100 Mm 64 Laterate Stone Of Size 40X20X15Cm 65 M.S. Tube 40 Mm Dia 66 Manglore Tiles 20Mm Thick 67 Metal Primer (U.G.) 68 Mild Steel Hooks 69 Mild Steel Plates 70 Mild Steel Rivets 71 Mild Steel Round Bar 12 Mm Dia And Below 72 Mild Steel Round Bar Above 12 Mm Dia 73 Mild Steel Sheets For Tanks 74 Mild Steel Sheets With Bolts And Nuts To Rest On Pintels 75 Mild Steel Tubes Electric Resistant Or Induction Butt Welded 76 Mild Steel Tubes Hot Finished Welded Type 77 Multi Surface Paint 78 Neoprene / Epdm Rubber Gasket 79 Pair Anodised Aluminium Lever Handles For 100 Mm Mortice Latch And Lock 80 Plastic Emulsion Paint 81 Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet 82 Polyurethene Bags 83 Portland Cement 84 Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm 85 Powder Coating 50 Microns On Aluminium Sections 86 Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement 87 Prelaminated Particle Board With One Side Decorative And Other Side Balancing Lamination, Flat Pressed 3 Layer & Graded (Medium Density) Grade I, Type Ii Conforming To Is:12823 (Exterior Grade) 12 Mm Thick 88 Premium Acrylic Emulsion Of Interior Grade, Having Voc Content Less Than 50Gm/Litre 89 Prop 2 M (2-3.5M) 90 Pvc Bend 110 Mm Dia 91 Pvc Bend 63 Mm Dia 92 Pvc Bend 75Mm Dia 93 Pvc Door Elbow 110 Mm Dia 94 Pvc Door Elbow 63 Mm Dia 95 Pvc Elbow 110 Mm Dia 96 Pvc Elbow 63 Mm Dia 97 Pvc Elbow 75Mm Dia 98 Pvc End Cap 63 Mm Dia 99 Pvc Pipe 110 Mm Outer Dia 6Kgf/Cm2 100 Pvc Pipe 150 Mm Outer Dia 6Kgf/Cm2 101 Pvc Pipe 25 Mm Outer Dia. 10Kgf Cm2 102 Pvc Pipe 50 Mm Outer Dia.6Kgf/Cm2 103 Pvc Pipe 63 Mm Outer Dia . 6Kgf/Cm2 104 Pvc Pipe 63 Mm Outer Dia 4Kgf/Cm2 105 Pvc Pipe 75 Mm Outer Dia 6Kgf/Cm2 106 Pvc Reducer 63X50 Mm Dia 107 Pvc Socket/Coupling 110 Mm Dia 108 Pvc Socket/Coupling 75 Mm Dia 109 Pvc Tee 63X63X63 Mm Dia 110 Pvc Vent Cowl 75 Mm Dia 111 Quarry Waste 112 Rawl Plug 50 Mm (Designation 10 Nos) 113 Rectangular Shape 453X357 Mm Mirror With Plastic Moulded Frame 114 Red Oxide Zinc Chromate Primer 115 Second Class Kail Wood In Planks 116 Second Class Kail Wood In Scantling 117 Second Class Kali Wood In Planks 118 Second Class Kali Wood In Scantling 119 Single Clip 120 Solid Blocks Of Size 30X20X15Cm 121 Solid Blocks Of Size 30X20X20Cm 122 Solid Block 40X20X20 123 Special Primer (C.W) 124 Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm 125 Stainless Steel Kitchen Sink Without Drain Board 470X420 Mm Bowl Depth 178 Mm 126 Stone Aggregate : 10 Mm 127 Stone Aggregate : 40 Mm 128 Stone Aggregate :20 Mm 129 Stone Aggregate(Sing Size): 06 Mm Nominal Size 130 Stone Aggregate(Single Size): 40 Mm Nominal Size 131 Stone For Masonry Work 132 Structural Steel Such As Tees , Angles , Channels And R.S. Joists 133 Structural Steel Such As Tees, Angles, Channels And R.S. Joists 134 Sundries 135 Synthetic Enamel Paint In Black Or Chocolate Shade 136 Through And Bond Stone Size 24 X 24 X 39Cm 137 Twisted Steel /Deformed Bar 138 Twisted Steel/Deformed Bars 139 Vibrator (Needle Type 40 Mm) 140 Vitreous China Flat Back Wash Basin 550X400 Mm 141 Vitreous China Flat Back Wash Basin 630X450 Mm 142 Vitreous China Orrisa Type W.C. Pan Size 580 Mm 143 Vitrified Floor Tile 60X60 Cm 144 Wall Form Panel 1250X450Xmm 145 Wall Form Panel 1250X500Mm 146 Water Proofing Cement Paint 147 Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre 148 Welding By Electric Plant 149 Wire Nails Please Enable Macros To View Boq Information
Basic Detail
Tender No SC2-3539/2025
Bidding Type Tender
Location
City Palakkad
State Kerala
Key Dates
Publish Date 27 Jun 2026
Submission Date 18 Jul 2026
Open Date 20 Jul 2026
Finance
Tender Value 50 Lakhs
Tender Fee 2950
EMD 50000
Exemption Not Available
Document List
BOQ_1450038.xls
e068c5b6-cc76-423d-a29e-266e208af04f.html
nregs.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Jul 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1450038.xls

html

e068c5b6-cc76-423d-a29e-266e208af04f.html

pdf

nregs.pdf

pdf

Tendernotice_1.pdf

TenderDetail
Loading tenders