Tender For Welcome Maintenance To Md Accn In Aor Of Age B/R Malad Under Ge (N) Santacruz Mumbai
Tender Value
25 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
9 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Md Accn In Aor Of Age B/R Malad Under Ge (N) Santacruz Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fix mild steel TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 2 | ditto as per item no.2 above but 5mm dia and over up to incl. 10mm dia in stirrups, spacers and binders complete all as specified as directed by Eng-in-charge. |
| 3 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 4 | Material and labour for 10 mm thick rendering in Cement Mortar (1:4) on internal wall surface including dubbing out plaster in Cement Mortar (1:6) of any thickness & finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for 15mm thick rendering on fair faces of brick or concrete surfaces, mixed with water proofing compound, in CM 1:4 finishing the surface even and smooth without using extra cement upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit |
| 8 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints/ Birla Opus paint |
| 9 | Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make:Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints/ Birla Opus paint |
| 10 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India/Birla Opus Paints ( Brand- One True life) |
| 11 | Material and labour for complete removal of existing treatment of old decorated WALL surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints/ Birla Opus paint |
| 12 | Material and labour for complete removal of existing treatment of old decorated CEILING surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints/ Birla Opus paint |
| 13 | Material and labour for complete removal of existing treatment of plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer over thick layer of external grade putty complete all as specified and as directed by Engineer-in-Charge.Make :APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India/Birla Opus Paints ( Brand- One True life) |
| 14 | Material and labour for preparation of WALL surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty |
| 15 | Material and labour for preparation of CEILING surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty |
| 16 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge |
| 17 | Material and labour for Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame complete all as specified and as directed by Engineer-in-Charge.Make: Greenply / Kitply / Century Plywood / Associates Decor Ltd |
| 18 | Material and labour for Prelaminated particle board 25mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame as cup board shutters complete all as specified and as directed by Engineer-in-Charge.Make: Greenply / Kitply / Century Plywood / Associates Decor Ltd |
| 19 | Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polishedl, bright finished complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Supply and fix Ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and as directed by Engineer-in-Charge. |
| 21 | Supply & Fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, Width of flaps (when open) 40 mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET |
| 22 | Material and labour for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux/Birla Opus paint |
| 23 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit IndiaNote:(i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed. |
| 24 | Supply and fix 4.0mm thick glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 25 | Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain |
| 26 | Supply and fix stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge |
| 27 | Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of Decogrille or equivalent , cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE |
| 28 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius, in half brick thick walls with old size bricks, built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 32 | Demolition of cement concrete(unreinforcement) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed |
| 33 | Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 15mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell |
| 36 | Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 15mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles/ Orient bell |
| 37 | Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm ,on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell |
| 38 | Material and labour for coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm (or nearest size) ,on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell |
| 39 | Material and labour for vitrified ceramic tiles, 10mm thick , (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 20mm thick in cement mortar 1:4 including scarifying the floor complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles |
| 40 | Material and labour for vitrified ceramic tiles, 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles/ Orient bell |
| 41 | Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid dry or laid dry and pointed and & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge |
| 42 | Material and labour for rounding the edges of stone slab as in steps, cooking platform and similar situations complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Material and labour for 20-25 mm thick machine cut cudappa stone slab in jambs / cills / soffits of window / ventilator as in frame work to support for aluminium section, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over backing coat 10 mm thick in CM (1:4)complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Material and labour for 20-25 mm thick machine cut cudappa stone slab in partition/ vertical surfaces as in kitchen platform complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Material and labour for granite (of any type) , 20mm thick, machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed. |
| 46 | Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed. |
| 47 | Supply and fix in repairs UPVC (SWR) multi floor trap outlet dia 75mm, plain with gratings including jointing etc complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme/Astral |
| 48 | Supply & Fix Toilet paper holder white of vitreous china fixed to walls with CP brass screws complete all as specified and as directed by Engineer-in- Charge. Make : CERA/ Hindustan/Parryware/Jaguar/Hindware/ Johnson |
| 49 | Supply & Fixing 2 way bib cock with side handle, flange and aerator bore dia of 15mm as in repairs complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F1003161 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson |
| 50 | Supply and fix in repair, health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook, including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge.Make : CERA/ Hindustan/Parryware/Jaguar/Hindware/ Johnson |
| 51 | Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge.Make : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 52 | Supply and fix in repairs concealed stop valve/angle cock, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-ChargeMake : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 53 | Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge.Make : Jaquar/ Marc/ CERA/ Kohler/ Player |
| 54 | Supply and fix in repairs 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar, Marc,CERA,Kohler, Player, Soma, Leade Zoloto |
| 55 | Supply & Fix in repairs snow white one piece EWC model name CASINO 660x350x760S trap 220mm with soft close seat cover including fixing with crew/bolts complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. S1013149 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson |
| 56 | Supply & Fix off white aluminium curtain rods of 25mm dia having corrosion resistant powder coated surface aluminium metal finish all as specified as directed by eng-in-charge |
| 57 | Supply & Fix in repairs for Harrison rail powder coated anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 58 | Supply only in repair 600 mm x 450 x 5mm mm bevelled edge mirror of selected quality glass, with PVC moulded frame decorative type, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and as directed by Engineer-in-Charge.Make : Modi/ Atul/ Saint Gobain |
| 59 | Supply and fix, corner glasses (3 in one set), fixed to wall with cadmium plated screws as specified and as directed by Engineer-in-Charge.Make-Prayag or equivalent as approved by GE |
| 60 | Supply and fix in repairs cabinet mirror 300 x 400mm, with 3 racked inside, PVC, 2mm thick and 4mm thick glass complete all as specified and as directed by Engineer-in-ChargeMake- Prayag/Cera |
| 61 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 4,205.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 26, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender