|
| 1 | Supply, Installation testing and commissioning of ups and inverter |
| 2 | 1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group B |
| 3 | 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 4 | 1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 5 | 1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 6 | 1.56:Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 7 | 90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator |
| 8 | 1.27.3:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) |
| 9 | 90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket |
| 10 | 1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 11 | 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. |
| 12 | OD52508/2026-2027:Supply , installation testing and commissioning of Tubular 12V 150AH Tower typetubularbattery 3 years warranty |
| 13 | OD52509/2026-2027: Supply ,installation testing and commissioning of InverterBrand: HykonModel Name: SP PLUS 3750/48VCapacity:3kva InverterInput voltage range (normal mode) =90v- 270vac Voltage range (UPS mode)=195-260vacOutput frequency=50Hz +/- 0.5HzFrequency: 50Hz +/-5HzOutput put voltage: 220V +/- 10%Protection=Over load protection, Short Ciircuit protection, Battery lowWarranty: 3 yearCertification:BIS, ISO, ROHS, OHSAS &CE |
| 14 | OD52604/2026-2027:Supply Installation and testing and commissioning of 6 KVA Online UPSBrand : HykonModel: AEB 6000/120VCapacity:6 kva Online UPSInput voltage range :170-270VACFreaquency: 45Hz-55HzOutput voltage:230VOutput frequency=50HzWave form=Pure SinewaveProtections: Advanced Electronic protection for device safety backed up withMCB”s/MCCB”s & fast acting fuses, high speed pulse to pulse electronic deviceprotection over voltage/under voltage protection, Electronic over current tripManual Bypass providedInbuilt Isolation Transformer providedWarranty: 3 yearCertification:BIS, ISO, ROHS, OHSAS &CE Approved make :Luminous/APC/Hykon or Equivalent make |
| 15 | 19.1:Supply, installation, testing and commissioning of 1200 mm sweep BEE-5 star rated ceiling fan with brushless direct current motor (BLDC) , class of insulation B , 3 no:s blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM (tolerance as per IS :374-2019, THD less than 10% remote or electronic regulator unit for speed control and all remaining accesories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg celsius ( maximum) , insulation resistance more than 2 Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as required: |
| 16 | OD58829/2026-2027:Supply and fitting cast alluminium stove enamelled elliptical shape bulk head fitting withporcelane holder and meshguard with front clear glass and 9/10W LED lamp, to wall includinggiving connections using 16/0.20 mm PVC insulated and sheathed 3 core round copperconductor etc. |
| 17 | OD58843/2026-2027:Supplying and fixing 10 W LED Bulb including connection etc. as required |
| 18 | 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture Please Enable Macros to View BoQ information |
