|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK: CERTAIN MAJOR REVENUE WORKS AT VARIOUS LOCATIONS AT CHAF BANGALORE CONTRACT AGREEMENT: GE(AF)/B/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc., complete all as speicified and as directed by Engr-in-charge. |
| 3 | Taking down chowkhats or frames exc 1.5 sqm but not exc 4 sqm with shutter (without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as speicified and as directed by Engr-in-charge. |
| 4 | Demolition brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as speicified and as directed by Engr-in-charge. |
| 5 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards /slabs/ blankets, any thickness including cover fillets etc., complete all as speicified and as directed by Engr-in-charge. |
| 6 | Material and labour for 8 to 9 mm thick pre painted gypsum building boards of size 595x595mm PVC laminated at back side of board insulation and acoustic purpose flat in ceiling fixed or laid/ including powder coated GI snap grid of size 605x605mm frame work using 36.50x23.50x1.5mm main Tee, 23.50x23.50x1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4mm dia G.I (upto 1.5m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as speicified and as directed by Engr-in-charge.Note: The rate inclusive of scaffolding and necessary arrangements. |
| 7 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door, openings, etc., or cutting out, defective brick work for under-pinning, including, providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc., to store and rubbish not exc 50m complete all as speicified and as directed by Engr-in-charge. |
| 8 | Supply and fix for pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as speicified and as directed by Engr-in-charge. |
| 9 | Material and labour for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as filled in pressed steel foor frames etc., complete all as speicified and as directed by Engr-in-charge. |
| 10 | Supply and fix for 35mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commecrcial ply or 12mm veneered particle board with commecrcial veneering on both face. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as speicified and as directed by Engr-in-charge. |
| 11 | Supply and fix for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as speicified and as directed by Engr-in-charge. |
| 12 | Supply and fix for 100mm long aluminium handles, cast type, anodised complete all as speicified and as directed by Engr-in-charge. |
| 13 | Supply and fix for 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as speicified and as directed by Engr-in-charge. |
| 14 | Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as speicified and as directed by Engr-in-charge. |
| 15 | Material and labour for preparation of new wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enameled paint over one coat of pink primer complete all as speicified and as directed by Engr-in-charge. |
| 16 | Providing and fixing in repairs powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as speicified and as directed by Engr-in-charge.Note: All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections /fittings. |
| 17 | Material and labour for type D-2, 1:4:8 (Using 40mm graded stone aggregate) as in foundations fillings, mass concrete sub base of floor complete all as speicified and as directed by Engr-in-charge. |
| 18 | Material and labour for type B-2, 1:2:4 (Using 40mm graded stone aggregate) as in pilasters, buttresses, columns, pillars, boundary pillars and posts (incl caps and bases) complete all as speicified and as directed by Engr-in-charge. |
| 19 | Material and labour for 25mm thick cement concrete type B1 1:2:4 (Using 20mm graded stone aggregate) as in levelling concrete finished even and fair to recive floor finshes complete all as speicified and as directed by Engr-in-charge. |
| 20 | Material and labour for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.18 sqm but not exc 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar 1:6 laying floor finish complete all as speicified and as directed by Engr-in-charge. |
| 21 | Material and labour for precast cement concrete block masonry with soild blocks, type C1 1:3:6 (Using 20mm graded stone aggregate) exc 10cm in width and setting in cement mortar 1:6 complete all as speicified and as directed by Engr-in-charge. |
| 22 | Material and labour for providing cement concrete type B-0 1:2:4 (Using 12.5mm graded stone aggregate) as in roof kerbs, padding or mud stops, rounded or chamfered on edges complete all as speicified and as directed by Engr-in-charge. |
| 23 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as speicified and as directed by Engr-in-charge. |
| 24 | Material and labour for rendering 10mm thick in cement mortar 1:6 and 5mm thick in cement mortar 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc., finished even and smooth without using extra cement complete all as speicified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separetely. |
| 25 | Material and labour for glazed ceramic tiles coloured of size 450x300x7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles with 10mm thick rendering 1:3 for laying wall finishes complete all as speicified and as directed by Engr-in-charge. |
| 26 | Material and labour for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and tabil top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as speicified and as directed by Engr-in-charge. |
| 27 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduitwiring, etc., and making good, cutting exc 20cm girth complete all as speicified and as directed by Engr-in-charge. |
| 28 | Supply and fix for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as speicified and as directed by Engr-in-charge. |
| 29 | Supply and fix for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as speicified and as directed by Engr-in-charge. |
| 30 | Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastnings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., Fe-410 (gde E-250) complete all as speicified and as directed by Engr-in-charge. |
| 31 | Supply and fix for plates (plain or chequered) channels, distance pieces, cleats etc., square cut or notched including riveted, bolted or welded attachment complete all as speicified and as directed by Engr-in-charge. |
| 32 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., similar work conforming to Fe.290. Gde-E-165 complete all as speicified and as directed by Engr-in-charge. |
| 33 | Supply and fix for welded steel wire fabric supplied and fixed complate to wood or steel members complete all as speicified and as directed by Engr-in-charge. |
| 34 | Supply and fix for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as speicified and as directed by Engr-in-charge. |
| 35 | Supply and fix for powder coated aluminium door shutters (any type, normal or sliding), aluminium section powder coating (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as speicified and as directed by Engr-in-charge. |
| 36 | Supply and fix for 12mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as speicified and as directed by Engr-in-charge. |
| 37 | Supply and fix for 5.5mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exc 0.5 sqm in each panel complete all as speicified and as directed by Engr-in-charge. |
| 38 | Supply and fix for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as speicified and as directed by Engr-in-charge. |
| 39 | Supply and fix for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as speicified and as directed by Engr-in-charge. |
| 40 | Supply and fix for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as speicified and as directed by Engr-in-charge. |
| 41 | Supply and fix for 110mm bore PVC (SWR) bends any radius complete all as speicified and as directed by Engr-in-charge. |
| 42 | Supply and fix for 75mm bore PVC (SWR) bends any radius complete all as speicified and as directed by Engr-in-charge. |
| 43 | Supply and fix for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as speicified and as directed by Engr-in-charge. |
| 44 | Material and labour for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as speicified and as directed by Engr-in-charge. |
| 45 | Material and labour for applying 2mm thick wall care putty on wall including preparation old surface /new surfaces plastered or unplastered surfaces complete all as speicified and as directed by Engr-in-charge. |
| 46 | Material and labour for preparing new plastered or unplastered old surface of walls and applying two coats of cement base paint on walls including with alkali resistant primer complete all as speicified and as directed by Engr-in-charge. |
| 47 | Material and labour for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as speicified and as directed by Engr-in-charge. |
| 48 | Material and labour for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth including preparing roof painting complete all as speicified and as directed by Engr-in-charge. |
| 49 | Surface excavation not exc 30 cms deep and averaging 15cm deep and getting out soft /loose soil etc., complete all as speicified and as directed by Engr-in-charge. |
| 50 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil etc., complete all as speicified and as directed by Engr-in-charge. |
| 51 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cms thick with soils in soft /loose soil etc., complete all as speicified and as directed by Engr-in-charge. |
| 52 | Removing excavated material exc 1.50 Km but not exc. 5 Km and depositing where directed (out of MoD land) complete all as speicified and as directed by Engr-in-charge. |
| 53 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as speicified and as directed by Engr-in-charge. |
| 54 | Material and labour for providing cement concrete type B0 1:2:4 (Using 12.5mm graded stone aggregate) as in coping, roof kerbs or mud stops, rounded or chamfered on edges etc., complete all as speicified and as directed by Engr-in-charge. |
| 55 | Material and labour for mild steel TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speicified and as directed by Engr-in-charge. |
| 56 | Material and labour for providing precast cement concrete type B1 1:2:4 (Using 20mm graded stone aggregate) as in landings, chamber/ cover slabs (for man holes etc.,) and similar articles with plain faces and set in CM 1:6 where required complete all as speicified and as directed by Engr-in-charge. |
| 57 | Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces of walls complete all as speicified and as directed by Engr-in-charge. |
| 58 | Material and labour for 100mm thick hardcore of gauge not exc 63mm of broken stone, deposited, spread and levelled in layers not exc 15cms thick, watered and rammed to a true surface complete all as speicified and as directed by Engr-in-charge. |
| 59 | Material and labour for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as speicified and as directed by Engr-in-charge. |
| 60 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as speicified and as directed by Engr-in-charge. |
| 61 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as speicified and as directed by Engr-in-charge. |
| 62 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as speicified and as directed by Engr-in-charge. |
| 63 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as speicified and as directed by Engr-in-charge. |
| 64 | Material and labour for preparation of newly plastered or unplastered concrete surfaces (obtaining smooth surface) of any description not otherwise described over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as speicified and as directed by Engr-in-charge. |
| 65 | Surface excavation not exc 30 cms deep and averaging 15cms deep and getting out hard /dense soil complete all as speicified and as directed by Engr-in-charge. |
| 66 | Material and labour for 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) in sub base of flooring or pavings etc., complete all as speicified and as directed by Engr-in-charge. |
| 67 | Material and labour for 75mm thick cement concrete type B2, 1:2:4 (Using 40mm graded stone aggregate) as in flooring or pavings etc., complete all as speicified and as directed by Engr-in-charge. |
| 68 | Supply and fix for PCC coloured interlocking (glossy finishing) paver blocks with grey cement and no pigments confirming to IS-15658-2006 of 60mm thickness, M-35 grade as in hard standing etc., laid over and including 50mm thick screed or bedding layer of sand complete all as speicified and as directed by Engr-in-charge. |
| 69 | Supply and fix for fancy SS brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50 sqcm in section complete all as speicified and as directed by Engr-in-charge. |
| 70 | Supply and fix for fancy SS brackets with rounded fancy type dead end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50 sqcm in section complete all as speicified and as directed by Engr-in-charge. |
| 71 | Supply and fix for 25mm dia staineless steel fancy type curtain rod complete all as speicified and as directed by Engr-in-charge. |
| 72 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement complete all as speicified and as directed by Engr-in-charge. |
| 73 | Material and labour for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as speicified and as directed by Engr-in-charge. |
| 74 | Material and labour for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper using mechanical means over a coat of chalk whitening complete all as speicified and as directed by Engr-in-charge. |
| 75 | Material and labour for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as speicified and as directed by Engr-in-charge. |
| 76 | Supply and fix for 7 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipe is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling including making good existing finishes complete all as speicified and as directed by Engr-in-charge. |
| 77 | Material and labour for point wiring concealed type with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable including continuous earth wire of size 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, including metal flush box of 1.6mm thick suitable for modular switches/ sockets/fan regulators including modular white cover plate and modular metal flush box with frame of required modules at site, blanking plates, brass screws, cup washers etc., including all cutting / chases etc., in stone/ brick masonary/ walls, pinning in stone walls/ brick walls and pointing in cement mortar 1:3 to ends or edges of landing etc., for concealed conduit wiring using heavy duty stone drilling /cutter machine and making good to the disturbed surfaces to match the existing for the followings complete all as speicified and as directed by Engr-in-charge:- |
| 78 | One light point controlled by one, one way switch 06 Amps. |
| 79 | One ceiling fan point controlled by one, one way switch 06 Amps. |
| 80 | One wall fan point controlled by one, one way switch 06 Amps. |
| 81 | One exhaust fan point controlled by one, one way switch 06 Amps. |
| 82 | One 3/ 5 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch. |
| 83 | One 3/ 5 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch. |
| 84 | All as per item No.79 here-in-before but point wiring with 2.5 sqmm single core FRLSH cables and earth continuity wire of 2.5 sqmm single core FRLSH cable for one 3/ 6 pin 16 Amps socket outlet point controlled by one, one way switch on independent board complete all as speicified and as directed by Engr-in-charge. |
| 85 | Supply and fix for modular switch, 10 Amps, single pole, one way, 230 volts, one module complete all as speicified and as directed by Engr-in-charge. |
| 86 | Supply and fix for modular switch, 16 Amps, single pole, one way, 230 volts complete all as speicified and as directed by Engr-in-charge. |
| 87 | Supply and fix for modular socket outlet 5 Pin, 06 Amps, 02 module with shutter complete all as speicified and as directed by Engr-in-charge. |
| 88 | Supply and fix for modular socket outlet 2 in 1, 3/6 pin, 16 Amps, 2 module with shutter complete all as speicified and as directed by Engr-in-charge. |
| 89 | Supply and fix for ceiling rose, 65x50mm surface type with 3 terminals including connection complete all as speicified and as directed by Engr-in-charge. |
| 90 | Supply and fix for electronic ceiling fan regulator, stepped type of 0 to 4 rotary steps, electronic, 2 module, humfree, AC, 230 volts, 100 watts complete all as speicified and as directed by Engr-in-charge. |
| 91 | Supply and fix for ceiling fan complete with three blades, down rod of required length as directed, accessories 230 V, 1200mm sweep, min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) complete all as speicified and as directed by Engr-in-charge. |
| 92 | Supply and fix for wall mounting fan 400mm sweep, 1350 RPM, adjustable, plastic blade grill for protection, pull cord control for speed and oscillation on-off, including connection complete all as speicified and as directed by Engr-in-charge. |
| 93 | Supply and fix for exhaust fan, 300mm sweep, steel body, AC single phase, 230V of with blades, frame, shutters and louvers with all electrical wire connection making necessary hole arrangement in wall of any type of required size for fixing of exhaust fan including necessary plastering and civil work as required for proper fixing of exhaust fan and matching of surface with existing surface complete all as speicified and as directed by Engr-in-charge. |
| 94 | Supply and fix for on surface /wall mounted LED batten, robust extruded and initigrated electronic drive 20 watt, 4 feet with accessories and connection complete all as speicified and as directed by Engr-in-charge. |
| 95 | Supply and fix for surface /ceiling mounted LED panel type of size 600x600mm, 36 W, 230 V, white/ warm white type complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing with all accessories required for connection and making good the disturbed ceiling complete all as speicified and as directed by Engr-in-charge. |
| 96 | Material and labour for sub main wiring with 4 sqmm nominal cross sectional area, two single core, 1100 volts grade, multistranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 sqmm nominal cross sectional area, single core, 1100 volts grade, multistranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chases, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as speicified and as directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 97 | All as as per item No.90 here-in-before but for 2x6 sqmm for phase and neutral and 1x6 sqmm for continuous earth wire complete all as speicified and as directed by Engr-in-charge.Note for item Nos. 92 and 93: Chasis/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concealed sub main wiring shall be measured and paid separately under relevant item of this schedule. |
| 98 | Cutting chasis, pinning in stone walls/ brick walls etc., making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc., for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/ cutter machine and making good disturbed surface complete all as speicified and as directed by Engr-in-charge. |
| 99 | Supply and fix for sheet metal enclosure DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs including chases wall for fixing DB and making good to the disturbed surface for the following No of ways complete all as speicified and as directed by Engr-in-charge. |
| 100 | 4 way |
| 101 | 8 way |
| 102 | Supply and fix for sheet metal enclosures with socket plug top and MCB, single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20 Amps, 'C' curve including connection complete all as speicified and as directed by Engr-in-charge. |
| 103 | Supply and fix for MCB SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs for the following rating complete all as speicified and as directed by Engr-in-charge. |
| 104 | 40 Amps |
| 105 | 63 Amps |
| 106 | Supply and fix for MCB SP, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs for the following rating complete all as speicified and as directed by Engr-in-charge. |
| 107 | 10 to 32 Amps |
| 108 | 40 Amps |
| 109 | Supply and laying or fixing or passing through pipe of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete of size 10 sqmm 2 core complete all as speicified and as directed by Engr-in-charge. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
