|
| 1 | Excavation in foundation in ordinary soil (loam clay, or sand) including lift upto 1.5 metre and lead upto 30 m & including filling, watering and ramming of excavated earth into the trenches or into the space bwtween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge of 30 m from the foundation trenches. |
| 2 | Local sand filling to be don in 20cm layers including remainig and dressing Pulverization the surface to required level and slops and also Including proper completion of the Work as per most specification S.I |
| 3 | Providing and laying base concrete 1:4:8 Cement C/sand and 40mm gauge stone ballast including supply of all material labour T&P etc all complete S.I. 281 |
| 4 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors & window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item 283 above but in Rcc column in 1:1.5:3 S.I No 289 |
| 5 | Mild steel or iron work such as RB or R.C.C. work including etc all complete .S.I. 504 |
| 6 | Ist class brick work in found 1:4 cement and c/sand mortar including supply of All material labour T&P etc all complete n.s. |
| 7 | 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even smooth S.I No 13.4 |
| 8 | Supply & fixing of 16 mtr High mast shaft of Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & outside dip,heaving pole sheet thickness 3 mm. Top diaminium 150 mm, Bottom dia 360 mm base plate 32 mmthick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories forhigh mast such as head frame suitable for 6 to 12luminaries & its control gear boxes 1.5 HP power toolmoter, 3 point suspension system with steel wire rope 6mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuimentalong with foundation bolts nuts, washers, anchor platesetc completee in all respect. s.I no 652 E.Sor |
| 9 | Erection of 16.00 m high mast with all acc with the help of suitable equipments or with the help of modern engineering practices with the help of mobile Hydraulic Crane S.I No 115 |
| 10 | Supply and fixing following capacity of automaticSupply and fixing following capacity of automaticstreet light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting oftime switch TSO 100 series with contactors, HRCfuses, isolating switch metering instrument &instrument box with CTs etc. in case of TPN,complete in all respect. S.I No 807 Page no 147 |
| 11 | fuses, isolating switch metering instrument &Providing the following component (switching acc.) inside the fidder piller including internal wiring all.Complete for autometic, timely OFF/ON for operating of (6 to 8 nos) 180 LED lighgting fitting.isolater 1 no. ii)240 V contractor- 1 no.iii) Day dial timer (GIC)- 1 noiv) By pass switch- 1 no(v) outlet Terminal - 2 nos.S.I s.I No 345 |
| 12 | Supply and fixing of factory wired integral LEDSupply and fixing of factory wired integral LEDflood light luminaires with die cast aluminiumhousing built with dirver set suitable for 170 to 200Watt. Confirming to IP 66 protection complete in allrespect. S.I no 1455 Page No198 |
| 13 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.. Including welding, grinding,buffing. Polishing and making curature ( wherever required) andfitting the same with necessary stainless steel nuts and boltscomplete, i/c fixing the railing with necessary accessories andstainless steel dash fasteners, stainless steel bolts etc. of requiredsize, on the top of the floor or the side of waist slab with suitablearrangment as per approved of Engineering-in-charge (for paymentpurpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.) S.I no 10.28 |
| 14 | Supply & fixing steel tubular pole 7 Metre longdesignated 410 SP-3 in 1:3:6 cement concretefoundation including excavation back filling etc.complete in all respect. S.I No 604 Chapter nos-6 page no 130 |
| 15 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive &conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. S.I 725 (b) Page No 139 |
| 16 | Supply and wiring of submains with 2 nos. 2.5 sq mm &with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated1100 V grade single core multistrand copper conductorcable in existing PVC conduit complete, includingsupply of all material, labour and T & P etc. required forproper completion of the work as directed by Engineer incharge.Metre 70.00 7.00291 (A) Same as in item 291 |
| 17 | Supply and Wiring of submains with two nos. of 2.5 sq.mm.FRLSH PVC insulated 1100 V grade single coremultistrand copper conductor cable in existing conduitcomplete with supply of all material labour and T&Prequired for proper completion of the work as directed atsite by Engineer in charge. S.I 289 |
| 18 | Supply and fixing of National Indian flag (M.R) |
| 19 | Retro Reflective signs (Stainless steel Frame and post withone side sings)Supply and fixing of reflective sign board (single side) of size1.50x120m retro reflective sheeting of HIP grade type-IV. theboard shall be fixed on 50mm SS 304 grade pipe and reflectivesheet on 4mm thick. ACP sheet of standard make as perMORTH specification. The Board shall be fixed using 2 manpost 45x45x60 cm cementconcrete foundation, The stainlesssteel joint welding of SS pipe work shall be band and grinderproperly including bufting so an to give uniform shining atweded joints.The retro reflective sheeting tyep-IV shall betested for 3 year outdoor weathering test in Indian conditions asper IRC-67:2012 & proof of same in form of government reportshall be uploaded while quoting tender. S.I Morth-801(8.6) base |
| 20 | Tiranga L.e.D Strip Please Enable Macros to View BoQ information |
