|
| 1 | Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level (M-0618 SOR 25-26 Pg No:97) |
| 2 | Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre 'T'. The 'T' shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of 'T' section of size 30mm x 24mm powder coated at bottom at intervals with powder coating at bottom. Necessary provision of inter locking of 'T' section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile 'L' Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look. (M-0689 SOR 25-26 Pg No:116) |
| 3 | Supply and installation of Acoustical Fibre Based Wall Panelling of strand colour, kerfed edge magnesite bonded pine wood fibre core tiles of size 600 x 2400 x 20mm, density 400 kgs / m3, weight 8 kg / m2 installed by using GI strut frame work system with non-visible fasteners usin PVC strut H-Spline. The GI strut frame work systems includes GI strut CC 50 cross channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centre to centre. PVC strut H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 cross channel at 600mm centers. The kerfed edge panels shall be then inserted into the strut H-Spline along their long edges of 2400mm against frame work to perfect fit with staggered short edges. The system is backlined with the acoustical infill Synthetic Polyfiber 500 gsm 50mm thick. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department officers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specication. |
| 4 | Providing and fixing 12 mm thick frameless toughened glass shutter of approved brand and manufacture, including providing and sliding type with all accessories or fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement, Locking arrangements, SS Handle. And making necessary holes etc., for fixing required door fittings, all complete as per direction of Engineer-incharge. |
| 5 | Supply and fixing of 19W LED Round Recessed type fitting on false Ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 6 | Supply and fixing of 30W 2x2 LED square Recessed type fitting with suitable frame on false Ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 7 | Supply and installation of 1.50 TR 4 Way Cassette Inverter |
| 8 | Workstation Area - Linear Workstation - Sharing Size : 1200x 600 x750Ht Table Top is made up of 25mm thick PLPB Table Top with 2mm PVC Edge Banding . Understructure : MS Powdercoated Legs 40 x 40 Slant legs.Wire Management : Grommet Hole -65mmDia250mm ( Ht ) Raceway below the table top Main Screen : 18mm Thick & 300mm(ht) fabric magnetic privacy with rubber beading.CENTER T LEG : MS 40X40 MS 40X40 Square leg with CRCA Pipe of 1.6mm thickness of 60 microns Powder coated leg for Table top Stability.Passage side modesty : MS powder coted 450mm(ht) |
| 9 | WORKSTATION CHAIRS. AURA - Medium Back •Sturdy 50mm G.F Nylon dual- wheel Castors , •Glass Filled Nylon Base ,•Class 4 Gas lift as per DIN Standards 4550: 2004-12 , •Single Position Locking Synchro Mechanism , •Height Adjustable 2D PU Armrest, •Glass Filled Nylon Backrest with Mesh , •Seat Upholstered with PU Foam & Fabric , • Height Adjustable Lumbar Support. |
| 10 | Visitor Model Meshback Chair S type Fixed Handle |
| 11 | Main & Side table Specifications: Top panel: 25mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping LEG : Slant or Straight leg 40*40mm size tube, tube thickness 1.6mm with powder coating finised. SUPPORT BEAMS : 40*40mm ms tube with 1.6mm thickness and with ms powder cioating finished. MODESTY : 1.2mm Thk ms modesty panel with powder coating finished in 400mm height. Flip cover 400mm PLB SIDE & BACK STORAGE UNIT Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 6mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping FASCIA: 18mm Thk pre laminated particle board Handle: I shape handle Lock: Key lock |
| 12 | Main Chair Imported Half Leather Chair Fixed handle,Synchro Tilting Mechanism,Imported Gaslift,Chrome base,Heavy |
| 13 | Supply and fixing of Tambaram TCMC & Tamilnadu Logo - 1.5 ft logo including cost of material, labour, lead, lift etc., |
| 14 | Supply and fixing of Tambaram TCMC Logo - 4.00 ft logo including cost of material, labour, lead, lift etc., ` Please Enable Macros to View BoQ information |
