|
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 2 | Manual Labour. |
| 3 | Hiring charges of crane 35 tonne. |
| 4 | Dismantling of reinforced cement concrete |
| 5 | Carriage of building rubbish out to dumping grounds. With approximate Lead - 18 Km. |
| 6 | Carriage of building rubbish out to dumping grounds. With approximate Lead - 16 Km. |
| 7 | Carriage of building rubbish out to dumping grounds. With approximate Lead - 28 Km. |
| 8 | Supply, installation, testing, and commissioning of Ductile Iron (750/800 mm dia) Double Flange PN-16 resilient seated sluice valve Manual Gear Operated with bypass valve arrangement for installation on existing 750 mm dia MS liner pipe. Conformning to I.S. - 14846 or equivzalent, with product warranty service of atleast 5 years. |
| 9 | Supply, installation, testing, and commissioning of Ductile Iron (750/800 mm dia) PN-25 D/F Double Eccentric Butterfly Valve with extended rod and support system for installation on existing 750 mm dia MS liner pipe. Conformning to I.S. - 14846 or equivzalent, with product warranty service of atleast 5 years. |
| 10 | Supply and installation of new MS liner (750 mm dia, 8 mm thick) Conformning to I.S. - 3589/4270. |
| 11 | Supply and fixing of MS flange 25 mm thick 750 mm dia made out ms plate, as per site requirement. |
| 12 | Supply and fixing of D/F DI Dismantling Joint of 750 mm dia for PN-25/16 valves, suitable as per site requirements. |
| 13 | Supply and fixing of M.S. Hardended Nuts and bolts as per requirement. |
| 14 | Supply and fixing of Rubber Gasket Packing ISI marked for flange joints. |
| 15 | Provision and fixing of Monorail -1.5 ton capacity manual chain pulley block having lift chain length up to the bottom of valve. |
| 16 | Providing and Fixing of Gantry with girder - ISMB 250 (wt 37.3 kg/m) appropriate length as per site including support welding with stiffeners in the chamber complete in all respect. |
| 17 | Painting/coating of all exposed MS surfaces with anti-corrosive bitumen/epoxy coating |
| 18 | Making dewatering arrangement by pumping set 4'' *4'' (Tractor driven) |
| 19 | Testing for leakage, and commissioning of the installed system. |
| 20 | Providing and fixing of dewatering pump set of 2 h.p. capacity. |
| 21 | Preparing, watering and ramming surface for laying concrete. |
| 22 | Cement concrete 1:4:8 with stone aggregate 20 mm gauge. mixing by mechanical means using concrete mixer volumetric type |
| 23 | Plain/Reinforced Cement Concrete in Sub-structure complete as per Drawing and Technical Specifications using concrete mixture . RCC Grade M20 |
| 24 | Furnishing and Placing Reinforced/ Prestressed cement concrete in superstructure as per drawing and Technical Specifications for RCC M-20 grade concrete upto 5m height |
| 25 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 26 | Re-barring ( Chemical Anchor) of 8mm dia bar, hole size 12mm, depth 100mm with 10ml injectable mortar epoxy adhesive (Hybrid urethane methacrylate adhesive) re-baring chemical complete in all respect. |
| 27 | Re-barring ( Chemical Anchor) of 10mm dia bar, hole size 14mm, depth 100mm with 10 ml injectable mortar epoxy adhesive (Hybrid urethane methacrylate adhesive) re-baring chemical complete in all respect. |
| 28 | Re-barring (Chemical Anchor) of 12mm dia bar, hole size 16mm, depth 120mm with 14 ml injectable mortar epoxy adhesive (Hybrid urethane methacrylate adhesive) rebaring chemical complete in all respect. |
| 29 | Dismentling existing Plank Flooring |
| 30 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position for Tees angles & channels. |
| 31 | Providing chequered plate 8 mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge. |
| 32 | Fillet welding with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge, 6 mm thick. |
| 33 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. Supply of M.S ISA,ISMC,ISMB, Plate etc |
| 34 | Applying priming coat with metal primer on new steel or iron work i/c preperation of surface. |
| 35 | Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work. |
| 36 | Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses |
| 37 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect b) Glazing area above 0.09 sqm, 4mm thick or 10.78 Kg/ sqm. As per CSR Item No 17.26 b (ii) |
| 38 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 110mm o/d PVC pipe of 2.5 Kgf. /sqcm |
| 39 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. |
| 40 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade |
| 41 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch. |
| 42 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed) |
| 43 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4sq.mm (Un-sheathed) |
| 44 | Supply of LED Batten 20 Watt |
| 45 | Erection of light fixtures on wall /ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) Cable 0.75 sqmm Complete. Erection of 1x20/28/36/40W Box Type (LED/ Fluorescent) light fixture Please Enable Macros to View BoQ information |
