Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M & L for Cleaning of 100 KLD RCC Semi Underground Aeration Tank size 3.00m x 3.00m x 2.00m along with Fine Bar Screen Chamber, Grit Chamber and connected system by blocking the Inlet / Outlet flow from Manholes, Lifting the excess Semi-Solid Sewage Water out of the Sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush [to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank] , and removing the same to a distance not exceeding 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as specified and as directed. |
| 2 | M & L for Cleaning of 100 KLD RCC Underground Sump of diameter 4.00 metre and Depth 2.10 metre along with connected system by blocking the Inlet / Outlet Flow Lines, lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush [to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank] , and removing the same to a distance not exceeding 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as specified and as directed. |
| 3 | M & L for Cleaning of 100 KLD RCC Sludge Drying Beds having 4 Nos bed of size 5.00 m x 1.50 m x 1.00m along with connected system by blocking the inlet / outlet flow lines, lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush [to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank] , and removing the same at a distance not exceeding 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as specified and as directed. |
| 4 | M & L for Cleaning of 100 KLD RCC Equalization Tank of size 5.00 m x 4.00 m x 2.00 m [Inner dimension] along with Fine Bar Screen Chamber, Grit Chamber and connected system by blocking the Inlet / Outlet flow from manholes, lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush [to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank] , and removing the same at a distance not exceeding 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as specified and as directed. |
| 5 | M & L for Cleaning of 100 KLD RCC FMR [Fluidised Media Reactor] with Tube Setter / Lamella Setter Tank [MBBR and Tertiary system] of size 10.50 m x 3.20 m x 3.00 m [Inner Dimension] and lifting the excess semi-solid sewage water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush [to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank] , and removing the same at a distance not exceeding 50m from site where directed, opening the blocked manholes etc before normalising flow of sewer complete all as specified and as directed. |
| 6 | M & L for Cleaning of 100 KLD RCC Treated Tank of size 8.00 m x 5.00 m x 2.00 m [Inner dimension] along with Fine Bar Screen Chamber, Grit Chamber and connected system lifting the excess semi-solid impurities in water out of the sump, removing the entire deposited sludge, mud, silt etc, scrapping the internal wall / floor with wire brush [to remove deposited scales, mud etc from the walls / floors by using suitable tools and plants, manually from the bottom of the tank] , and removing the same at a distance not exceeding 50m from site where directed, opening the blocked manholes etc before normalising flow of treated water complete all as directed |
| 7 | S & F in repairs MCB, TPN, 32 Amps, 10 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed. |
| 8 | S & F in repairs MCCB, FP, 250 Amps, 25 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed. |
| 9 | S & F in repairs DOL Starter, in sheet steel enclosure type MU-G6, 415 Volts, 3 Phase, 50 Hz suitable up to 3 HP Submersible Pump and relay ranging from 9 Amps to 14 Amps complete with Single Phase Preventer including replacing defective wiring with copper wire, lugs etc. complete all as specified and as directed. Make: BCH / Siemens / L & T / ABB / Schneider / C & S |
| 10 | S & F in repairs DOL Starter, in sheet steel enclosure type MU-G6, 415 Volts, 3 Phase, 50 Hz suitable up to 5 HP Submersible Pump and relay ranging from 12 Amps to 16 Amps complete with Single Phase Preventer including replacing defective wiring with copper wire, lugs etc. complete all as specified and as directed. Make: BCH / Siemens / L & T / ABB / Schneider / C & S |
| 11 | S & F in repairs FASD Starter, in sheet steel enclosure type MU-G15, 415 Volts, 3 Phase, 50 Hz suitable up to 10HP Submersible pump and relay ranging from 13 Amps to 22 Amps complete with Single Phase Preventer including replacing defective wiring with copper wire, lugs etc. complete all as specified and as directed. Make: BCH / Siemens / L & T / ABB / Schneider / C & S |
| 12 | Disconnecting of electric connection, taking out Slow Speed Centrifugal Motor of 5 HP [Make – Kirloskar] from sewage aerator, transporting to workshop rewinding of the motor with suitable gauge of super enamelled insulated copper wire, reassembling the motor, transporting up to site, re-installation and testing of the assembly as directed including replacement of DE/NDE bearings - 02 Nos complete all as specified and as directed. |
| 13 | Servicing and lubrication of Slow Speed Aeration Mechanism fixed with surface 5 HP Motor [55 to 70 RPM] Aerator motor's Gear system with MS Drift Tube of vertically flange mounted planetary geared motor of ratio [24:1] with 1450 RPM of motor speed and painting with two coat of synthetic enamel paint complete all as specified and as directed. Note: Spares will be measured and paid separately as supply only under relevant items of this Schedule. The Spares shall be of make as per existing / OEM and as approved. |
| 14 | Supply only 3.5 m Long Shaft |
| 15 | Supply only Rubber Coupling |
| 16 | Supply only V- Belt |
| 17 | Disconnecting of electric connection, taking out Horizontal Centrifugal Type Non-Clogging Self-Priming Pumps [Make – Kirloskar] of capacity 3 HP from Sewage Treatment Plant transporting to workshop rewinding of the motor with suitable gauge of super enamelled insulated copper wire, reassembling the motor, transporting up to site, re-installation and testing of the assembly complete all as specified and as directed. Note: Spares will be measured and paid separately as supply only under relevant items of this Schedule. The Spares shall be of make as per existing / OEM and as approved. |
| 18 | Supply only Rubber Couplings |
| 19 | Supply only Cast Iron Impeller |
| 20 | Supply only SS Shaft |
| 21 | Supply only Mechanical Seal |
| 22 | Disconnecting of electric connection, taking out Horizontal Centrifugal Type Non-Clogging Self-Priming Pumps [Make – Kirloskar] of capacity 5 HP to 10 HP from Sewage Treatment Plant / Swimming Pool / RO Plant and transporting to workshop rewinding of the motor with suitable gauge of super enamelled insulated copper wire, reassembling the motor, transporting up to site, re-installation and testing of the assembly complete all as specified and as directed. Note: Spares will be measured and paid separately as supply only under relevant items of this Schedule. The Spares shall be of make as per existing / OEM and as approved. |
| 23 | Supply only DE/NDE Bearings |
| 24 | Supply only Rubber Couplings |
| 25 | Supply only Cast Iron Impeller |
| 26 | Supply only SS Shaft |
| 27 | Supply only Mechanical Seal |
| 28 | Supply only Head Cover |
| 29 | Supply only Pump Casing |
| 30 | Supply only Base Frame |
| 31 | M & L for preparation of External and Internal Surfaces of LT Panels Indoor / Outdoor type by scraping down old rusted paint by steel brush, brooming, rubbing and cleaning thoroughly and Spray Painting Two Coats of Synthetic Enamel Paint of approved Colour over a Coat of Zinc Chrome Primer after filling cavities with filler etc. including taking out connections and reconnecting complete all as specified and as directed. |
| 32 | S & F in repair Motor Protection Thermal Over Relay, range from 8 to 44 Amps, suitable for Aux supply 240 Volts complete all as specified and as directed. |
| 33 | S & F in repairs and Testing Digital Ampere Meters of Range 0 – 500 Amps with inbuilt Selector Switch, Accuracy Class – 1, Flush Pattern, Square Type, 415 Volts including wiring complete all as specified and as directed. Make: Havells / L & T / AE / Schneider / BCH |
| 34 | S & F in repairs and Testing Digital Volt Meters of Range 0 – 500 Volts with inbuilt Selector Switch, Accuracy Class – 1, Flush Pattern, Square Type,415 Volts including wiring complete all as specified and as directed. Make: Havells / L & T / AE / Schneider / BCH |
| 35 | S & F in repairs LED Indicating Lamp RYB [Red, Yellow & Blue Set of Three] 415 Volts complete all as specified and as directed. |
| 36 | S & F in repairs Voltage Meter Selector Switch, 3 Phase, 415 Volts complete all as specified and as directed. Make: C & S [SPVSS10] or equivalent in BCH / Siemens / L & T / ABB / Schneider |
| 37 | S & F in repairs Electronic Timer of type ST-100, suitable for 9 – 30 Seconds, 240 V / 415 V complete all as specified and as directed. Make: Make: BCH / Siemens / L & T / ABB / Schneider / C & S |
| 38 | S & F in repairs Current Transformer of Ratio 30/5 complete all as specified and as directed. |
| 39 | S & F in repairs Three Pole Power Contactor of type MNX 40 suitable for 415 Volts 63 Amps, 3 Way, 4 Poles complete all as specified and as directed. Make: L & T Cat No. CS 94190 or equivalent in BCH / Siemens / ABB / Schneider / C & S |
| 40 | S & F in repairs Rotary Switch [ON-OFF], suitable for 415 V, 63 Amps, 3 Way, 4 Pole, complete all as specified and as directed. Make: BCH / Siemens / L & T / ABB / Schneider / C & S |
| 41 | S & F in repairs of Single Phase Preventer, Auto Reset Relay, 40 Volts unbalance Make: Minilec Cat No. VSP-3 or equivalent complete all as specified and as directed. |
| 42 | Supply and laying 2 mm thick LT Synthetic Mat of size 2.00 m X 1.00 m, ISI Marked, placed at Electric Installations complete all as specified and as directed. |
| 43 | M & L for Painting to Pump and Motor of capacity 1 HP with Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer [using Spray Gun] including cleaning and degreasing the surface, complete removal of old, loose and deteriorated paint from surfaces of pump set including dismantling of removable Guards / Covers as required for proper surface treatment, cleaning, scraping, rubbing with emery paper, removal of rust, oil, grease, dirt and other foreign materials from all exposed metallic surfaces, and preparing the surfaces smooth and ready for painting, proper drying between coats, finishing to smooth and uniform appearance, and marking of SM No. / MES No. / Details of Pump Set with approved Paint & Stencil, re-fixing all removed components, protection of nearby Electrical / Mechanical parts during painting, complete all as specified and as directed. |
| 44 | All as per Serial Item No. 43 above but for Pump and Motor of 3 HP Capacity complete all as specified and as directed. |
| 45 | All as per Serial Item No. 43 above but for Pump and Motor of 5 HP Capacity complete all as specified and as directed. |
| 46 | All as per Serial Item No. 43 above but for Pump and Motor of 7.5 HP Capacity complete all as specified and as directed. |
| 47 | All as per Serial Item No. 43 above but for Pump and Motor of 10 HP Capacity complete all as specified and as directed. |
| 48 | S & F Stainless Steel Impeller suitable for Non-Clogging type Sewage Pump Set of capacity 10 HP of Make Kirloskar including taking down Defective / Unserviceable Impeller, dismantling of Pump Assembly, cleaning of Shaft, Housing and Associated Components, checking alignment and wear of Shaft Sleeve / Key Arrangement, fixing New SS Impeller complete with necessary Locking Arrangement, Nuts, Bolts, Keys, Washers and Sealing Materials as required, re-assembling of Pump, Coupling Alignment, Testing, Trial Run and commissioning for satisfactory performance of Pump Set complete all as specified and as directed. |
| 49 | All as per Serial Item No. 48 above but for Pump of 7.5 HP Capacity complete all as specified and as directed. |
| 50 | All as per Serial Item No. 48 above but for Pump of 5 HP Capacity complete all as specified and as directed. |
| 51 | All as per Serial Item No. 48 above but for Pump of 3 HP Capacity complete all as specified and as directed. |
| 52 | S & F in repairs Mechanical Lower and Upper Seal suitable for 5 HP Capacity Sewage Submersible Pump Sets Non-Clog type and filling New Cooling Oil complete all as specified and as directed. Make: MBH, Model No. MBHN-5-15 |
| 53 | Testing of Inlet and Outlet Water Samples for all parameters as per Environmental Protection Act for Effluent discharge into inlet surface water form Govt recognised or approved Institute / Test Labs and submit the test report complete all as specified and as directed. [Note: Testing of One Sample each for Inlet and Outlet shall be considered as One Job. Testing shall be carried out once in a month at regular interval] |
| 54 | M & L for Repairs / Replacement of Pressure Filter Media of Filter Bed of size 3.00 metre Dia, 1.50 metre Height by Opening the Manhole and taking out carefully existing Filter Media of any size, stacking neatly after thorough cleaning and segregating the Media of Round Pebbles and Coarse Gravels for reuse from vertical size pressure and Cleaning of internal walls of Pressure Filter with Bleaching Powder solution by using wire brush and applying two coats of synthetic bitumen paint complete all as specified and as directed. Note: Filling/Spreading only Filter Media will be measured and paid separately. |
| 55 | Spreading only the Filter Media [Pebbles] obtained from Serial Item No. 55 above on the Lower Portion of the Filter Bed complete all as specified and as directed. |
| 56 | Spreading only Filter Media [Coarse Gravels] obtained from Serial Item No. 55 above complete all as specified and as directed. |
| 57 | Supply and laying Filter Media Pebbles naturally obtained from the River Bed of size 5mm to 20 mm complete all as specified and as directed. |
| 58 | Supply and laying Filter Media Coarse Gravels of size 1.00 mm and Fine Gravel of size 0.5mm complete all as specified and as directed. |
| 59 | Supply and laying Filter Media 14/30 Mesh Sand [Fine Sand] in layers up to 600 mm thick complete all as specified and as directed. |
| 60 | M & L for opening Top Cover of Activated Carbon Filter and replacement of Activated Carbon with New / Fresh Activated Carbon of 200 KG, levelling including internal cleaning of Filter Vessel, Strainers and Nozzles, replacement of Gasket/Sealing Material as required and reassembling the Top Cover of Activated Carbon Filter without disturbance of system checking for leakage, backwashing, testing and commissioning complete all as specified and as directed. |
| 61 | S & F in repair Add on Auxiliary Contactor Block 2NO + 2NC including necessary Electrical Connections including taking down existing contact block complete all as specified and as directed. Make: L & T, Cat No. CS94114 or equivalent in BCH / Siemens / ABB / Schneider / C & S |
| 62 | S & F in repairs Add on Auxiliary Contactor Block 1NO + 1NC including necessary Electrical Connections complete all as specified and as directed. Make: L & T Cat No. CS94118 or equivalent in BCH / Siemens / ABB / Schneider / C & S |
| 63 | Taking down Horizontal Non-Clogging type Monoblock Pump Set of Capacity 10 HP from Sewage Sump after disconnecting Electric Connection, Cleaning, Reassembling, Re-installation, refilling Cooling Oil as required and testing of the pump set including replacement of 01 Set of \\"O” Ring and 2 Nos of Bearings complete all as specified and as directed. |
| 64 | Taking down Horizontal type Pump Motor Set of Capacity 7.5 HP from the Base after disconnecting Electric Connection, Cleaning, Reassembling, re-installation, refilling Cooling Oil as required and testing of the pump set including replacement of 01 Set of \\"O” Ring and 2 Nos of Bearings complete all as specified and as directed. |
| 65 | Taking down Vertical Non-Clogging type Monoblock Pump Set of Capacity 5.0 HP from Sewage Sump after disconnecting Electric Connection, Cleaning, Reassembling, Re-installation, refilling Cooling Oil as required and testing of the Pump Set including replacement of 01 Set of \\"O” Ring and 2 Nos of Bearings complete all as specified and as directed. |
| 66 | M & L for Repairs to Non-Clogging type Mono Block Pump Set of Capacity 7.5 HP of Make Kirloskar from Sewage Sump with connected pipes after disconnecting Electric Connection, Cleaning, Washing complete Pump Set, transporting to workshop for repair including dismantling of the Pump Set, Rewinding of the Motor with suitable Gauge of Super Enamelled Insulated Copper Wire, Varnishing, Drying, Heating, Reassembling the Pump Set, refilling Cooling Oil, transporting back to site, re-installation including and testing of the Pump Set as required and testing of the pump set including replacement of 01 Set of \\"O” Ring and 2 Nos of Bearings complete all as specified and as directed. |
| 67 | M & L for Repairs to Electric Driven Vertical Non Clogging type Monoblock Pump set of Capacity 5.0 HP of Make Kirloskar from Sewage Sump with connected pipes, after disconnecting Electric Connection, transporting to workshop for repair including servicing of Pump Set and Motor, Re-Winding of the Motor with suitable gauge of Super Enamelled Insulated Copper Wire, Varnishing, Drying, Heating including Greasing, Oiling Reassembling, transporting back to site, re-installation including and testing of the Pump Set as required and testing of the pump set including replacement of 01 Set of \\"O” Ring and 2 Nos of Bearings complete all as specified and as directed. |
| 68 | M & L for Repairs to Electric Driven Vertical Non Clogging type Monoblock Pump Set of Capacity 3.0 HP of Make Kirloskar from Sewage Sump with connected pipes, after disconnecting Electric Connection, transporting to workshop for repair including servicing of Pump Set and Motor, Re-Winding of the Motor with suitable gauge of Super Enamelled Insulated Copper Wire, Varnishing, Drying, Heating including Greasing, Oiling Reassembling, transporting back to site, re-installation including and testing of the Pump Set as required and testing of the pump set including replacement of 01 Set of \\"O” Ring and 2 Nos of Bearings complete all as specified and as directed. |
| 69 | S & F in repairs, Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed. |
| 70 | S & F in repairs, Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 40 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed. |
| 71 | S & F in repairs, Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS, ISI Marked complete all specified and as directed. |
| 72 | Taking up / down Cast Iron Pipes / Water Mains of 80 mm dia [including all fittings] with Spigot and Socket Ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Necessary earthwork excavation as required will be measured and paid separately under respective items of this BoQ. Taking up Valves of different types shall also be measured and paid separately under respective items of this BoQ. |
| 73 | Taking up / down Cast Iron Pipes / Water Mains of 100 mm dia [including all fittings] with Spigot and Socket Ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Necessary earthwork excavation as required will be measured and paid separately under respective items of this BoQ. Taking up Valves of different types shall also be measured and paid separately under respective items of this BoQ. |
| 74 | Supplying and laying 80 mm bore Cast Iron Pressure Pipes, Centrifugally Cast, Heavy Duty, Class \\"A\\" with Spigot and Socket ends conforming to IS - 1536 in standard lengths suitable for Push-On Rubber Gasket Jointing laid in trenches or fixed to walls / columns complete all as specified and as directed. |
| 75 | Supplying and laying 100 mm bore Cast Iron Pressure Pipes, Centrifugally Cast, Heavy Duty, Class \\"A\\" with Spigot and Socket ends conforming to IS - 1536 in standard lengths suitable for Push-On Rubber Gasket Jointing laid in trenches or fixed to walls / columns complete all as specified and as directed. |
| 76 | Supplying, fixing and testing of Cast Iron, Heavy Duty, Specials of any Size, Radius and length conforming to IS – 1538, Part – I to XXIII: 1976 such as Bends [any type, Radius and Angle], Tapers any type [Straight, Bend, Increasing, Decreasing or Double Socket etc.], Sockets, Tail Pieces, Connecting Pieces, Tee Pieces, Single Branch, \\"Y\\" Junction, Double Branch, Cross, [all Sockets or Socket and Spigot], Collars, Caps and Plugs, Adopters etc. suitable for CI Spigot and Socket Pressure Pipes complete al as specified and as directed. |
| 77 | S & F in repair 100 mm bore CI Butterfly Valve, BS 5155, Class PN-1.6, Flanged and Drilled, Gear Operated with necessary Rubber Gaskets, Nuts and Bolts and Washers of suitable size including taking down existing valve complete all as specified and as directed. |
| 78 | S & F in repair 80 mm bore CI Butterfly Valve, BS 5155, Class PN-1.6, Flanged and Drilled, Lever Operated with necessary Rubber Gaskets, Nuts and Bolts and Washers of suitable size including taking down existing valve complete all as specified and as directed. |
| 79 | S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 80 mm Dia, confirming to IS – 14846, Class PN –1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer including taking down existing Sluice Valve of any description complete all as specified and as directed. |
| 80 | S & F Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, 100 mm Dia, confirming to IS – 14846, Class PN –1.6, Non Rising Type, Long Body type including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer including taking down existing Sluice Valve of any description complete all as specified and as directed. |
| 81 | Supply only Pool TCC 90 to increase Chlorine Level in Pool Water 2 PPM – 4 PPM complete all as specified and as directed. |
| 82 | S & F in repairs MCB, TPN, 63 Amps, 10 KA, 415 Volts, 50 Hz, suitable for fixing on N3 Frame complete all as specified and as directed. |
| 83 | Supply only Sodium Hypochlorite Solution, with available Chlorine Percent by Mass by Volume [as Cl] 10%, in Packages of 35 KG. / 50 KG / 100 KG in Plastic Recycled Jars with Test Report from an Approved Laboratory / Study Centre of any IITs / NITs / State University established or incorporated by a Provincial Act or by a State Act complete all as specified and as directed. Note: The OEM of the Chemical shall possess and submit valid Certificates such as FSSAI, ISO 9001, ISO 14001, ISO 45001 along with Chemical. Make: Declibac Technologies or equivalent as approved by the GE. |
| 84 | S & F 25 mm bore CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 85 | S & F 40 mm bore CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 86 | S & F 50 mm bore CPVC Pipes SDR 11 & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 87 | S & F HDPE Pipe 100mm dia, PN 10 suitable for Water Supply Application, including all Fittings, jointing by Butt Fusion / Electrofusion Method, Cutting, Lowering, Laying, Clamping, Testing for Leakage, Testing and Commissioning complete including taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 88 | S & F in repairs Self-Reinforced PVC 50mm dia Helifier Hoos in Suction Sweeper Pump at Sea Survival Unit complete all as specified and as directed. |
| 89 | S & F in repairs Self-Reinforced PVC 110mm dia Helifier Hoos in Suction Sweeper Pump at Sea Survival Unit complete all as specified and as directed. |
| 90 | S & F in repairs RO Membrane Spiral Wound Element with polyamide thin film composite membrane having working temperature and pressure 45°C and 10 Bar, Max Flow Rate of 19 Cu.m / Hour, Max Pressure Drop of 1 Bar, PH Range 2-11, Free Chlorine Tolerance 0.1 PPM and Salt Rejection 99.5% complete all as specified and as directed. Model No. FILMTEC 8040BW30-400 or its Equivalent and of Make: Dupont / GE / DOW |
| 91 | S & F Pressure Gauge of capacity 0 to 14 KG / Sq.cm, with 100mm size Dial including necessary specials and provision of suitable ferrule etc. including taking down existing unserviceable gauge complete all as specified and as directed. [Make: RMCO / Uday / H-Guru] |
| 92 | Supply and fixing Nylon Brush size 0.60 m X 0.15 m including Nut, Bolt, Washers and Springs etc. complete all as specified and as directed. |
| 93 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil for Laying Cables / Pipes etc. complete all as specified and as directed. |
| 94 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 95 | Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed. |
| 96 | M & L for Overhauling of Suction Sweeper Pump of capacity 3 HP, 415 Volts with replacement of Gear Oil, 'V' Belt, Water Seal, 'O' Ring Set complete including reassembling back and testing complete all as specified and as directed. |
| 97 | M & L for cleaning of Water Supply Underground Sump for balancing capacity of 25000 Gallons by bailing out the accumulated water at the bottom and taking out & removing the complete sludge outside MD land and washing out completely, and wire brushing the tanks after scrubbing the walls and bottom of the tank completely with minimum disturbance of water supply to Swimming Pool and applying two coats of white wash inside the tank complete all as specified and as directed. |
| 98 | M & L for cleaning of Swimming Pool of Sea Survival Unit having Capacity approximately 100000 Gallons by Bailing / Pumping Out accumulated dirty water from bottom of Pool, Overflow Channels and allied Sump Areas, removing Sludge, Algae, Dirt, Floating Materials and other Deposited impurities from Pool Surfaces including thorough Cleaning and Scrubbing of Pool Walls, Floor, Corners, Steps, Tiles, Gutters and Overflow Channels, Inlet / Outlet Openings, using suitable Tile Scrubbers, approved Acid / Cleaning Chemicals and Non-Metallic Brushes without damaging or disturbing existing Wall / Floor Tile Surfaces, Joints, Waterproofing Treatment and Fittings, collection and disposal of removed Sludge / Debris outside MD Land, washing with Fresh Water and making the pool Hygienically Clean and ready for Refilling/Operation complete with all Labour, Cleaning Materials, Tools & Tackles, Safety Precautions and Incidental Works all as specified and as directed. |
| 99 | M & L for maintenance and repairs to LT Panel Board including replacement of SFU, Fuse Link, Ammeter, Volt Meter, CT Ratio, Indicator Lamps, Start/Stop Push Buttons etc. complete including reassembling back and testing complete all as specified and as directed. |
| 100 | Supply only 3 Core, 6 Sq.mm, Flat Submersible Cable, PVC Insulated, Sheathed, 1100 Volts Grade, Multistranded Copper Conductor complete all as specified and as directed. |
| 101 | S & F in repairs FRP Polyglass Vessel having inner material made up of Polythene, Seamless One-Piece Tank Liner having 24 Inches dia, working temperature in range of 45 to 60°C, Working Pressure 10.34 Bar, of capacity of 450 Litres with complete all as specified and as directed. |
| 102 | S & F in repairs 40mm NB Multiport Valve for RO Plant having water capacity 5000 LPH working on Manual Mode operation complete all as specified and as directed. |
| 103 | Supply only Anti Scalant having Specific Gravity 1.05 to 1.10 and should be mixable in all proportions of water complete all as specified and as directed. |
| 104 | S & F in repairs 20 Inches Spun Filter Cartridge having Porosity of 5 Micron made up of Polypropylene complete all as specified and as directed. |
| 105 | S & F in repairs Metering Pump for RO Plant having Dosing Rate @ 4 KG / Sq.cm, 1.5; 3.0; 6.0 & 10.0 ULPH Suction / Discharge tubing 4/6 mm, Frequency up to 400 SPM, suitable for operation on 230 Volts, AC, 50 Hz Power consumption at 400 SPAM 30 W complete all as specified and as directed. |
| 106 | M & L for Repair and Maintenance of 7.5 HP Monoblock Pump Set having head range up to 40 Metres and discharge range up to 6.8 LPS, suitable for operation on 380 to 440 Volts, 3 Phase AC supply, with Delivery Casing, Impeller and Body made of Cast Iron and Shaft made of Carbon Steel, including Dismantling of Pump Set, checking of Motor and Pump Assembly, Servicing/Replacement of worn out parts such as Bearings, Bush, Shaft Sleeve, Gland Packing, Mechanical Seal, Impeller, Coupling, Nuts, Bolts and Washers as required, cleaning and lubrication of moving parts, Rewinding, connection checking, Alignment, Re-assembling, Testing and Commissioning complete for satisfactory operation of Pump Set, all as specified and as directed. |
| 107 | M & L for painting to Pressure Filter Pumps, Pumps connected Pipelines, Panel Boards, Valves, Air Compressor etc. and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer [using Spray Gun] including cleaning and degreasing the surface, complete removal of old, loose and deteriorated paint from surfaces of pump set including dismantling of removable Guards / Covers as required for proper surface treatment, cleaning, scraping, rubbing with emery paper, removal of rust, oil, grease, dirt and other foreign materials from all exposed metallic surfaces, and preparing the surfaces smooth and ready for painting, proper drying between coats, finishing to smooth and uniform appearance, and marking of SM No. / MES No. / Details of Pump Set with approved Paint & Stencil, re-fixing all removed components, protection of nearby Electrical / Mechanical parts during painting, complete all as specified and as directed. |
| 108 | Supply only Poly Aluminium Chloride [PAC] in Liquid / Powder form suitable for Swimming Pool Water Treatment and Algae Control, conforming to IS specifications, complete all as specified and as directed. |
| 109 | Repair and maintenance of Chemical Dosing Pump for Swimming Pool Water Treatment System, including dismantling of Pump Assembly, checking of Motor, Diaphragm, Valves, Tubing and Electrical Connections, Servicing/Replacement of worn out parts such as Diaphragm, Seals, NRV, Foot Valve, Injection Valve, Suction and Delivery Tubing, Fasteners and allied components as required, Cleaning, Calibration, Re-Assembling, Testing and Commissioning complete for satisfactory operation of dosing pump all as specified and as directed. |
| 110 | Repairs / Servicing of Ozone Generator with Oxygen Concentrator and Oxygen Mixing System of capacity 300 Gram / Hour having the following specifications:[i] Ozone Concentration: 8% wt/wt in Oxygen[ii] Cooling Electrode: Water Cooled [iii] No of Electrodes: 03 Nos[iv] Feed Gas: Oxygen from Concentrator[v] Feed Gas Pressure: 0.5-0.1 Bar[vi] Feed Gas Flow Rate: 8 LPM[vii] Cooling Water Flow Rate: 5 LPM[viii] Cooling water Quality: DM Water/ Soft water[ix] Cooling water Pressure: 1-2 Bar[x] Power Consumption of Ozone Generator: 700 W[xi] Cabinet: SSNote: Spares shall be measured and paid separately under respective items of this schedule. |
| 111 | Supply only Ozone Circuit [HSN/SAC – 84212190] complete all as specified and as directed. |
| 112 | Supply only Ozone Cell [HSN/SAC – 8421 2190] complete all as specified and as directed. |
| 113 | Supply only Oxygen Control Card [HSN/SAC – 85049090] complete all as specified and as directed. |
| 114 | Supply only Secondary Filter [HSN/SAC – 84312090] complete all as specified and as directed. |
| 115 | Supply only SMPS RS 12V [HSN/SAC – 85044090] complete all as specified and as directed. |
| 116 | S & F Relay 12 V [HSN/SAC – 85364900] complete all as specified and as directed. |
| 117 | Supply only Pool Algaecide effective against Green, Black Spot & Mustard Algae in 5 KG Packages sealed in Plastic Container complete all as specified and as directed. Make: Declibac or equivalent |
| 118 | Supply only Fast Acting Pool Clarifier suitable to clear Dull, Hazy or Cloudy Water of newly Filled Pools or due to Warm Weather or due to Algae Growth in 25 KG Packages sealed in Plastic Container complete all as specified and as directed. |
| 119 | Supply only Pool Balance Module suitable to increase Chlorine [Sanitiser] Level in Pool Water Target limits for Free Available Chlorine from 2 PPM – 4 PPM in 20 Pieces Packing sealed in plastic container complete all as specified and as directed. Note: Swimming Pool Water Quality aspects shall be maintained / checked keeping Human Health Safety as priority. Swimming Pool Chemicals shall meet the Total Quality Management [TQM] as Accredited with the Integrated Management System Certification and the same shall conform to ISO – 9001 for Quality Management System [QMS], ISO – 14001, Environmental Management System [EMS] ISO – 45001 for Occupational Health & Safety [OH & S] Management System Standards and Swimming Pool Chemical Products shall comply with Food Safety Regulation as recognized by the Food Safety and Standards Authority of India [FSSAI] |
| 120 | M & L for removal of the existing Filter Media from the Filter Bed, cleaning Filter Inside Vessel with suitable Anti-Corrosive Chemical and applying Two Coats of Anti-Corrosive Epoxy Paint, Checking and Cleaning Filter Internal Distribution Piping, One Charge of Filter Media including Cost of Materials [Filter Media], Transportation, Lead, Lift etc. complete all as specified and as directed and comprising of the following specifications: [a] The Pebbles, Gravel, Coarse Sand, Fine Sand of the Filter Media shall conform to IS – 8419 [Part – 1].[b] Placement of the Filter Media of the Pressure Sand Filter Bed in layers complete as per IS Specifications.[c] Filter Media shall be uniformity in size as defined by the Uniformity Coefficient which is the Ratio between the Sieve Size that will pass 60% by weight and the Effective Size of the Media. [d] Shape, Size and Quality of Filter Media and Sand shall conform to IS – 8419 [Part – 1] and specified hereunder.[e] Sand shall be hard and resistant Silica Quartz or Quartzite and free from Fine Clay Particles, Soft Grain Sand, Dirt of any description etc.[f] Effective size shall be 0.45mm to 0.70mm[g] Uniformity co-efficient shall not be more than 1.70 nor less than1.30.[h] Ignition loss shall not exceed 0.70% by weight[i] Soluble Fraction in Hydrochloric Acid shall not exceed 5.00% by weight.[j] Silica content shall not be less than 90%[k] Specific Gravity shall be in the Range between 2.55 to 2.65. [l] Wearing Loss shall not exceed 3.00%. |
| 121 | Supply only Bleaching Powder [ISI Marked] suitable for Disinfection and Water Treatment of STP / Swimming Pool, including transportation, loading / unloading and delivery at site complete all as specified and as directed. |
| 122 | S & F 50mm bore Un-plasticised PVC pipes of Schedule - 80, ISI Marked, suitable for Water Supply / Pressure Application, complete with all fittings such as Bends, Tees, Sockets, Unions, Reducers, Nipples and Specials, including cutting, threading, jointing with solvent cement, clamping/supporting, testing for leakage and commissioning, fixed complete to walls, ceilings or laid in floors or trenches etc. including taking up or down existing GI tubing complete all as specified and as directed. |
| 123 | S & F 100mm bore Un-plasticised PVC pipes of Schedule - 80, ISI Marked, suitable for Water Supply / Pressure Application, complete with all fittings such as Bends, Tees, Sockets, Unions, Reducers, Nipples and Specials, including cutting, threading, jointing with solvent cement, clamping/supporting, testing for leakage and commissioning, fixed complete to walls, ceilings or laid in floors or trenches etc. including taking up or down existing GI tubing complete all as specified and as directed. |
| 124 | S & F 150mm bore Un-plasticised PVC pipes of Schedule - 80, ISI Marked, suitable for Water Supply / Pressure Application, complete with all fittings such as Bends, Tees, Sockets, Unions, Reducers, Nipples and Specials, including cutting, threading, jointing with solvent cement, clamping/supporting, testing for leakage and commissioning, fixed complete to walls, ceilings or laid in floors or trenches etc. including taking up or down existing GI tubing complete all as specified and as directed. |
| 125 | S & F 50 mm bore CPVC Pipes, SDR 13.5 & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 126 | S & F HDPE Pipe 150mm dia, PN 10 suitable for Water Supply Application, including all Fittings, jointing by Butt Fusion / Electrofusion Method, Cutting, Lowering, Laying, Clamping, Testing for Leakage, Testing and Commissioning complete including taking down or up steel tubing and connections of any description complete all as specified and as directed. |
| 127 | Supplying, laying and testing XLPE insulated and PVC sheathed, FRLS, GI Strip / Wire armoured heavy duty cable, ISI marked with Multistranded Copper Conductor 1100 Volt grade of size Single Core, 6 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc. including taking down old LT Cables of any description complete all as specified and as directed. |
| 128 | M7 L for Cleaning of E/M Installation [Pump House] including clearing of vegetation, wild growth and trimming of Grass / Shrubs / Plants / Trees etc. around the installation compound to upkeep of the installations in neat and tidy conditions complete all as specified and as directed. |
| 129 | S & F in repairs Foot Valve, Cast Iron Body, 50mm bore with Flanged ends of any pattern with Bypass Arrangement and Confirming to IS – 4038, Class PN 2.0, ISI Marked having Gunmetal Disc Face Ring, Nitrile Rubber, Hinge Pin of Stainless Steel AISI-410 with Cast Iron Bolted Stainer including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer complete all as specified and as directed. |
| 130 | S & F in repairs Foot Valve, Cast Iron Body, 80mm bore with Flanged ends of any pattern with Bypass Arrangement and Confirming to IS – 4038, Class PN 2.0, ISI Marked having Gunmetal Disc Face Ring, Nitrile Rubber, Hinge Pin of Stainless Steel AISI-410 with Cast Iron Bolted Stainer including all Joints with Rubber Gasket and Jointing Materials, Bolts, Nuts, Washer complete all as specified and as directed. |
| 131 | Supply and fix in repairs Trolley [M.S.] Mounted Suction Sweeper Machine with Cleaning Kit and 7.5 HP Motor Corrosion Resistance, Prolonged Service Life Performance oriented complete all as specified and as directed. |
| 132 | Supplying, Installing, Commissioning and Testing of CPRI Prototype tested, Factory made, Free Standing Floor Mounted, Dust and Vermin proof LT Cubical Panel Board, Compartmentalised, Outdoor type, fabricated with 3.15mm thick CRCA Sheet and shall be given pre-treatment for degreasing, phosphatising etc. in seven tank process and shall be powder coated with RAL7035 coat with matt finish after due preparation of surfaces. The panel shall consist of 600 Amps rating TPN bus bars of high conductivity Copper Alloy and shall be provided with colour coded heat shrinkable sleeves mounted on porcelain insulator supports, suitable double Compression Copper Cable Glands and panel shall be provided with separate compartments for each switch, with gland plates, lifting hooks, shutter type ventilating louver at both top & bottom duly internally secured with wire mesh, with suitable internal wiring with copper cable of suitable size, including instrumentation such as Ampere Meter, Volt Meter, Phase Indicating LED Lamps [RYB], Selector Switches etc with double stud hinged door, front openable with locking arrangement including interlocking with switch gears and suitable for 1100 Volts Grade, 3 Phase, 415 Volts, 4 Wire, 50 Hz, AC Supply and to withstand short circuit fault level of not less than 100KA and degree of protection shall be IP 54. The panel shall be fixed with angle iron frame made of angles of size 75 X 75 X 8mm at Corners and ISMC of suitable size for base, embedded 600 mm below ground level in PCC 1:2:4, Type B–1 using 20mm grade stone aggregate, 600 mm above ground level complete including connecting up with existing incoming and outgoing cables etc. and disconnecting and taking down existing LT Panel of any description and comprising the following: |
| 133 | [a] MCCB, 400 Amps, FP, 36 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 1 Nos [Incoming][b] MCCB, 160 Amps, FP, 25 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 2 Nos [Outgoing][c] MCCB, 100 Amps, FP, 25 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 2 Nos [Outgoing][d] MCCB, 63 Amps, FP, 25 KA, 440 Volts, 3 Phase, AC, 50 Hz, Adjustable type complete with Overload Protection, no-volt thermal based release – 1 Nos [Outgoing][e] On-Load Changeover Switch, FP, 250 Amps, 415 Volts, 50 Hz, AC, Front Operated Handle with Advance Neutral – 1 Nos[f] Multi Function Meter, Digital Type [Displaying A, V, PF, Hz, KVA, KW, KVAR, KWH, KVARH etc. Class 0.5] with CTs & Selector Switch – 4 Nos [1 Set].[g] Colour Coded LED Phase Indicating Lamps for each Phase – 1 Set. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
