|
| 1 | Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level |
| 2 | Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L' Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look. (M-0689 SOR 25-26 Pg No:116) |
| 3 | Supply and installation of Acoustical Fibre Based Wall Panelling of strand colour, kerfed edge magnesite bonded pine wood fibre core tiles of size 600 x 2400 x 20mm, density 400 kgs / m3, weight 8 kg / m2 installed by using GI strut frame work system with non-visible fasteners usin PVC strut H-Spline. The GI strut frame work systems includes GI strut CC 50 cross channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centre to centre. PVC strut H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 cross channel at 600mm centers. The kerfed edge panels shall be then inserted into the strut H-Spline along their long edges of 2400mm against frame work to perfect fit with staggered short edges. The system is backlined with the acoustical infill Synthetic Polyfiber 500 gsm 50mm thick. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department officers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specication. |
| 4 | Supplying and Fixing of 75mm thk. PLYWOOD PARTITION WITH LAMINATE FINISHED, Providing and fixing ply wood Partition till bottom of roof/Beam using 12mm thk commercial ply wood partition finished with 1mm thk. laminate (Merino or equivalent make) on both side, with 50 x 50mm Aluminium box section as suppots at 600 x 600mm c/c as per detail drawing. All ply woods (Century/Greenply or equivalent make) used for construction should be coated with anti termite coating.Cost of the partition to include for glass wool Insulation 48Kg/m2 density infill for the complete area of the partition. Installation of the glass wool shall be protected with Tissue covering taped to the frame or plastic sheet taped to the frame on one side. Cost of the partition shall be inclusive of necessary cut-outs for electrical / data and other service outlets. Cost to include applying fire and acoustical sealants at periphery of partitions & cut outs of services from both sides as per manufactures specifications. |
| 5 | Supply and fixing of 19W LED Round Recessed type fitting on false Ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 6 | Supply and fixing of 30W 2x2 LED square Recessed type fitting with suitable frame on false Ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 7 | Supply and installation of 1.50 TR 4 Way Cassette Inverter |
| 8 | Modular Table top for the work station with 25mm thick particle board (synthetic resin bonded flat pressed three layer graded particel board) of regular grade conforming to IS 3087 laminated with edge bonded finish at front edge and the same will be mounted on work station partitions fixed with MS powder coated cantilever brackets of sufficent thickness not less than 2mm to withstand the weight of table top of approved color and quality etc., complete. |
| 9 | WORKSTATION CHAIRS. AURA - Medium Back •Sturdy 50mm G.F Nylon dual- wheel Castors , •Glass Filled Nylon Base ,•Class 4 Gas lift as per DIN Standards 4550: 2004-12 , •Single Position Locking Synchro Mechanism , •Height Adjustable 2D PU Armrest, •Glass Filled Nylon Backrest with Mesh , •Seat Upholstered with PU Foam & Fabric , • Height Adjustable Lumbar Support. |
| 10 | Visitor Model Meshback Chair S type Fixed Handle |
| 11 | Main & Side table Specifications: Top panel: 25mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping LEG : Slant or Straight leg 40*40mm size tube, tube thickness 1.6mm with powder coating finised. SUPPORT BEAMS : 40*40mm ms tube with 1.6mm thickness and with ms powder cioating finished. MODESTY : 1.2mm Thk ms modesty panel with powder coating finished in 400mm height. Flip cover 400mm PLB SIDE & BACK STORAGE UNIT Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 6mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping FASCIA: 18mm Thk pre laminated particle board Handle: I shape handle Lock: Key lock |
| 12 | Main Chair Imported Half Leather Chair Fixed handle,Synchro Tilting Mechanism,Imported Gaslift,Chrome base,Heavy |
| 13 | BOARD ROOM CHAIRSWEBSTAR - Medium Back with Adjustable Handle & softpad with Chrome Base,Heavy Wheel, Synchro Tilting Mechanism,Molded Foam & Fabric |
| 14 | Fabric seater with cushion and with wooden legs |
| 15 | Supplying of L Type Sofa |
| 16 | Supplying of 3 Seater sofa |
| 17 | Supply and installation of Counter for Pantry and Cafeteria, The storage of countertop to be made of 19mm BWR ply with necessary. The storages to be with shelves, made of 19mm thick BWR ply with swing shutters with all necessary accessories like concealed auto closing SS hinges, |
| 18 | Modular U-Shaped Conference Table with a central open core. Size 2 x 6.00m x 0.90m x 0.75m and Size 1.60m x 0.90m x 0.75m.Seating Capacity: Comfortably accommodates 24 participants. High-density, commercial-grade MDF with a Scratch-resistant Melamine / Natural Wood Veneer finish. Finished with heavy-duty 2mm impact-resistant PVC edging. Heavy-gauge Powder-coated steel legs / Matching wooden panel legs featuring adjustable levelers for uneven flooring with necessary Connectivity & Cable Management Power & Data Access. Box Outlets: Each box contains 2x Universal Power, 1x HDMI, 1x RJ45, 2x USB-A/C ports.Wire Routing: Equipped with under-desk horizontal wire trays and vertical cable spines to completely conceal wiring. |
| 19 | Supplying of Conference Table along with Mic arrangements with 20mm BWR Ply of Size 4.75m x 0.90m x 0.75m |
| 20 | Supply and fixing of Tambaram TCMC & Tamilnadu Logo - 1.5 ft logo including cost of material, labour, lead, lift etc., |
| 21 | Supply and fixing of Tambaram TCMC Logo - 4 ft logo including cost of material, labour, lead, lift etc., ` Please Enable Macros to View BoQ information |