|
| 1 | Demolition of brickwork built or precast concrete articles in cement mortar complete all as specified and as directed. |
| 2 | M&L for Brick work with sub class B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 3 | All as per above item No 02, but except bricks -ditto- |
| 4 | M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed. |
| 5 | M&L for applying two coats of exterior emulsion paint white or tint on walls over primer including preparation of new surfaces complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | S & F in repair for sign board of size 1520x1060mm made of 2mm thick ACP sheet. The board shall be covered using 3M India type IV retroreflective sheet of Blue colour,the letter on it shall be of white colour. The board shall be supported by 50mm bore stainless steel round pipe and 25mm tubular pipe around the edge of sign board.The SS pipe of size 50mm has overall length approx 3300mm and tubular pipe of size 25mm has overall length approx. 4260mm each including cutting and gun welding,polishing buffing complete with necessary holes,nuts and bolts caps and anchor plates of SS grade 304 ASTM as per drawing and instructions of Engr-in-Charge including PCC 1:2:4 type B-1(using 20mm graded aggregate) cast in situ at each legs for fixing sign board including necessary earth work complete all as specified and directed. |
| 8 | Digging of sand/soil from stop butt along inclined surface and the same is sieved and remove debris from it and then mix the old sand with new/supplied sand and saw dust and refilling the same mix in loose state into the stop butt complete all as specified and directed. Note:New sand & saw dust paid separately |
| 9 | Supply only fine sand at site complete all as specified and directed. |
| 10 | Supply only saw dust(timber) at site complete all as specified and directed. |
| 11 | Excavation in post holes each n exc 0.5 cum getting out, returning, filing in and removing earth or brocken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m in soft/loose soil and making good surface. |
| 12 | M&L cement concrete type C-2 1:3:6 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 13 | S & F angles iron post & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar work confirming to Fe- 290 Gde E-165 complete all as specified and directed. |
| 14 | M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified |
| 15 | M & L preparation of old painted surface or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 16 | S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting any gauge/thickness in roof covering etc, complete all as specified and as directed. |
| 17 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed . |
| 18 | M & L for type B-1 reinforced cement concrete slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. (Note : Reinforcement shall be measured and paid seperately). |
| 19 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)all as specified and directed. |
| 20 | S & F TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and includingmild steel wire(annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 21 | M&L for applying two coats of exterior emulsion paint white or tint on walls/ road kerb stones including preparation of old painted surfaces after complete removal of algae/existing treatment complete all as specified and directed. Please Enable Macros to View BoQ information |
