Tender For Certain Repairs And Maintenance To Roof And Other Connected Works At Otm And Md Accn At Kalina And Juhu Under Ge (N) Santacruz Mumbai
Tender Value
40 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs And Maintenance To Roof And Other Connected Works At Otm And Md Accn At Kalina And Juhu Under Ge (N) Santacruz Mumbai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Jul-2026 | BOQ Corrigendum | BOQ | 17-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Dismantling of un-framed timber scantlings 40 sqcm and over in section, in any position all as specified and as directed by Engineer-in-Charge. |
| 5 | Supply and fix plain solid straight scantling as in purlin, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for cutting holes in brick walls for inserting angle iron trusses/ rafters, depth of embedded portion measured from the face of the jamb into the wall, exc one brick but n exc two bricks and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for providing Plain cement concrete 1:2:4, type B1 (Nominal mix) using 20mm graded stone aggregates as in coping or bed block of angle iron swn neck post at security wall and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux/Birla Opus paint |
| 9 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.Make: JINDAL / INDALCO / HINDALCO / TATA / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets |
| 11 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.Make: JINDAL / INDALCO / HINDALCO / TATA / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets |
| 12 | Supply and fix 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap in roof, fixed with L type or J type or cranked hook bolts with washer or as per manufacturer's instruction including sealing of screwed points/'J' hooks with aluminium tape/water proofing spray complete all as specified and as directed by Engineer-in-ChargeMake: Everest Industries Ltd (EVEREST) or equivalent |
| 13 | Supply & Fix 0.8mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engr-in-Charge. |
| 14 | Dismantling of 110mm dia cast iron/ PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge |
| 15 | Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, laid in trenches or fixed to wall complete all as specified and as directed by Engineer-in-Charge.Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral |
| 16 | Supply and fix PVC (SWR) bends any radius with access door, 110mm bore complete all as specified and as directed by Engineer-in-ChargeMake :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral |
| 17 | Dismantling of false ceiling/wall clading of any type & any thickness including cover fillets & removing clear off site complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1265 including all ceiling cleats, 6 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including exposed metal frame ceiling with 12mm thick gypsum board for fixing in 605 x 605 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan |
| 19 | Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan |
| 20 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for Pre-cast cement concrete block masonry 1:3:6 type C1, (using 20mm graded stone aqggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 24 | Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external fair surfaces of the brick, PCC block or concrete surfaces, mixed with waterproofing compound @ 3% by weight of cement or as per manufacturer's instructions and upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately |
| 25 | Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit |
| 26 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India/Birla Pous paint( True One Plus) |
| 27 | Disconnecting existing tank of capacity exceeding 250 ltrs and not exceeding 500 ltrs, setting aside (or lowering if required), Cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting, reconnecting and refixing in position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Disconnecting existing tank of capacity exceeding 500 ltrs and not exceeding 1000 ltrs, setting aside (or lowering if required), Cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting, reconnecting and refixing in new position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Disconnecting existing tank of capacity exceeding 1000 ltrs and not exceeding 2000 ltrs, setting aside (or lowering if required), Cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting, reconnecting and refixing in new position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Dismantling PVC water tank exceeding 250 ltr but not exceeding 500 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge. |
| 31 | Dismantling PVC water tank exceeding 500 ltr but not exceeding 1000 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 500 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position as specified in SSR Part I and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex |
| 33 | Supply and fix rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position as specified in SSR Part I and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex |
| 34 | Supply and fix in repairs gun metal gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge.Make : Leader/ Bir/ Zoloto/ Kirloskar |
| 35 | Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge.Make : Leader/ Bir/ Zoloto/ Kirloskar |
| 36 | Supply and fix in repairs 20mm dia Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 210 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag Polymer/ Symet |
| 37 | Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 455 gms) Make- Jaypee /GMP / Neta/ Zolota/Prayag Polymer/ Symet |
| 38 | Taking up or down steel tubing and connections for 25mm bore of pipe including cleaning for refixing or removing to store complete all as specified and directed. |
| 39 | Taking up or down steel tubing and connections for 20mm bore of pipe including cleaning for refixing or removing to store complete all as specified and directed. |
| 40 | Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 41 | Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clampss complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith |
| 42 | Material and labour for preparing new or old wood surfaces of any description width or girth, not otherwise described and treated with two coats of Creosote oil complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supply and fix Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed by Engineer-in-Charge. |
| 44 | Demolition of the existing brick coba treatment over roof slab completely including thoroughly cleaning complete all as specified and removal of the demolished material to outside of MD land complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Material and labour for PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc complete all as specified and as directed by Engineer-in-Charge |
| 46 | Material and labour for 10mm thick rendering with cement mortar 1:3, mixed with water proofing compound, on concrete roof surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.Note: waterproofing compound shall be measured separately Please Enable Macros to View BoQ information |
| 47 | Material and labour for 10mm thick rendering with cement mortar 1:3, mixed with water proofing compound, on concrete roof surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.Note: waterproofing compound shall be measured separately Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender