|
| 1 | Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth soft & loose soil for laying of pipe including getting out forming bottom surfaces complete all as specified. |
| 2 | Returning filling in soil including spreading, levelling , watering and well ramming in layers n. exc. 25 cm thick complete all as specified. |
| 3 | Removing of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified. |
| 4 | Supply, fix and jointing steel water tubing of 80mm bore medium grade, galvanised iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Tata / Jindal / Surya Prakash / Zenith |
| 5 | ditto as per item no 04 above but for 50 mm GI bore pipe. |
| 6 | ditto as per item no 04 above but for 40 mm GI bore pipe. |
| 7 | ditto as per item no 04 above but for 25 mm GI bore pipe. |
| 8 | Supply, fix, joint and testing CI/DI Sluice Valve medium grade of 150mm dia, with stainless steel spindle, PN 1.6 (Flanged) with iron wheel head, hand operated, bronze body seat ring, jointing, coupling both ends for cast iron pipes including nuts, bolts, rubber gaskets etc including taking down old unserviceable Sluice valve complete all as specified and as directed by Engineer-in-charge for following sizes:Make: Kirloskar / Kartar / Upadhaya / Leader / Venus / L & T (audco) |
| 9 | ditto as per item no 8 above but for 100 mm dia. |
| 10 | ditto as per item no 8 above but for 80 mm dia. |
| 11 | Material and labour for dismantling the unserviceable existing vave chamber and construction of new valve chamber of size 900mm x 900mm x 900mm ( Internal size) including necessary excavation and earth work in any type of soil, PCC foundation (1:3:6) type C-2, using 40mm graded stone aggregate as in base concrete 100mm thick, 15cm offset, 230mm thick brick work in CM 1:6 with 10 mm thick rendering internally and 15 mm thick externally in CM 1:4, 50mm thick PCC 1:2:4 type B1 as in coping, 6 mm thick MS cover with hinges and locking arrangement, fixed to angle iron frame made out of 40 x 40 x 6 mm MS angles complete with two coats of synthetic enamel paint over one coat of red zinc chrome primer on all metal surfaces & three coats of white wash on all plastered surfaces of valve chambers including dismantling of unserviceable valve chamber with rusted MS cover without disturbing the existing pipeline etc complete all as specified & directed by Engineer -in-Charge. |
| 12 | Material and labour for dismantling U/S electric motor of 415 volts, 25 HP capacity including removing of electric connection from its position carefully and transporting the same to the work shop for rewinding of motor (both stator and rotor) with super enamelled copper wire of same size with insulating materials , varnishing and baking, servicing etc, refixing the same at site and realingment with coupling with pupmping set etc., testing & commissioning for satisfactory functioning etc complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for dismantling U/S electric motor of 415 volts, 5 HP to 10HP capacity including removing of electric connection from its position carefully and transporting the same to the work shop for rewinding of motor (both stator and rotor) with super enamelled copper wire of same size with insulating materials , varnishing and baking, servicing etc, refixing the same at site and realingment with coupling with pupmping set etc., testing & commissioning for satisfactory functioning etc complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Supply & Fix in repairs pressure gauge dial type 4\\" for measurement of the water pressure up to 14 Kg as per existing size complete all as specified and directed.Make- Waarrie/H-Guru |
| 15 | Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth strip 32 x 6mm, upto 7.5 m long from earth point to test point and other end connected to control / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm layer all around the earth plate including pouring of Benzonite powder earthing chemical not less than 20 Kg to enhance the earth resistance all as shown in electrical plate No.3 of MES schedule Part I, 2009 with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Material and labour for repairing of pipe line by welding of GI/DI/CI fitting of size 20mm-65mm dia at various locations to prevent leakage by welding of flanged/ sockets/ collars, ferrule or at the joints of including GP Joint,T Joint,sluice valves/ air release valve/non return valves or damaged pipelines etc.including necessary excavation and returning and filling and making disturbed surface good complete all as specified and as directed by Engineer-In-Charge |
| 17 | Material and labour for repairing of pipe line by welding of GI/DI/CI fitting of size 80-150mm dia at various locations to prevent leakage by welding of flanged/sockets/collars,ferrule or at the joints of including GP Joint,T Joint,sluice valves/ air release valve/non return valves or damaged pipelines etc.including necessary excavation and returning and filling and making disturbed surface good complete all as specified and as directed by Engineer-In-Charge |
| 18 | Material and labour for Painting of motor, pump base, discharge line and suction line complete with all accessories including panel board, scrapping thoroughly existing corroded paint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-In-Charge.Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd/Birla opus paint |
| 19 | Supply and fix gun metal gate valve of 50mm bore with iron wheel head, screwed both ends for iron pipes & fixed including taking down existing etc complete all as specified and as directed by Engineer-in-Charge for following sizes:Make: Kirloskar / Zoloto / Kartar / Upadhaya / Leader / BIR |
| 20 | ditto as per item no 18 above but for 40 mm GI bore. |
| 21 | ditto as per item no 18 above but for 25 mm GI bore. |
| 22 | Material & Labour for testing of water quality by taking water sample from pump houses and taking to govt. approved water testing laboratory and showing results of physical & Chemical characteristics and micro biological test of water as per IS-10500 of 2012 and till latest version from each pump house complete all as specified and directed by engr-in-charge. Note : In The test report following test should be conducted:- (a)Physical Tests:- Turbidity,Color,Odor & Taste,Temperature (b) Chemical Tests:- pH Test,Hardness,Chlorine Residual,Total Dissolved solids(TDS),Fluoride,Nitrate/Nitrite,Heavy Metals (c)Biological Tests- Total Coliform Test,E.Coli Test, Pathogen Detection. (ii)price must include the transparent Sterilized glass bottel in which water to be filled of minimum 1 ltr. |
| 23 | Material and labour for removing existing old unserviceable water meter and supply, fix and testing new water meter of size 150mm (6\\") industrial type, super dry dial, helix turbine type removable mechanism and works on magnetic drive, class 'B' with flanged ends including CI collar with flange, suitable hexagonal bolts, nuts with rubber gasket and fasteners etc complete all as specified and as directed by Engineer-in-Charge. Note: The rates includes testing meter to concern BMC Office and test report shall be submitted by the contractor to Dept. before installing new meter. Make: Kranti / Capstan / Fedrel/ Balento |
| 24 | Material and labour for removing existing old unserviceable water meter and supply, fix and testing new water meter of size 100mm (4\\") industrial type, super dry dial, helix turbine type removable mechanism and works on magnetic drive, class 'B' with flanged ends including CI collar with flange, suitable hexagonal bolts, nuts with rubber gasket and fasteners etc complete all as specified and as directed by Engineer-in-Charge. Note: The rates includes testing meter to concern BMC Office and test report shall be submitted by the contractor to Dept. before installing new meter. Make: Kranti / Capstan / Fedrel/ Balento |
| 25 | Material and labour for Fabrication of Steel ladder with Stainless Steel 50mm dia from top of the UG Sump to floor of UG sump with 316L Stainless Steel 25 mm dia cross steps 30 cm apart duly welded and with two coat of bituminous black paint and necessary fixing arrangements with MS clamps, nut & bilts duly grouted on wall/ floors all as directed. |
| 26 | Material and labour for desludging / desilting of underground sedimentation reservoir of 50000 Gallons capacity by draining out water / sludge from tank, removing all scales, dirt, algae and other growths from floor, roof, inside of tanks and from mouths of circulating pipes by rubbing with wire brushes and high pressure cleaning method with rotary sets with approved detergents and sucking out all dirty water, disinfecting the tank with approved chemical solutio for making surface bacteria free and finally cleaning with fresh water to the satisfaction of Engineer - in- Charge including painting MS plates manhole covers, suction pipes, rugs, etc. with two coats of anticorrosive paint including removing all dirt outside land to a distance exc.50 mts complete all as specified and as directed by Engineer-in-Charge. |
| 27 | All as per item No.19 described here-in-before but 15000 Gallons capacity |
| 28 | All as per item No.19 described here-in-before but 100000 Gallons capacity |
| 29 | All as per item No.19 described here-in-before but 50000 Gallons capacity |
| 30 | Cleaning of valve pit chamber of any size by taking out mud & muddy water and depositing the same at a distance n. exc 50 mtr away from pit including swipping free from all type of dirt including rectification the leakage of valve of any size by using of appropriate size and required packing materials for purpose complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Material and labour for cutting the existing bitumen road / hard standing etc of any description of surfaces and excavation in trenches not exceeding 45cm wide and depth not less than 45cm for passing of DI/GI pipe and making good the disturbed surface as per existing filled with excavated material and top 200mm depth with PCC 1:3:6, type C1 using 20mm graded stone and readymix topping etc complete all as specified and as directed by Engineer-in-Charge |
| 32 | Supply and fix flanged ball Foot Valve 150mm dia conforming to IS 4038 and PN 0.2 shall be swing type, rigid, sturdy design with minimum loss of head across the valve including necessary fixing arrangements including taking down complete all as specified and as directed by Engineer-in-Charge. Make: Kirloskar / Normex(model no B-05(N)) / Kartar |
| 33 | Supply & Fix cast iron body non return Valve 100 mm dia ISI marked, flanged both ends SIR-05 RV, including necessary fixing arrangements, jointing materials including taking down existing complete all as specified and directed by Engr-in-Charge. Make:-Kirloskar / Upadhaya / Leader / BIR / Zoloto |
| 34 | Material & Labour for taking down and re-fixing rolling shutters of any thickness, carefully without causing damage or deformation, including all necessary fittings and fixtures, complete servicing such as oiling and greasing, attending to ball bearings, safety lever locks, and making the shutter fully serviceable and smooth in operation, complete in all respects, as directed by the Engineer-in-Charge. |
| 35 | Material and labour Drilling and fixing teflon nozzles in RCC members such as RCC overhead reservoir / underground sump at Malad/Kandivali/Marve, including drilling holes (drilling 12 mm dia, 40mm deep holes in structural members at the intervals of 600mm c/c in staggered manner or as directed by Engineer-in Charge in RCC structure elements and cleaning the holes (to clean the holes by air blower prior to fixing nozzles) and fixing of nozzles to insert 12mm dia teflon nozzles in cleaned holes external end of nozzles to be machined to receive outlet of grouting gun and fixing it inside the holes by applying thixotropic epoxy putty to ensure complete sealing and curing the system for minimum 12 hrs and cutting of nozzles to cut the nozzle by chisel after completion of grouting without damaging structural elements etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE |
| 36 | Material and labour for injection of low-viscosity (3–5 cps) high molecular weight monomer in overhead/underground/semi-underground tanks at Malad/Kandivali/Marve by pressure using a mechanized injection gun with all accessories, carried out through pre-fixed nozzles till refusal, complete. The work includes mixing of components (Part A & Part B) in required proportions by weigh batching as per manufacturer's instructions; filling the injection gun; maintaining injection pressure using an air compressor and ensuring outlet pressure of 4 to 5 kg/cm² with pressure gauge monitoring; injecting the material into structural members through nozzles till refusal; sealing of nozzles with epoxy putty after refusal; monitoring and controlling leakage through adjacent nozzles during injection and sealing the same as required; repeating the process for all nozzles; ensuring execution within the pot life of the material; and cleaning of the injection gun and accessories such as valves, pipes, and fittings with thinner after completion to prevent clogging, complete in all respects, as specified and as directed by the Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE |
| 37 | Material and labour for taking down existing plaster and rendering 15 mm thick on concrete surfaces using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd / 'Easy plast' of M/s Walplast Products Pvt Ltd / 'Readiplast' of M/s Ultratech Cement Ltd' / Sound last PMC-1 of M/s Sound build care Pvt Ltd /or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering in wall /floor having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over concrete surfaces including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge. |
| 38 | Material and labour for preparation of newly plastered /old decorated wall / floor surfaces and applying two coats of cement based paint etc complete all as specified and as directed by Engineer-In-Charge.Make : Snowcem/Duracem/Aquacem/Berger/Shalimar/Birla Opus paint |
| 39 | Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Material and labour for taking down unserviceable items of water level indicator of over head / UG Sump service tank of capacity upto 50000 gallons and carrying out repair / maintenance work including supply and fix following items all as specified and as directed by Engineer-In-Charge.(a) Copper ball (As per sample ) - 1 No(b) Nylon coated steel rope dia not less than 8mm - Approx 18RM(c) MS pulley with support (As per sample) approx - 10Nos(d) GI pipe for protection of nylon rope 20mm dia - 10RM(e) MS sheet & angles, frame channel with moving indicator arrangement including scale marked and with two coats of synthetic enamel paint over a coat of red zinc chrome primer etc. |
| 41 | Material and labour for desludging / desilting of fire tank (opened from top) of 90000 ltrs capacity by draining out water / sludge from tank, removing all scales, dirt, algae and other growths from floor, roof, inside of tanks and from mouths of circulating pipes by rubbing with wire brushes and high pressure cleaning method with rotary sets with approved detergents and sucking out all dirty water, disinfecting the tank with approved chemical solution for making surface bacteria free and finally cleaning with fresh water to the satisfaction of Engineer - in- Charge including painting MS plates manhole covers, suction pipes, rugs, etc. with two coats of anticorrosive paint including removing all dirt outside land to a distance exc.50 mts complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labour for desludging / desilting of fire tank (opened from top) of 180000 ltrs capacity by draining out water / sludge from tank, removing all scales, dirt, algae and other growths from floor, roof, inside of tanks and from mouths of circulating pipes by rubbing with wire brushes and high pressure cleaning method with rotary sets with approved detergents and sucking out all dirty water, disinfecting the tank with approved chemical solution for making surface bacteria free and finally cleaning with fresh water to the satisfaction of Engineer - in- Charge including painting MS plates manhole covers, suction pipes, rugs, etc. with two coats of anticorrosive paint including removing all dirt outside land to a distance exc.50 mts complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Material and labour for desludging / desilting of fire tank (opened from top) of 270000 ltrs capacity by draining out water / sludge from tank, removing all scales, dirt, algae and other growths from floor, roof, inside of tanks and from mouths of circulating pipes by rubbing with wire brushes and high pressure cleaning method with rotary sets with approved detergents and sucking out all dirty water, disinfecting the tank with approved chemical solution for making surface bacteria free and finally cleaning with fresh water to the satisfaction of Engineer - in- Charge including painting MS plates manhole covers, suction pipes, rugs, etc. with two coats of anticorrosive paint including removing all dirt outside land to a distance exc.50 mts complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fix mosquito net for underground fire tanks, knotted, UV stablised, high density polyethylene provided with 8mm dia border rope of suitable size for tightening the net with tank for each tank from all around suitable to control entering the mosquitos, insects, birds, leaves and litter etc complete all as specified and directed by engr-in-charge. |
| 45 | Material and laying , DI pipe 100 mm bore (Ductile iron pipe DN 100) spigot and socket ends, class \\"K-7\\" with rubber gasket (tighten joint) , laid in trenches including necessary cut to length to match the existing fitting/pipes or insertion of new DI specials fittings such as spigot,socketed pipe,bends of any angle/radius,Tee Pieces,single/double branch,reducers,sockets,collars,caps including taking down old UNSV CI/DI pipe line incl all fittings, complete all as specified and as directed by the Engineer-in-charge.Note :- excavation and earth work will be measured and paid separately.Make:-Electro Steel / Kesoram / Lanco / Jindal / Kalinga |
| 46 | Material and laying , DI pipe 150 mm bore (Ductile iron pipe DN 150) spigot and socket ends, class \\"K-7\\" with rubber gasket (tighten joint) , laid in trenches including necessary cut to length to match the existing fitting/pipes or insertion of new DI specials fittings such as spigot,socketed pipe,bends of any angle/radius,Tee Pieces,single/double branch,reducers,sockets,collars,caps including taking down old UNSV CI/DI pipe line incl all fittings, complete all as specified and as directed by the Engineer-in-charge.Note :- excavation and earth work will be measured and paid separately.Make:-Electro Steel / Kesoram / Lanco / Jindal / Kalinga |
| 47 | Material & Labour for replacement of valve chamber cover/UG Sump cover with angle iron framed works by welding angle iron framed works by welding angle iron of size 40x40x6mm and 3mm MS sheets of Fe-410W (gde-E-250) quality-B,with handle and hinged at one side all as specified and as directed including applying synthetic enamel paint two coat of red oxide primer. |
| 48 | Supply only Chloroscope (Chlorine Testing Kit) 1 PPM to 5 PPM for testing of chlorine in Water including 2 bottle of orthodine Solution Complete all as specified. |
| 49 | Supply, fixing, testing and commissioning of Automation panel in repair for Motor starter panel for controlling of two centrifugal pump sets including Programmable Logic Control (PLC),240 volt AC Relay,Modular card,SMPS,LED indicator lamps with push buttons including internal wiring with 32 Amp 4 pole MCB and 10 SPN MCB with all connections,fabrication,including two coat of powder coated smoke grey colour paint complete all as specified and as directed by Engr-in-charge. |
| 50 | Supply & Fix in repair Coil with Solenoid valve-15mm 230 V AC.Make:-Avcon/Jhonson Control. |
| 51 | Supply & Fix in repair Coil with Solenoid valve-10mm 230 V AC.Make:-Avcon/Jhonson Control. |
| 52 | Supply & Fix in repair Magnetic Level Sensor. Make:-SMI/CRYSTAL/SPLASH |
| 53 | Supply & Fix in repair SS FLAP Butterfly valve of size 100 mm dia with actuator and single phase electric motor complete all as specified and as directed by Engr-In-Charge. Make:-AUDCO/VIRGO/INTERVALVE/L&T |
| 54 | Supply & Fix in repair Limit Switch Actuator suitable for 100mm dia Butterfly Valve complete all as specified and directed. |
| 55 | Supply & Fix repair/replacement of 3 core 1.0 sqmm dia pvc insulated armoured copper cable complete all as specified and directed by Engr-in-charge. Make:- POLYCAB / HAVELLS / PRIMECAB / FINOLEX. |
| 56 | Supply & Fix repair/replacement of 4 core 6.0 sqmm dia pvc insulated armoured copper cable complete all as specified and directed by Engr-in-charge. Make:- POLYCAB / HAVELLS / PRIMECAB / FINOLEX. |
| 57 | Supply & Fix repair/replacement of 5 core 0.5 sqmm dia pvc insulated flexible copper cable complete all as specified and directed by Engr-in-charge. Make:- POLYCAB / HAVELLS / PRIMECAB / FINOLEX. |
| 58 | Supply & fix in repair Pressure Switch 0-10 kg/sq.cm complete all as specified and as directed by Engr-in-charge. Make:-Indfos/Danfoss |
| 59 | Material & Labour for fixing existing leakage in CI/DI pipe by using lead joint / tyton Joint of overhead water tank at Malad/Kandivali.(height of overhead tank is approx 20 mtrs from ground level) by following method:-(i)Dismantle the defective joint carefully(ii) Clean the pipe ends and remove rust,old jointing material,dirt,etc.(iii)Prepare the Joint Surface Properly.(iv) Heat & Apply molten lead (or suitable Jointing Material) to form a tight joint.(v)Carry out proper Caulking/pressing to ensure watertight sealing.(vi)Refix and tighten all connections,supports,and clamps.complete all as directed by Engr-in-Charge.Note:-If Extra Pipes are required,that will be paid in their respective item. |
| 60 | Material & Labour for dismantling existing GI pipe laid on surface upto 50mm size including fittings and relaying into underground trench including all type of GI fittings(bends,elbows,union,niple,Tees)complete all as specified and as directed by Engr-in-charge.Note:-Excavation,Returning and filling,Removing,Gate valve,sluice valve will be measured and paid seperately under respective items of schedule. |
| 61 | Material & Labour for dismantling existing GI pipe laid on surface 80/100mm size including fittings and relaying into underground trench including all type of GI fittings(bends,elbows,union,niple,Tees)complete all as specified and as directed by Engr-in-charge.Note:-Excavation,Returning and filling,Removing,Gate valve,sluice valve will be measured and paid seperately under respective items of schedule. |
| 62 | Material and labour for cleaning submersible boring upto 100 meter taking out the mud particles,unwanted materials inside the boring by borewell cleaning machine/ borewell compressor truck or flushing unit or by any means,after cleaning remove the mud particles to a distance not exc.50 mtrs complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Dismantling the monoblock pump of any capacity upto 25 HP, 415 volts, taking out and varnishing and baking, insulating material, servicing etc, re-fixing the same at site and re-alignment with coupling with pumping set , testing and commissioning complete all as directed by Engr-in-Charge Note: Rewinding of electric motor will be paid under relevant items. |
| 64 | Note: Deduct Credit for demolished / dismantled material of Rs. (-) 1,24,475.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Please Enable Macros to View BoQ information |
