Tender For Addition Alteration To Bldg No P-25 At Bikram Park And Other Sanction Work Under Ge (South) Udh Ur
Tender Value
29.04 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
14 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Bldg No P-25 At Bikram Park And Other Sanction Work Under Ge (South) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : ADDN/ALTN TO BLDG NO P-25 AT BIKRAM PARK AND OTHER SANCTION WORK UNDER GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)- 81/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each incl iron mongry complete all as specified and as directed by Engr-in-charge. |
| 3 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified and as directed by Engr-in-charge |
| 4 | M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 6 | Surface dressing n exc 15 cm deep and getting out in soft/loose soil complete all as specified and as directed by Engr-in-charge. |
| 7 | Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and as directed by Engr-in-charge. |
| 8 | Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and as directed by Engr-in-charge. |
| 9 | Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge. |
| 10 | M&L for RCC type B-1 1:2:4 (20mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engr-in-charge. |
| 11 | S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engr-in-charge. |
| 12 | Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified and as directed by Engr-in-charge. |
| 13 | M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium or foundation and plinth in built in CM 1:4 all as specified and all as specified and as directed by Engr-in-charge. |
| 14 | S&F for PVC (SWR) pipes(110mm Dia) single socketed in any length with rubber joints laid in tranches, floor and similar work complete all as specified and as directed by Engr-in-charge. |
| 15 | M & L for Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge |
| 16 | M & L 75mm the PCC 1:3:6 type C-2 as plinth protection, finished even and fair without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 17 | M&L for Providing and fixing 10mm thick plaster of paris designer ceiling (Gypsum anhydrous) (cop/moulding), moisture resistant to flat surface over metal frame work and reinforced with G.I. wire including intermediate, perimeter channel wall channel, along with nuts and bolts connecting plates for gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer and putty on exposed surface complete all as specified and as directed by Engr-in-charge. Note: (a) Design of panelling board all as specified and as directed by Engr-in-charge (b) GI grid, haunching system shall be of same manufacture. |
| 18 | S&F solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick woodgrain printed colour PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and as directed by Engr-in-chargee. |
| 19 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x600x7mm thick laid over 10-12 mm thick screed bed in CM 1:3, set and joint in neat cement slurry and pointed in white or colour cement to match. |
| 20 | Providing and fixing factory made uPVC white/coloured casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Door/Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleek with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 21 | S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides & one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by Engr-in-charge. |
| 22 | S&F 1mm thick wood grain printed Sunmica/PVC sheet (Design as approved by Engr in Charge) fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and as directed by Engr-in-charge. |
| 23 | S&F stainless steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed by Engr-in-charge. |
| 24 | S&F 200 mm long stainless steel barrel tower bolt of extruded section complete all as specified and as directed by Engr-in-charge. |
| 25 | S&F 150 mm length stainless steel handles fabricated type anodised complete all as specified and as directed by Engr-in-charge. |
| 26 | S & F 300 mm long stainless steel sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-charge. |
| 27 | S&F 5mm thick toughened glass (Etching design on glass as approved by Engr in Charge) as in windows, partitions, doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed by Engr-in-charge. |
| 28 | Aluminium alloy powder coated (50 micron) anodized frame of section 85mm x 44mm x 2mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, partly glazed with 5mm thick tinted glass and partly with 12mm thick prelaminated particle board complete all as specified and as directed by Engr-in-charge. |
| 29 | M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 30 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 31 | M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed by Engr-in-charge. |
| 32 | M&L for coloured chequered cement concrete tiles 30cmx30cmx2.5cm, machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over 15 mm thick screed be in CM 1:6 complete all as specified and as directed by Engr-in-charge. |
| 33 | S&F in repair counter top vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete. Make : Jaquar Make :KUS-WHT-35601 or its equivalent in Hindware/Cera |
| 34 | S&F 5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glass complete all as specified and as directed by Engr-in-charge. |
| 35 | S&F in repair Water closet single piece pattern coloured of size 370x695x795 mm as approved and complete all as specified and as directed by Engr-in-charge . Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera |
| 36 | S & F in repair 15 mm dia WHB mixer/wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed by Engr-in-charge. Make - Jaquar Cat No KUP-35011BPM or equivalent in Hindware/Cera |
| 37 | S&F in repair 15 mm bore CP Bib tap complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat Part No CON 107KN and equivalent in CERA. |
| 38 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 39 | S&F in repair 15 mm dia Angle valves/ stop cock ,fancy type and chromium plated screwed down high-pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed by Engr-in-charge Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera |
| 40 | M&L vitreous China urinal half stall type white incl waste pipe and connected accessories complete all as specified and as directed by Engr-in-charge. Make - Jaquar Cat No URS-WHT-13253O or equivalent in Hindware/Cera |
| 41 | S&F concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. Make - Jaquar Cat No PRS-077 or equivalent in Hindware/Cera |
| 42 | S&F urinal spreader of CP any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and as directed by Engr-in-charge. Make - Jaquar Cat No URS-WHT-13253O or equivalent in Hindware/Cera |
| 43 | S&F in repair Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and as directed by Engr-in-charge. Make : Jaquar and equivalent . |
| 44 | S&F in repair chromium plated toilet paper holder complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA. |
| 45 | S&F 600 mm long brass chromium plated towel rail fancy type complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA. |
| 46 | S&F in repair soap dish complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA. |
| 47 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed by Engr-in-charge |
| 48 | S&F PVC connection 15 mm dia and 600mm long with two Nos of brass check nuts and washers complete all as specified and as directed by Engr-in-charge. |
| 49 | S & F 15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed by Engr-in-charge |
| 50 | S & F 20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed by Engr-in-charge. |
| 51 | S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall or in trenches complete all as specified and as directed by Engr-in-charge. |
| 52 | S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and as directed by Engr-in-charge. |
| 53 | S&F PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good all as specified and as directed by Engr-in-charge |
| 54 | M&L for preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. |
| 55 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engr-in-charge . |
| 56 | M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed by Engr-in-charge. |
| 57 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping, benching and similar work etc including necessary form work complete all as specified and as directed by Engr-in-charge. |
| 58 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in drain, walls and similar work etc complete all as specified and as directed by Engr-in-charge. |
| 59 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed by Engr-in-charge. |
| 60 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement in repair complete all as specified and as directed by Engr-in-charge. |
| 61 | M&L 3mm thick wall care putty on wall complete all as specified and as directed by Engr-in-charge |
| 62 | M&L for two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed by Engr-in-charge. |
| 63 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engr-in-charge. |
| 64 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sgm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 800 x 800 mm |
| 65 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete all as specified and as directed by Engr-in-charge. Size of Tile 800x800 mm |
| 66 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sgm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, all as specified and as directed by Engr-in-charge : 12.5 mm thick tapered edge gypsum plain board conforming to 1S: 2095- (Part 1) :2011 (Board with BIS certification marks) |
| 67 | Providing and fixing 12 mm thick frameless toughened glass door shutter/railing of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door/railing fittings, all as specified and as directed by Engr-in-charge. |
| 68 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 69 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore |
| 70 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 71 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 72 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red of Area of slab over 0.50 sqgm |
| 73 | 15mm cement plaster of mix : CEMENT PLASTER (IN FINE SAND) 1:4 (1 cement: 4 fine sand) |
| 74 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 75 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 76 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 77 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 78 | M&L for development of lawn area by planting Carpet/Soft grass, maintain as approved by GE including 125mm thick base of good soil well sieved 90% passed through IS Sieve of 10mm size free from stones rubbish like lumps, stones, roots and other foreign materials suitable for gardening. The soil should be fresh from quarry. The colour of the soil generally red including cost of all royality and carriage, all tools, plants, taxes octroi etc watering and unifrom cutting so as to give a uniform green surface with and including 25mm thick manure of well decayed well dried well powdered without clods and free from stones dried grass and other rubbish material. The colour of the manure shall be black. The manure screened through sieve at 1.5 designation 4.75 micron thoroughly mixed with top 50mm layer of soil including watering and uniform cutting so as to give a uniform free surface,complete all as specified and as directed.Notes :- The contractor shall maintain the plant by regular watering, dewatering, de-weeding, cutting/shaping adding fertilizer during the defect liablity period and the cost of this provision is included in the rates quoted by the contractor. |
| 79 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed by Engr-in-charge. |
| 80 | Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and as directed by Engr-in-charge. |
| 81 | Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and as directed by Engr-in-charge. |
| 82 | Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified and as directed by Engr-in-charge. |
| 83 | Point wiring for one light point controlled by one-way 06 Amps switch using 1.5 sq mm FRLSH copper conductor,multi-stranded, PVC insulated and unsheathed, drawn through PVC conduit of minimum 20 mm diameter,medium grade, ISI marked, including all conduit accessories such as bends, tees, junction boxes, elbows, etc, in concealed conduit or on surface/in channel fixed with GI saddle clamps duly screwed, as directed, includes providing modular sunken boxes with PVC back plates for mounting modular type switches, sockets and regulators, complete with modular cover plates, MS screws and cup washers. Providing continuous earth wire with 1.5 sq mm FRLSH copper conductor of 1100 volts grade, It includes cutting of chases and making good the same with cement mortar and finishing of disturbed surfaces with plaster of Paris/putty/distemper/colour wash to match the existing surface, complete all as specified and as directed by Engr-in-chargeNOTE: Continuous earth wire of Green colour should be provided at each point with 1.5 sqmm FRLSH copper conductor cable of 1100 V grade up to ceiling rose/light fitting/fan rod. |
| 84 | All as per srl item No 82 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly. |
| 85 | All as per srl item No 82 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 2.5 sq mm earth wire and connected to earth dolly. |
| 86 | All as per Srl item No 82 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. |
| 87 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge.. |
| 88 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed by Engr In charge. . |
| 89 | S & F modular Bell push flush type 6 amp 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. . |
| 90 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. . |
| 91 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge. . |
| 92 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. |
| 93 | S & F calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge |
| 94 | S & F for electronic step type fan regulator 100 watt 230 volts 50 C/S deluxe modular type complete all as specified and as directed by Engr-in-charge. |
| 95 | S&F single pole and neutral enclosure surface mounted modular type 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and as directed by Engr-in-charge. |
| 96 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specified below :- Rated Wattage: 36 Watts Size: 600mm x 600mmInput Voltage: 220–240 Volts AC, 50 HzType: Edge-lit / Back-lit LED panel, slim designLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approvedBody: Powder coated CRCA sheet / Aluminium housingDiffuser: High transmission opal acrylic / polycarbonate diffuserProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / CromptonNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 97 | S& F Motion Detector Sensor Based LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / Crompton / Bajaj Note:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 98 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type warm white colour with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 99 | Supply and fixing Lighting(16 x16 mm) Aluminium Round LED Strip Lights 1 Mtr Round Profile LEd Corner channel profile with diffused end cap and mounting clamps with space for mounting LED strip of suitable size complete all as specified and as directed by Engr-in-charge. |
| 100 | Supply and fixing of 3-in-1 Cool Day light 6500K,Day Light 4000K,Warm light 3000K LED strip light consisting of high-brightness SMD 5050 LEDs mounted on flexible PCB strip, complete with controller, driver and accessories, suitable for decorative / cove lighting,compatible with Aluminium Profile light housing all as specified and as directed by Engr-in-charge.Technical details:LED Type : SMD 5050 (3-in-1 chip)Operating Voltage : 12 / 24 Volt DCPower Consumption : Approx 14.4 W per metreLED Density : 60 LEDs per metre (minimum)Colour Output : Multi-colour with colour changing facilityControl : IR / RF remote controller with colour and dimming modesProtection : Minimum IP20 (Indoor) PCB Width : 10 mm flexible stripMounting : Self-adhesive backing / aluminium profile as requiredLife span : Minimum 30,000 – 50,000 burning hours Make- Bajaj IVORA or techno commercial equivalent make in Philips/SYSKA |
| 101 | Supply, installation, testing and commissioning of ceiling mounted PIR motion sensor, suitable for controlling LED light fittings, complete as specified below...Type: Ceiling recessed / surface mounted PIR sensorOperating Voltage: 220–240V AC, 50 HzLoad Capacity: Min 1000 Watts (LED compatible)Detection Range: 5–8 metres minimumDetection Angle: 180° minimumTime Delay: Adjustable (30 sec to 5 min or more)Lux Control: Adjustable daylight sensitivityMounting: Recess / surface type as specifiedProtection: IP20 or betterWarranty: Minimum 2 yearsMake: Philips / Honeywell / Havells / Schneider or equivalent approved makeIncluding connection, setting, testing and commissioning complete in all respects all as specified and as directed by Engr-in-charge |
| 102 | Supply, installation, testing and commissioning of Instantaneous Storage Type Electric Water Heater (Geyser) 3 Litre capacity, suitable for wash hand basin use, complete with all accessories as specified below:Capacity: 3 LitresType: Instantaneous / Mini storage typePower Rating: 3 kW (approx.) Input Supply: 230 Volts AC, 50 Hz, Single PhaseHeating Element: Heavy duty copper / glass coated heating elementTank: Pressure type inner tank with anti-corrosion coatingBody: ABS / Rust proof outer body Working Pressure: min 6–8 barSafety Features:Inbuilt thermostat,Thermal cut-out,Multi-function safety valve,Pressure relief valve,IP Protection: IPX4 or better,Mounting: Wall mounted type,Warranty: Minimum 2 years on product and on tankMake: Havells / Bajaj / Crompton / Racold Note:- Quoted rate Includes providing and fixing necessary inlet and outlet connections PVC Pipes , CP brass nipples, connection to existing water supply line, connection to electrical point, testing and commissioning complete all as specified and directed by Engr-In-Charge. |
| 103 | S & F decorative modular LED Red/Green light surface mounting 3W fixture luminaire for engagement lightcomplete all as specified and directed by Engineer-in-Charge. Make- Bajaj/Havells/Crompton |
| 104 | S & F of decorative wall mounting 1X 9W fixture with frosted glass along with 9W warm white bulb GLS lamp luminaire complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed by Engr-in-charge. (Note-MCBs will be measured separately) |
| 106 | S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable . |
| 107 | S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable . |
| 108 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire. |
| 109 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X1.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1.5 Sq mm as earth lead all as specified and as directed by Engr-in-charge. |
| 110 | Supply and fixing LED luminaire 12 watt, 220 V AC recessed type/surface mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specified below :- Rated Wattage: 12 Watts Input Voltage: 220–240 Volts AC, 50 HzColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approvedProtection: IP20 or betterMake: Philips / Wipro / Havells / CromptonNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 111 | S& F LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and as directed by Engr-in-charge.Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) /Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterMake: Philips / Wipro / Havells / Crompton / Bajaj Note:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 112 | S & F decorative hanging light with GLS lamp surface mounting 6W fixture luminaire complete all as specified and as directed by Engr-in-charge. Make- Bajaj/Havells/Crompton |
| 113 | Supply and Fix wall fan, AC single Phase. 230V of size 400 mm sweep. Oscillation type Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) along with all electrical wire connection all as specified and direceted by Engr-in-charge. Make:Havells/Bajaj/CG. |
| 114 | Supply,Laying,Testing and commissioning cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm x 4 core size all as specified and as directed by Engr-in-charge |
| 115 | S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified and as directed by Engr-in-charge. |
| 116 | S &F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking down old /unserveciable existing pipe complete all as specified and as directed by Engr-in-charge.NOTE : Excavation and earth work shall be measured & paid separately. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 days