|
| 1 | M&L for 15mm thick cement plaster in cement motar 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed. incl WPC @ 200ML per 50kg cement bag or as manufacture instruction Note-WPC will be measured and paid separately under appropriate items |
| 2 | M&L for 15mm thick cement plaster in cement motar (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed |
| 3 | M&L for 10 mm thick cement plaster in cement motar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc incl taking down plaster of walls scrubbing down with water and dispose off debries where directed by EIC, complete all as specified and directed |
| 4 | M&L for Applying 2 mm thick wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed.Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services. |
| 5 | Supply only water proofing compound complete all as specified. |
| 6 | M&L for applying two coat of oil emulsion distemper including preparation of newly plasterd surfaces of walls, pillars cornces etc complete all as specified and directed. |
| 7 | Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : New surface work (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed. |
| 8 | Material and labour for applying two coats finishing walls with Acrylic smooth exterior paint of required shade : old surface work (one coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm incl prepration with mechanical scrapper and application with spray pump/roller as per direction of paint make approved company instructions complete all as specified and as directed. |
| 9 | Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed. |
| 10 | M&L for Prepration of old surfaces of walls, pillars cornices surfaces includinng scrapping down smoke, soot, and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified. |
| 11 | M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified |
| 12 | M&L for Prepration of old surfaces of cellings includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil emulsion distemper on ceiling of (white /ivory / tinted or any colour ) complete all as specified. |
| 13 | M&L for applying one coat of distemper oil emulsion Ist quality on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. |
| 14 | M&L for subsequent coat of distemper oil emulsion Ist quality (white /ivory / tinted or any colour ) over one coat applied under Srl item No 34 above . complete all as specified and directed. |
| 15 | M/L Birla white putty 1 to 3mm thick on walls/celling where required inside Bldgs incl screpping to receive coats of oil emulsion distemper. complete all as specified and directed. |
| 16 | M&L for applying one coat of synthetic enamel paint on wooden surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 17 | M&L for applying one coat of synthetic enamel paint on steel surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 18 | S&F, in repairs, 20 mm thick, PVC sheet one side prelaminated of approved texture (\\"Celuca Ply of Rajshree make or equivalent in as approved by GE) as in Kitchen cabinet incl autoclosing hinges ,corner runners SS handels incl all necessary fittings fixed with black tip hardend screws complete all as specified and directed incl taking down old cupboards shutters and kitchen cabnets.(Note:- Each member i.e. shelf, partition & shutter of kitchen cabinet shall be measured and paid separately) |
| 19 | S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3 incl taking down old pipe complete all as specified and directed. |
| 20 | S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3incl taking down old pipe complete all as specified and directed. |
| 21 | S&F in repair plastic seat cover white/coloured (as required at site) for water closet padestal pattern with flat bottom and steel chromium plated hinging device complete all as specified and directed. |
| 22 | S&F, in repair, vitreous china floor mounted single piece WC with dule flush cisteren PP soft close seat cover , hinges accessories set as per size 390x610x800mm with cistern fitting (including fixing bolts flush pipe) complete all as specified and directed. |
| 23 | S&F, in repair, vitreous china size of 370x545x370 rimless wall hang WC with UF soft close seat cover , hinges accessories set including fixing bolts but excluding flushing cistern and flush pipecomplete all as specified and directed. |
| 24 | S&F in repair, 600mm x 400mm plain edge mirror of selected quality glass not less than 5mm thick, mounted on wall complete all as specified and directed |
| 25 | S&F, in repair, central hole basin mixer with extended spout 300 mm long braided connection pipe (without popup) for iron pipe or for unions and fixed to 15mm bore pipe complete all as specified and directed. |
| 26 | Supply & Fixed in repairs 15mm bore single lever Sink Mixer complete as specified and as directed. |
| 27 | S&F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed. |
| 28 | S&F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed. |
| 29 | S&F in repairs, stop valves, concealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed for 15mm bore of pipe. |
| 30 | S&F in repair, overhead shower 150mm x 150mm square shape single flow (ABS body chrome plated with gray face plate ) incl shower arm 190mm long with rubit cleaning system complete all as spd and directed. |
| 31 | S&F, in repair Health Faucet/hand shower with 8mm dia 1mtr long easy flexible tube with chrome finish & wall hook complete all as spd and directed. CAT complete all as specified and directed. |
| 32 | S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed. |
| 33 | S&F in repair Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified. |
| 34 | S&F in repair Towel ring round with round flange 164x53x45mm and 8mm thick complete all as specified and directed. |
| 35 | S&F, in repair, CP, soap dish holder size 120mmx100 mm complete all as specified and directed. |
| 36 | S&F, in repair, chromium plated, Toilet paper holder of size 130x140x100mm and weight 320gm complete all as specified and directed. |
| 37 | S&F, in repair chromium plated tubular towel rail 20mm dia 600mm long Complete all as specified and directed |
| 38 | S&F, in repairs, brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges all as specified and directed. |
| 39 | Supply & Fixed in repairs 15mm chromium plated single lever wall mixer 3-in-1 with connector for hand shower arrangementwith connecting legs, wall flannges and wall brackets for hand shower complete as specified and as directed. |
| 40 | S&F in repair continuous (Piano) Hinges mild steel,bright finish or electro galvanised width of flap (when open) 30 mm complete all as specified and directed. |
| 41 | S&F in repair satinless steel magnetic catcher complete all as specified and directed. |
| 42 | S&F in repair Door seal 4mm wide with Fibre Brush and metalic body complete. complete all as specified and directed. |
| 43 | M&L Vitrified tiles 8 to 10 mm thick, in (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling / demolition , coloured tiles laid over and including 15 mm thick screed bed or bedding layer in Cement motar complete all as specfied and directed. |
| 44 | M&L for Vitriefied tiles 8 to 10mm thick square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match incl dismantling / demolition , Coloured on incl plaster (backing coat) 1:4 Cement motar 10mm thick layer in Cement motar complete all as specfied and directed. |
| 45 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 46 | M&L for 30mm thick factorey made solid WPC moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture incl stainless steel wiremesh shall be fixed with 15X15 square tube in rails with screws 8X28mm heat metal zinc coated screws. complete all as specified and directed. |
| 47 | M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.06 sq.m but not exceeding 0.11 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including including screed bed or bedding layer of 15 mm thick cement mortar (1:6) incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.complete all as specified and directed. |
| 48 | S&F, in repair floor double door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 49 | S&F in repair only 75 mm waste fittings, brass chromium plated for sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 50 | S&F in repair 110 mm, waste fittings, brass chromium plated for sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 51 | M&LFinishing walls with textured Interior/exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sq incl prepration of old surface with grinder and repair with 2 MM putty. complete all as specified and directed |
| 52 | M&L for non woven vinyl eco friendly heavy duty thickness 1mm to 2mm wall paper fixed to wall with approved glue with proper plain finish . complete all as specified and directed |
| 53 | S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 54 | S&F made 35mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed. |
| 55 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed. |
| 56 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed. |
| 57 | Taking down old shutters of any description exc. 1.0sqm but not exc. 2.0sqm each complete all as specified and directed. |
| 58 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed. |
| 59 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed |
| 60 | S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. |
| 61 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 62 | S&F in repairs 300mm mild steel ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed. |
| 63 | S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed. |
| 64 | S&F, in repair, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed. |
| 65 | S&F, in repair, Mortice lock, brass, four lever, verticle type, size 100mm complete all as specified and directed. |
| 66 | S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 67 | S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 68 | S&F in repair, 25mm dia, 1mm wall thickness stainless steel, fancy type,decorative curtain rod with decorative ball type brackets ( As per sample) fixed with wooden gutties complete all as specified and directed. |
| 69 | S&F in repair Staniless steel wall Pegs set of six as approved by GE |
| 70 | S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. complete all as specified and directed. |
| 71 | Supply only 32mm, waste fittings, brass chromium plated for basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 72 | Supply and Fixing PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 73 | S&F in repair PVC waste pipe 32mm bore of size 750mm long complete all as specified and directed. |
| 74 | S&F in repair stainless steel plate rack overall size 90 x 75 X 25 cm made out of 0.63mm thick steel sheet as per standard pattern fixing to walls with screwed complete all as specified. |
| 75 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm. complete all as specified and directed |
| 76 | S&F in repair, Vitreous China Wash Hand Basin, white, flat back, size 550 x 400 mm including brass coupling, mild steel brackets fixed to wall with pedestal etc. complete all as specified and directed. |
| 77 | S&F in repair vitreous china ware counter ovel wash hand basin, any colour, size 570 x 450 mm size fixing in slab including fixing waste pipe , CP waste coupling all as specified. |
| 78 | S&F in repair 32mm bore Brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified as directed. |
| 79 | S&F, in repair, 10 ltrs capqacity PVC valveless, syphonic action, type, flushing cistern, low level, white, inlet ball valve, float and handle including brackets and flush pipe to pipe or lever etc complete all as specified and directed. |
| 80 | M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed |
| 81 | Supplying, Hoisting and fixing in repairs 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) & fixing arrangement for inlet/outlet/over flow and vent pipe of standard size including taking down old water storage tank all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 82 | Supplying, Hoisting and fixing in repairs 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) & fixing arrangement for inlet/outlet/over flow and vent pipe of standard size including taking down old water storage tank all as specified in SSR Part-I including 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Please Enable Macros to View BoQ information |