Name of Work:- REPAIR/MAINTENANCE OF WATER SUPPLY INSTALLATION UG SUMP,OHR AND OTHER CONNECTED WORK AT SECTOR C UNDER GE (ARMY) BARODA.
Sl. No.
Item Description
1
Excavation in trenches not exc 1.5m wide & not exc 1.5m in depth for foundation for laying of CI /GI pipe line in trenches not exc 10sqm on plan & not exc 1.5m in depth & getting out in any type of soil.
2
Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil.
3
Removing excavated material to a distance not exc 50mtr and depositing where directed at level n exc1.5 mtr above the starting point
4
M & L for caulking of lead joint of spigot, socket, flanged GI/CI/DI pipe incl providing lead wool and making joint leak proof including necessay earth work/excavation and making good disturbed site,T&P and draining out water etc of following as directed.
5
150 mm bore
6
100 mm bore
7
S&F sluice valve cast iron both ends flanged class PN-1.6 conforming to IS-14846 with stainless steel spindle including joints & jointing materials (Rubber gasket, nut, bolts,washers etc) complete of following sizes Make Kirloskar/ Kartar/Leader
8
150 mm bore
9
100 mm bore
10
S & F aviation light fitting 302 LED wide operiting with light sensor for on/off directly, input voltage range 100 to 270 volt AC body shoud be made out of Die-cast aluminium housing with Red polycarbonate dome for better illumination integral driver super flux 5mm 302 Nos LEDs incorporated : IP65 copllete all as specified & directed by Engr-in-Charge.
11
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of sizes 2.5 Sqmm 2 core.
12
M&L brick masonry valve pit chamber of size 1200 mm X 1200 mm X 1200 mm(internal dimension) with 230 mm thick brick wall built in CM 1:6,complete with MS angle iron frame work (Angle Iron size 50mm x 50mm x 6mm) & 3.20 mm MS sheet top cover openable through hinges including neccesory locking arrangement PCC bed concrete 1:4:8, type D2 and rendering 15 mm thick with CM 1:4, and painting with two coat of black bituminous paint over a one coat red oxide primer to steel surfaces complete all as directed by Engr- in- Charge.. Please Enable Macros to View BoQ information
13
M&L brick masonry valve pit chamber of size 1200 mm X 1200 mm X 1200 mm(internal dimension) with 230 mm thick brick wall built in CM 1:6,complete with MS angle iron frame work (Angle Iron size 50mm x 50mm x 6mm) & 3.20 mm MS sheet top cover openable through hinges including neccesory locking arrangement PCC bed concrete 1:4:8, type D2 and rendering 15 mm thick with CM 1:4, and painting with two coat of black bituminous paint over a one coat red oxide primer to steel surfaces complete all as directed by Engr- in- Charge.. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
