|
| 1 | Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each including fair finish of existing plaster surface complete all as specified and as directed . |
| 2 | Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each fair finish of existing plaster surface complete all as specified and as directed . |
| 3 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. |
| 4 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, repairing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and as directed.(Note : Hinges shall be measured and paid separately) |
| 5 | Repairs existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper and complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed . |
| 7 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS fram welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement. |
| 8 | S&F for pressed steel frames of size 125X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc complete all as specified and as directed. |
| 9 | S&F for pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed. |
| 10 | M&L for PCC 1:3:6 type C-0 using 12.5mm graded aggregate in hollow portion of pressed steel door/window frames including compaction and curing complete all as specified and directed. |
| 11 | S&F for 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 12 | S&F for 35mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply .The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 13 | M&L for 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed. |
| 14 | S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples and fix with wooden bidding complete all as specified and as directed. |
| 15 | S&F for mild steel ordinary rat tail rod pattern spring 250mm size including roller & roller plate and incl welding complete all as specified and as directed. |
| 16 | S&F for 140mm length aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and as directed. |
| 17 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100X65 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additive(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressivestrength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).complete as per direction of engr-in-charge. |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 19 | S&F of factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 20 | S&F of stainless steel butt hinges of size 100 mm, with necessary stainless steel screws, complete all as specified and directed. |
| 21 | S&F of 200 mm long Stainless Steel Handle, made of SS Grade 304, finished with satin/matt polish, including all necessary screws, rawl plugs, drilling holes in wood/steel/aluminium/wpc surfaces, and fixing complete in all respects as specified and directed. |
| 22 | S&F of 200 mm long Stainless Steel Tower Bolt , made of SS Grade 304, with necessary screws, finished with satin/matt polish, including drilling holes in wpc/wooden/steel/aluminium frames/shutters and fixing complete in all respects as specified and directed. |
| 23 | S&F of 250 mm long Stainless Steel sliding tower bolt with hasp and staple (bolt type) and fixing clips of sheet, made of SS Grade 304, with necessary screws, finished with satin/matt polish, including drilling holes in wpc/wooden/steel/aluminium frames/shutters and fixing complete in all respects as specified and directed. |
| 24 | M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 25 | M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 26 | S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 27 | S&F of powder coated aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified. |
| 28 | S&F for powder coated aluminium window and ventilator shutters, side hung and sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 29 | M&L for powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 30 | M&L for 4.8mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed. |
| 31 | S & F of mortice lock brass 4 levers vertical type without handle, size 100mm complete all as specified and as directed. all as specified and directed approved by accepting officer |
| 32 | S&F of aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. |
| 33 | S&F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty including taking down of onld one and fixed . complete all as specified and directed. |
| 34 | S&F for aluminium partition (0.8-1.2 kg/rm weight) work using extruded aluminium sections of approved make (such as Jindal/Hindalco or equivalent) for frame, vertical and horizontal members including cutting, fabrication, assembling and fixing in position with necessary screws, cleats, angle brackets etc., complete.The aluminium sections shall be powder coated finish of minimum 1.2–1.5 mm thickness, including providing and fixing 5 mm thick clear glass / prelaminated particle board / gypsum board panels as specified, fixed with EPDM rubber gasket, glazing clips, beading etc.The work includes providing and fixing all fittings such as handles, locks, tower bolts, door closer (if required), including sealing joints with silicone sealant, finishing edges properly, and making good the surrounding surfaces including taking down old partiton complete in all respects as specified and directed. |
| 35 | S&F for toughened (tempered) safety glass of approved make conforming to IS 2553 (Part-1), of 10 mm / 12 mm thickness as specified, including cutting to required size, machine polished/arrised edges, necessary cut-outs for fittings, and fixing in position in aluminium channels / SS patch fittings with EPDM rubber gaskets, setting blocks, structural silicone sealant, anchor fasteners, etc.,SS handle (450–600 mm length, 25–32 mm dia) including taking down of old toughened glass complete all as specified and directed. |
| 36 | S&F in replacements aluminium Mortice lock vertcle type size 100 mm 4 lever type complete all as specified and directed. |
| 37 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed. |
| 38 | S&F in replacement cupboard shutters made of 18 mm thick Prelaminate HDHMR/MDF board, conforming to relevant IS specifications, factory pressed, including 2 mm thick PVC edge banding on all exposed edges, fixed to M.S. frame fabricated out of MS box section 25x25x1.6 mm thick complete with welding, grinding and two coats of synthetic enamel paint over one coat of zinc chromate primer, fixed in position with SS screws and approved fittings complete.Including supplying and fixing SS-304 grade soft/self-closing hinges 100 mm long not less than 1.5 mm thick, SS-304 handles 150 mm long, magnetic catcher one for each shutter, SS tower bolt 150 mm long, and SS hasp & staple 100 mm long complete, including dismantling carefully old unserviceable cupboard shutters including frame, removing debris outside defence land and making good disturbed surfaces complete all as specified and directed. |
| 39 | S&F in replacements 100mm Hasp and staple, aluminiumn anodised wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 40 | S&F in replacement 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed |
| 41 | S&F in replacement 200 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed |
| 42 | S&F in replacement 250mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed. |
| 43 | S&F in replacement SS butt hinges of 100 mm size medium weight fixed to existing frame complete all as specified and directed |
| 44 | S&F in replacement mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed |
| 45 | S&F in replacement mild steel ordinary rat tail rod pattern spring 250mm size including roller & roller plate and incl welding complete all as specified and as directed. |
| 46 | S&F in replacement 150mm size aluminium anodized handle complete all as specified and as directed. |
| 47 | S&F in replacement 200mm size aluminium anodized handle complete all as specified and as directed. |
| 48 | S & F in repairs 140 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed. |
| 49 | S&F of Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size with stainless steel ISI marked fittings as auto hinges (02 Nos in each shutter),75mm/100mm ss fancy handles (01 No in each shutter ) comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with 35mm stainless Steel auto cup hinges (if shutter height 600mm-2 hinges,600-900mm-3 hinges,900-1200mm-4 hinges) with necessary full body threaded star headed counter sunk SS Screws.All as per direction of Engineer -In-Charge. For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets. |
| 50 | S&F of 6 mm thick WPC (Wood Polymer Composite) board of approved make and shade as back panel of cupboards/cabinets, fixed in grooves or with suitable screws, including cutting, edge finishing, necessary supports, fixtures and fasteners,all specifications will be match above item no. 50 complete all as specified and directed. |
| 51 | S & F of MDF Board 18-19 mm thick of any size provided for kitchen shelves, partitions,cupboard door, with stainless steel ISI marked fittings as self closing cup hinges (if shutter height 600mm-2 hinges,600-900mm-3 hinges,900-1200mm-4 hinges),75mm/100mm ss fancy handles (01 No in each shutter ) & magnetic locks and any other fittings required, shape/pattern complete all as specified & directed by Engineer -in -Charge. |
| 52 | S&F in replacement 6 mm thick MDF board of approved make and shade as back panel of cupboards/cabinets, fixed in grooves or with suitable screws, including cutting, edge finishing, necessary supports, fixtures and fasteners,all specifications will be match above item no. 52 complete all as specified and directed. |
| 53 | S&F in replacement chromium plated 35mm self close cup hinges for kitchen cabinets,cupboard etc. fixing with ss screws complete all as specified and directed |
| 54 | S&F in replacement 100mm SS handles for kitchen cabinets,cupboard,doors etc complete all as specified and directed |
| 55 | S&F in replacement 75mm SS handles for kitchen cabinets,cupboard,doors etc complete all as specified and directed |
| 56 | S&F in replacement 25mm dia stainless steel curtain rod with fancy type fixing brackets, stops, rollers,finials etc. complete all as specified and directed by Engr-in-charge.(Note : Entire work will be done/ executed in patches of any qty and any size all as specified by Engr-in-charge) |
| 57 | S&F in replacement stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples of any type of windows and doors i.e. wooden, steel or aluminium including opening and refixing of frame, shutter or shutter elements if required and new wooden beads in wooden doors, complete all as specified and as directed. and directed. |
| 58 | Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed. |
| 59 | S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 60 | S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 61 | S&F for 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed. |
| 62 | S&F for 3mm thick figured glass, pin head type and glazing with putty in square exceeding 0.50 Sqm in each pane complete all as specified and as directed. |
| 63 | S&F in replacement double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty including taking down of onld one and fixed . complete all as specified and directed. |
| 64 | S&F in replacement aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width complete all as specified and directed. |
| 65 | M&L for running welding in repairs for metal thick not exc. 6mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding & bevelling of edges as required, complete all as specified and as directed. |
| 66 | M&L for welding in repairs n. exc 2.5cm in length Thickness of metal to be welded N exc 6mm complete all as specified and as directed. |
| 67 | Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 68 | M&L for 15 mm thick Ready Mix Cement Plaster on brick/stone/PCC/RCC wall surfaces, mixed and applied as per manufacturer's specifications, suitable for external/heavy-duty applications, finished fair and even, including scaffolding, curing and all incidental works, complete in all respects. |
| 69 | M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over & including M&L single coat of interior wall primer complete all as specified and directed. |
| 70 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 71 | M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm grade aggregate) as in levelling coarse in flooring finished even and fair under floor finishes. |
| 72 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles including dismantling of old tiles complete all as specified. |
| 73 | M&L for Non Skid ceramic tiles colour tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes including demolition of old tiles complete all as specified. Note : Work will be in patches or in bulk |
| 74 | M & L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc.including demolition of old tiles complete all as specified. |
| 75 | Ditto as item 74.00 here-in-above but as in skirting over cement mortar backing plaster in CM1:3 10mm thick including dismantling of old tiles complete all as specified and directed. |
| 76 | S&F in repair 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 77 | S&F in repair 25mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed. |
| 78 | S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 79 | S&F in repair two way 15mm bore CP fancy type angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 80 | S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 81 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. |
| 82 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including P or S trap, connection to drain (or outgoing pipe) and to flushing pipe 32mm PVC with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device,flushing cistern of 10ltr capacity complete all as specified. |
| 83 | S&F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap,including flushing cistern of 10ltr capacity and 32mm flush pipe, including trap and provn of cement concrete bedding complete as fixed complete all as specified. |
| 84 | Dismantling of water tanks (RCC hume/PVC) Exc 250 and n exc 500 ltrs including disconnecting all connections etc. complete for following capacity of tanks complete all as specified and directed. |
| 85 | Dismantling of water tanks (RCC hume/PVC) Exc 500 and n exc 1000 ltrs including disconnecting all connections etc. complete for following capacity of tanks complete all a specified and directed. |
| 86 | S&F for new rotational moulded polythylene water storage tank 500 ltrs (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore and tank nipple complete all as specified and directed. |
| 87 | S&F for new rotational moulded polythylene water storage tank 1000 ltrs (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore and tank nipple completeall as specified and directed. |
| 88 | Cutting chases, holes in Brick walls, Stone walls, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. |
| 89 | M&L for Ready mix plaster 15mm thick on other than fair faces of brick work or stone surfaces or rcc member , finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed. |
| 90 | M & L for Ready mix plaster 5 mm thick on ceiling surfaces finished even and smooth without using extra cement, including taking down old plaster complete, all as specified and directed. |
| 91 | M&L for 10mm Ready mix plaster for dubbing coat for the additional thickness( of ant thickness) is provided as floating/setting coat for stone masonary wall plaster including taking down old plaster complete all as specified and directed by Engineer-in-Charge. |
| 92 | M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of white wash complete all as specified and directed. |
| 93 | M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. |
| 94 | M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of oil bound distemper/ emulsion complete all as specified and directed. |
| 95 | M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of white wash complete all as specified and directed. |
| 96 | M&L for preparing old plastered or unplastered surfaces of ceiling, including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of white wash complete all as specified and directed. Please Enable Macros to View BoQ information |
| 97 | M&L for preparing old plastered or unplastered surfaces of ceiling, including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of white wash complete all as specified and directed. Please Enable Macros to View BoQ information |
