|
| 1 | Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 3 | All as per Item no. 2 above but with serviceable bricks obtained from Item No. 1 hereinabove complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and labour for 10 mm thick plastering in cement mortar (1:6) on brick/ concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labour for 10 mm thick rendering in Cement Mortar (1:4) on internal wall surface including dubbing out plaster in Cement Mortar (1:6) of average 10mm thickness & finishing the surface even & smooth without using extra cement including taking down cement plaster of any description on brick or stone walls or in concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement including taking down cement plaster of any description on brick or stone walls or in concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces including dubbing out plaster in Cement Mortar (1:6) of average 10mm thickness & finishing the surface even & smooth without using extra cement using water proofing compound complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately |
| 8 | Material and labour for 15 mm thick plastering in cement mortar (1:6) on brick/ concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer over 3mm thick layer of wall care putty complete all as specified and as directed Make of Distemper: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints/Birla Opus PaintsMake of Putty: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty/Birla Opus Paints |
| 10 | Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer over 3mm thick layer of wall care putty complete all as specified and as directed Make of Distemper: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints/Birla Opus PaintsMake of Putty: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty/Birla Opus Paints |
| 11 | Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India/Birla Opus Paints ( Brand- One True Life) |
| 12 | Material and labour for preparation of undecorated ceiling /wall surfaces and applying 1.5mm wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty/Bila Opus Paints |
| 13 | Material and labour for preparation of new plastered surfaces of wall & applying two coats of cement based paint complete all as specified and as directed by Engineer-in-Charge.Make : Snowcem/Duracem/Aquacem/Berger/Shalimar/ Birla Opus Paints |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Demolition of cement concrete(unreinforcement) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed |
| 16 | Material and labour for 75mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 15mm thick in Cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles |
| 19 | Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 15mm thick in Cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles |
| 20 | Material and labour for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 including scarifying the floor complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles |
| 21 | Material and labour for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles |
| 22 | Material and labour for coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm (or nearest size) , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles |
| 23 | Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any type & any thickness including cover fillets & removing clear off site complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan |
| 25 | Material and labour for granite (of any type & colour as approved ) , 20mm thick, machine cut (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including necessary molding of edges as required at site including grinding and polishing, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed. |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/Tata |
| 30 | Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/Tata |
| 31 | Supply and fix 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed by Engineer-in-Charge.Make-Everest Industries Ltd (EVEREST)/ Charminar Fortune/ RAMCO Indus Ltd (RAMCO) |
| 32 | Supply and fix 6mm thick asbestos cement, 2 piece serrated ridge for corrugated or semi corrugated sheets, fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed by Engineer-in-Charge.Make-Everest Industries Ltd (EVEREST)/ Charminar Fortune/ RAMCO Indus Ltd (RAMCO) |
| 33 | Supply & Fix 1mm thick Plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engr-in-Charge. |
| 34 | Supply and fix 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap in roof, fixed with L type or J type or cranked hook bolts with washer or as per manufacturer's instruction complete all as specified and as directed by Engineer-in-Charge.Make: Everest Industries Ltd (EVEREST) or equivalent |
| 35 | Supply and fix mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples; chains, hand made sliding bolts; clamps, hold fasts; wall ties; hooks for hanging fan, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Material and labour for mild steel work as in wind ties for roof including securing bolts, all necessary drilling, bolting, riveting etc conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge |
| 37 | Material and labour for MS framed work such as grills , gratings, brackets of chajja etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Material and labour for rolled mild steel sections as in joist, channel, angle, or tee sections, fixed independently, without connecting plates etc conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Material and labour for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux/Birla Opus Paints |
| 40 | Material and labour for Preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.Make: Berger paints/Asian paints/Shalimar paints/birla Opus paints |
| 41 | Dismantling of 150mm dia AC/CI/ PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge |
| 42 | Supply and fix UPVC SCH 40, rain water/soil waste/vent pipes , 150m dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge..Make:PRINCE/ Finolex/ Supreme/ HIL Limited (Birla Aircon)/ KSR/ Astral |
| 43 | Supply and fix UPVC bends, 150mm dia. complete all as specified and as directed by Engineer-in-ChargeMake:PRINCE/ Finolex/ Supreme/ HIL Limited (Birla Aircon)/ KSR/ Astral |
| 44 | Demolition of reinforced cement concrete of any description, in any position, not otherwise specifically provided, for wall (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fix mild steel TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work |
| 46 | Supply and fix mild steel TMT bars, 5 to 10mm dia in stirrups, spacers and binder, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work |
| 47 | Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GENote-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge |
| 48 | Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika |
| 49 | Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GENote:(a) New Reinforcement shall be measured and paid separately under respective item.(b) Cost of welding deemed to be inclusive in this item of work. |
| 50 | Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge.Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .Note for Item No.44 to 51:- (i) The work under Item No. 44 to 51 shall be carried out by authorised applicator only.(ii) Defect liability for these items shall be 5 years from certified date of completion.(iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above.(iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority. |
| 52 | Demolition of existing water proofing treatment including cement concrete / cement lime concrete / mud faska (unreinforced in roof and terrace other than ground floor) any description upto the slab top, any thickness and removal of rubbish outside MD land etc complete all as specified and as per directed by Engineer-in-Charge. |
| 53 | Taking down cement plaster of any description on brick or stone walls or in concrete surfaces as in drain etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 54 | Material and labour for providing plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregates mixed with water proofing compound at the rate of 2% by weight of cement as in levelling course, haunching, coping, and similar work, over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc, laid in slope as required, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge.Note: Water proofing compound will be measured and paid separately |
| 55 | Material and labour for 15mm thick rendering on concrete surfaces of roof slab, mixed with water proofing compound, in CM 1:4 finishing the surface even and smooth without using extra cement including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately |
| 56 | Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit Please Enable Macros to View BoQ information |
| 57 | Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit Please Enable Macros to View BoQ information |
