|
| 1 | Table dressing ladies with mirror (FD/MAP II/07))Supply & fixing of the following components/parts of table dressing ladies including dismantling unserviceable components all as specified and shown on drg. Replacement of unserviceable looking mirror 5mm thick alongwith frame with 3/4 mm thick plywood all as shown in drawings. |
| 2 | All as per ser item No 1.01 here in before but replacement of shutter both side left/right made of prelaminated particle board Teak face with 4 mm Teak wood beading as per drg. |
| 3 | All as per item No.1.01 here in before but replacement of unserviceable drawer with handle as per drawing |
| 4 | All as per item No.1.01 here in before but replacement of back particle board 18mm thick as per drawing |
| 5 | M& L for French polish to table dressing ladies complete all as specified |
| 6 | Table dressing Gents with mirror (FD/E6/MAP/16)Supply & fixing of the following components/parts of table dressing Gents including dismantling unserviceable components all as specified and shown on drg. Replacement of unserviceable /looking mirror 5mm thick alongwith frame as per drawing. |
| 7 | M&L for French polish to table dressing Gents complete all as specified. |
| 8 | Table 900x600x760 with and without drawer (FD-42 & FD-231)Supply & fixing of the following components/parts of table 900x600x760mm using 1st class seasoned hard wood Teak, including dismantling of unserviceable components all as specified and shown on drg. Replacement of unserviceable top of table 900x600x760mm made from 18/19mm thick Prelaminated Particle Board Teak Faced. including hard wood (Teak) edging all around the table fixed with nails all as shown in drg and directed by Engineer-in Charge. |
| 9 | All as per item No 3.01 here in before but replacement of unserviceable leg as per drg |
| 10 | All as per item No.3.01 here in before but replacement of unserviceable top long rail as per drg |
| 11 | All as per item No.3.01 here in before but replacement of unserviceable top short rail as per drg. |
| 12 | All as per item No.3.01 here in before but replacement of unserviceable stiffener complete 'H' type as per drawing. |
| 13 | All as per item No.3.01 here in before but replacement of unserviceable triangular support as per drawing. |
| 14 | M& L for French polish to table 900x600x760mm wooden portion complete all as specified. |
| 15 | Supply and fixing of good quality of plastic buffer |
| 16 | Table centre (FD-29 FD-134 FD-235)Supply & fixing of the following components/ parts of table centre using 1st class seasoned hard wood Teak including dismantling of unserviceable components all as specified and shown on drg. Replacement of unserviceable top made of 18/19mm thick Prelaminated Particle Board Teak Faced. including hard wood (Teak) edging all around the table fixed with nails all as shown in drg and directed by Engineer-in Charge |
| 17 | All as per item No.4.01 here in before but replacement of unserviceable leg as per drg |
| 18 | All as per item No.4.01 here in before but replacement of unserviceable top long rail as per drg |
| 19 | All as per item No. 4.01 here in before but replacement of unserviceable top short rail as per drg. |
| 20 | All as per item No.4.01 here in before but replacement of unserviceable stiffener complete H type as per drawing |
| 21 | M& L for French polish to table centre wooden portion exposed to direct vision complete all as specified. |
| 22 | Supply and fixing of good quality of plastic buffer |
| 23 | Teapoy wooden (FD-34 & FD-232) Supply & fixing of the following components/parts of teapoy wooden using 1st class seasoned hard wood Teak including dismantling of unserviceable components all as per specified and shown on drg.Replacement of unserviceable top made of 18/19mm thick Prelaminated Particle Board Teak Faced including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. |
| 24 | All as per item No.5.01 here in before but replacement of unserviceable leg as per drg |
| 25 | All as per item No.5.01 here in before but replacement of unserviceable top long rail as per drawing |
| 26 | All as per item No.5.01 here in before but replacement of unserviceable top short rail as per drawing. |
| 27 | All as per item No. 5.01 here in before but replacement of unserviceable stiffner complete H type as per drawing |
| 28 | M& L for French polish to teapoy wooden portion exposed to direct vision complete all as specified. |
| 29 | Supply and fixing of good quality of plastic buffer |
| 30 | Table Writing (FD-249,268&275)Supply & fixing of the following components/parts of table writing using 1st class seasoned hard wood Teak including dismantling of unserviceable components all as specified and shown in drawings. Replacement of unserviceable top made of 18/19mm thick Prelaminated Particle Board Teak Faced including hard wood (Teak) edging all around the table fixed with nails all as shown in drg and directed by Engineer-in Charge. |
| 31 | All as per ser item No 6.01 here in before but replacement of unserviceable leg as per drg |
| 32 | All as per ser item No 6.01 here in before but replacement of unserviceable top long rail as per drg |
| 33 | All as per ser item No 6.01 here in before but replacement of unserviceable stiffner as per drg |
| 34 | All as per ser item No 6.01 here in before but replacement of Shutter for table writing as per drg |
| 35 | All as per ser item No 6.01 here in before but replacement of unserviceable Complete Box including Drawer & Shutter & knobs made of 18mm thick block board with one side teak face complete all as specified. |
| 36 | M& L for French polish to table writing portion exposed to direct vision complete all as specified. |
| 37 | Supply and fixing of good quality of plastic buffer |
| 38 | Table Dining 6 Pers (FD-30,239,273)Supply & fixing of following components/parts of table dining for 6 persons using 1st class seasoned hard wood Teak including dismantling of unserviceable components all as specified and directed by Engr-in-Charge. Replacement of unserviceable top made out of 18/19mm thick Prelaminated Particle Board Teak Faced. including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. |
| 39 | All as per ser item No 7.01 here in before but replacement of unserviceable leg as per drawing |
| 40 | All as per ser item No 7.01 here in before but replacement of unserviceable top front rail as per drg. |
| 41 | All as per ser item No 7.01 here in before but replacement of unserviceable short rail as per drg. |
| 42 | Supply and fix of Teak wood triangular support with nails to strengthen table dinning. |
| 43 | M& L for Polishing with French polish to table dining for 6 persons, wooden portion exposed to direct vision |
| 44 | Supply and fixing of good quality of plastic buffer |
| 45 | Table Dining 8 Pers (FD-30,239,273)Supply & fixing of following components/parts of table dining for 8 persons using 1st class seasoned hard wood Teak including dismantling of unserviceable components all as specified and directed by Engr-in-Charge. Replacement of unserviceable top made out of 18/19mm thick Prelaminated Particle Board Teak Faced. including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. |
| 46 | All as per ser item No 8.01 here in before but replacement of unserviceable leg as per drawing. |
| 47 | All as per ser item No 8.01 here in before but replacement of top front rail as per drg. |
| 48 | All as per ser item No 8.01 here in before but replacement of short rail as per drg. |
| 49 | Supply and fix of Teak wood triangular support with nails to strengthen table dinning. |
| 50 | Polishing with french polish to table dining for 8 persons, wooden portion exposed to direct vision complete all as specified. |
| 51 | Supply and fixing of good quality of plastic buffer |
| 52 | Chair Dining (FD-16, 20,228, 279)Supply & fixing of following components/parts of chair dining using 1st class seasoned hard wood Teak including dismantling of unserviceable components all as specified and directed by Engr-in-Charge.Replacement of unserviceable front leg as per drawing |
| 53 | All as per ser item No 9.01 here in before but replacement of unserviceable rear leg as per drawing |
| 54 | All as per ser item No 9.01 here in before but replacement of unserviceable front / side/ back seat rail as per drawing. |
| 55 | All as per ser item No 9.01 here in before but replacement of unserviceable stiffener H type complete as per drawing |
| 56 | Supply and fix of Teak wood triangular support with nails to strengthen Chair Dining. |
| 57 | M& L for French polish to chair dining after replacement of parts |
| 58 | Chair Writing (FD-56M,FD-280) Supply & fixing of following components/parts of chair writing using 1st class hardwood Teak including dismantling of unserviceable components all as specified and directed Replacement of unserviceable front leg as per drg. |
| 59 | All as per ser item No 10.01 here in before but replacement of unserviceable rear leg as per drawing |
| 60 | All as per ser item No 10.01 here in before but replacement of unserviceable front/ side/ back seat rail as per drawing |
| 61 | All as per ser item No 10.01 here in before but replacement of unserviceable back rest as per drawing. |
| 62 | All as per ser item No 10.01 here in before but replacement of unserviceable stiffener H type complete as per drawing. |
| 63 | All as per ser item No 10.01 here in before but replacement of unserviceable arms as per drawing |
| 64 | M& L for French polish to chair writing after replacement of above parts complete all as specified. |
| 65 | Chair Easy (FD-17&229)Supply & fixing of following components/parts of chair easy using 1st class hard wood Teak including dismantling of unserviceable components all as specified and directed. Replacement of unserviceable front/ Rear leg as per drawing. |
| 66 | All as per ser item No 11.01 here in before butreplacement of unserviceable front / Side/ back seat rail as per drawing. |
| 67 | All as per ser item No 11.01 here in before but replacement of unserviceable arms as per drawing. |
| 68 | M& L for French polish to chair easy after replacement of above parts complete all as specified. |
| 69 | Canning (Chair Dining, Chair Writing, Chair Easy)Removing old unserviceable cane plastic from chair dinning(Drg No FD-15,20,228,279,1105) and supply and recaning with 2.0 mm wide plastic cane woven in godrej pattern with white/pale cream colour cane and perimeter work with 3.5 to 4.0 mm wide plastic cane. All as specified and shown on drg and directed by Engineer-in-Charge . |
| 70 | Supply and fixing of good quality of plastic buffer |
| 71 | All as per item 12.01 here in before but chair writing. (FD-56M,280) |
| 72 | Supply and fixing of good quality of plastic buffer |
| 73 | All as per item 12.01 here in before but chair Easy. (FD-17,229) |
| 74 | Supply and fixing of good quality of plastic buffer |
| 75 | CHAIR DINING CUSHIONED (FD/MAP II/04)Supply and fixing in replacement of unserviceable Front leg of Chair Dining MAP using 1st class seasoned hard wood Teak including dismantling of unsv components/parts complete all as specified and shown on drg as directed by Engr-in-charge |
| 76 | All as per Ser item No. 13.01 here-in-before but Rear leg |
| 77 | All as per Ser item No. 13.01 here-in-before but front/side rail. |
| 78 | All as per Ser item No. 13.01 here-in-before but back stiffener. |
| 79 | All as per Ser item No. 13.01 here-in-before but stiffener 'H' type. |
| 80 | All as per Ser item No. 13.01 here-in-before but Foam cushion 75 mm thick and 32 density duly covered with tapestry cloth of approved quality. |
| 81 | M& L for French polish to Chair Dining cushioned portion exposed to direct vision complete all as specified. |
| 82 | Supply and fixing of good quality of plastic buffer |
| 83 | Sofa set 5 seater in 3 pieces - Drg No FD/MAP-II/02, FD-373 Supply & fixing in replacement of unsv front leg made out of 1st Class Hard Wood (Teak wood) including dismantling of unsv components all as specified and shown on drg. Rest All As Directed |
| 84 | All as per Ser item No. 14.01 here-in-before but replacement of unsv Rear legs as per drg. |
| 85 | All as per Ser item No. 14.01 here-in-before but replacement of unsv long Rail as per drg. |
| 86 | All as per Ser item No. 14.01 here-in-before but replacement of unsv Short Rail as per drg. |
| 87 | All as per Ser item No. 14.01 here-in-before but replacement of unsv Stiffner as per drg. |
| 88 | All as per Ser item No. 14.01 here-in-before but replacement of unsv Back Frame as per drg. |
| 89 | All as per Ser item No. 14.01 here-in-before but replacement of unsv Back ply/seat ply as per drg. |
| 90 | All as per Ser item No. 14.01 here-in-before but replacement of unsv Arm as per drg. |
| 91 | M&L for Polishing on complete surface of Sofa Set 5 Seater 3 Pcs on wooden portion to direct vision after replacement of above parts/ components. |
| 92 | CUSHION & COVER FOR SOFA Supply new foam cushion of sofa set of 4/5 seated 550x525x100mm 40 density covered with cloth of approved quality. FD/MAP-II/02,FD-373 |
| 93 | STOOL DRESSING CUSHIONSupply new foam cushion stool dressing cushion 32 density covered with cloth of approved quality FD/E6/MAP/14, |
| 94 | Bin Multi Purpose (FD/E6/MAP/09)Supply & fixing of the following components/parts of side board including dismantling of unserviceable components all as specified and shown in drawings. Replacement of unserviceable top/ Bottom made of 19mm thick Prelaminated Particle Board including hard wood (Teak) edging all around the table fixed with nails all as shown in drg and directed by Engineer-in Charge. |
| 95 | All as per ser item No 17.01 here in before but replacement of shutter both side left/right made of prelaminated particle board Teak face with 4 mm Teak wood beading as per drg. |
| 96 | All as per ser item No 17.01 here in before but replacement of unserviceable drawer with knobs as per drg. |
| 97 | All as per ser item No 17.01 here in before but replacement of unserviceable back ply wood 6 mm thick BWR grade as per drg |
| 98 | All as per ser item No 17.01 here in before but replacement of unserviceable matalic knob/handle as per drg. |
| 99 | M& L for French polish to side board portion exposed to direct vision after replacement of above component/part |
| 100 | Side Board (FD-241,371,372,1112)Supply & fixing of the following components/parts of side board including dismantling of unserviceable components all as specified and shown in drawings. Replacement of unserviceable top/ Bottom made of 19mm thick Prelaminated Particle Board including hard wood (Teak) edging all around the table fixed with nails all as shown in drg and directed by Engineer-in Charge. |
| 101 | All as per ser item No 18.01 here in before but replacement of shutter both side left/right made of prelaminated particle board Teak face with 4 mm Teak wood beading as per drg. |
| 102 | All as per ser item No 18.01 here in before but replacement of unserviceable drawer with knobs as per drg. |
| 103 | All as per ser item No 18.01 here in before but replacement of unserviceable back ply wood 6 mm thick BWR grade as per drg |
| 104 | All as per ser item No 18.01 here in before but replacement of unserviceable matalic knob/handle as per drg. |
| 105 | M& L for French polish to side board portion exposed to direct vision after replacement of above component/part |
| 106 | Hat Stand With Mirror (FD-233,361&362)Supply & fixing of the following components/parts of Hat stand with mirror, including dismantling of unserviceable components all as specified and shown on drg. replacement of unserviceable Aluminium hookes of size 120x75mm as per drg. |
| 107 | All as per item No. 19.01 here in before but replacement of unserviceable looking mirror of hat stand as per drg. |
| 108 | M& L for French polish to hat standing with mirror portion exposed to direct vision after replacement of above components |
| 109 | Peg Table (FD-25,26,236,277&384)Supply & fixing of the following components/parts of peg table using 1st class seasoned hard wood Teak, including dismantling of unserviceable components all as specified and shown on drg. Replacement of unserviceable top of peg table made from 18/19mm thick Prelaminated Particle Board Teak Faced. including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. and directed by Engineer-in Charge. |
| 110 | All as per item No 20.01 here in before but replacement of unserviceable leg as per drg |
| 111 | All as per item No.20.01 here in before but replacement of unserviceable top long rail as per drg |
| 112 | All as per item No.20.01 here in before but replacement of unserviceable top side rail as per drg. |
| 113 | M& L for French polish to peg table wooden portion exposed to direct vision complete all as specified. |
| 114 | Supply and fixing of good quality of plastic buffer |
| 115 | TABLE DINING 4 PERS (FD-273)Supply & fixing in replacement of unsv top made out of 18/19mm thick Prelaminated Particle Board Teak Faced. including hard wood (Teak) edging all around the table fixed with nails all as shown in drg. |
| 116 | All as per Ser item No. 21.01 here-in-before but replacement of unsv legs as per drg. |
| 117 | All as per Ser item No.21.01 here-in-before but replacement of unsv top front rail as per drg. |
| 118 | All as per Ser item No.21.01 here-in-before but replacement of unsv short rail as per drg. |
| 119 | Supply and fix of Teak wood triangular support with nails to strengthen table dinning. |
| 120 | M&L for Polishing on complete surface of table dinning for 4 person on wooden portion to direct vision after replacement of above parts/ components.. |
| 121 | Supply and fixing of good quality of plastic buffer |
| 122 | Chair Writing FD-1107 Supply and fixing of seat and back cushion for chair writing 32 density covered with cloth of approved quality. |
| 123 | M&L for Polishing on complete surface of chair writing on wooden portion to direct vision after replacement of above parts/components. Please Enable Macros to View BoQ information |