|
| 1 | Demolition of brick work as in walls/parapet wall etc built in any type cement mortar complete all as directed and removing debbries out side MoD land, complete all as specified and directed. |
| 2 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed |
| 3 | Dismantling of timber scantlings unframed 40SqCm and over in section, in any position, complete all as specified and directed |
| 4 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area not exc 1.5 Sqm each, complete all as specified and directed |
| 5 | Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation , shafts ,manholes, etc and not exc 10.00 sqm on plan and not exc 1.5m depth and getting out in any type of soil and including removing the excavated material to a distance not exc 50 metre and depositing & leveling where ever directed, complete all as specified and directed |
| 6 | M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete etc complete all as specified and directed. |
| 7 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM(1:6), complete all as specified and directed. |
| 8 | M&L half brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM(1:4) and providing 2x 8mm dia bars on horizontal surfaces at every 0.6 metre interval, complete all as specified and directed |
| 9 | M&Lfor reinforced cement concrete (nominal mix) Type-B-1 (1:2:4) using 20mm graded crushed stone aggregate) as in foundation, raft footings, foundation beam , plinth beams , bases for columns etc., complete all as specified and directed |
| 10 | M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) Slabs supported on walls, lintle beams, Roof beam and columns in , roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed. |
| 11 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish, complete all as specified & directed. |
| 12 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc. |
| 13 | S& F TMT steel bars 10mm dia and over cut to length bent to shape as required including crancking bending spirally for hooping to columns hooking ends and binding with mild steel wire (annealed) n. less than 0.9mm dia, complete all as specified & directed. |
| 14 | S & F Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complite all as specified and directed. |
| 15 | M&L for Steel work in tubular trusses as per design/special shape provided etc including butt welded tubes confirming to IS-1161-1979 grade St-240, complete all as specified and directed |
| 16 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws, complete all as specified & directed. |
| 17 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws, complete all as specified & directed. |
| 18 | Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified and directed. |
| 19 | Rendering 10 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified & directed. |
| 20 | Rendering 15 mm thick in cement mortar 1: 4 on other than fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified & directed. |
| 21 | Material and labour for preparation of new surface externally of wall and applying 2mm thick wall care puty and Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) without any brush marks on the surface in any colour over a coat of 2mm thick plaster of paris putty to make plastered surfaces even and smooth, complete all as specified and directed. |
| 22 | M&L for hard core with broken stone or boulders of gauge 63 mm but n exc.100mm, deposited spreaded & levelled in layers n.exc 15 cm thick water & rammed to atrue surface,complete all as specified and directed. |
| 23 | M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) 100 mm thick, as in sub base , floor etc complete all as specified and directed. |
| 24 | M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) 75mm thick, as in plinth, sub base , path protection, finished even and smooth with out using extra cement including forming and filling of joints 12mm wide with bituminous filler all as directed at site, complete all as specified and directed. |
| 25 | M&L for plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) 40mm thick, as in flooring, finished even and smooth with out using extra cement, complete all as specified and directed. |
| 26 | M&L for joint free digital Non-skid ceramic tiles on floor of size 600x600x 8 to 10mm thick with 3mm spacer as in floors, set and jointed in neat cement slurry and pointed spacer with appoxy solvent to match with shade of tile laid over and including screed bed or bedding layer 15mm thick in CM(1:4), complete all as specifriedf and directed. |
| 27 | M&L for Coloured digital ceramic glazed tiles on wall 1200x600x 7 to 8mm thick with 3mm spacer as in floors etc. set and jointed in neat cement slurry and pointed spacer with appoxy solvent to match with shade of tile, complete all as specified and directed |
| 28 | S&F 12 mm thick frosted Toughned glass as in hinged doors, partitions , with doors and similar work including cutting to shape, drilling holes as required and fixing arrangements with complete assesaries(Hinges, handle, tower bolt , locking arrangement etc.), complete all as specified and directed. |
| 29 | M&L 18-20mm thick granite (telephonic black) work (table rubbed and polished) in Washbasin counter sunk, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed in CM(1:4) including providing shape/cutting etc and chamfering/rounding the edges, complete all as specified and directed. |
| 30 | S&F in repairs vitreous china counter top wash basin with fixing accessories, oval /rectangular shape white of size 595x420x200, including 32mm brass chromium plated waste coupling(and cast iron brackets incl all fitting accessaries, complete all as specified and directed. |
| 31 | S&F Vitreous China wash down water closet one piece pan (Pedestal pattern), white/colour (including all fitting, fixing bolts, flushing cistern, jet spray and flush pipe), complete all as specified and directed . |
| 32 | S&F SS towel rail 600mm long, complete all as specified and directed. |
| 33 | S&F single lever basin mixer complete all as specified and directed . |
| 34 | S&F angular stop cock fancy type CP, complete all as specified and directed. |
| 35 | S&F toilet paper holder with flat recessed type of stainless steel fixed to wall with chromium plated CP brass screw, complete all as specified and directed |
| 36 | S&F glass shelf 600mm long 125mm wide of CP, complete all as specified and directed. |
| 37 | S&F PVC (SWR) 100mm dia multi floor trap with grating including jointing with solvent cement, omplete all as specified and directed. |
| 38 | S&F 5.5mm thick, 900mmx600mm bevelled edge mirror of slected quality glass, mounted on wall with steel plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 39 | S&F healthfaucet with sparay including CP flexible pipe for EWC fixed, complete all as specified and directed. |
| 40 | S&F Touchless Sensor urinal pot primium quality with automatic flushing accessaries including all fittings and fixtures complete all as speified and directed. |
| 41 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), locking arrangement including 4mm thick glass ,complete all as specified and directed |
| 42 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 43 | S & F of Powder coating of any colour (Thickness of powder coating not less than 50 micron ) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as door stopper (1 No.). hinges type B-21 125mm long (3 Nos.) suitable handles including Mortice locking arrangment including frosted glass in upper pane and ACP sheet in lower Pane .) for each shutter, complete all as specified and as directed. |
| 44 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/wooden frame as in ceiling all as per specifications / drawing, complete all as specified and directed. |
| 45 | S&F 15mm bore GI tubing (medium grade) with all fitting and fixed to wall and ceiling and including taking down old tubing complete all as specified and directed. |
| 46 | S&F 20mm dia GI tubing (medium grade) with all fitting nd fixed to wall and ceiling and including taking down old tubing, complete all as specified and directed. |
| 47 | S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 20 mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors, complete all as specified and directed |
| 48 | S&F 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 49 | S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc complete all as specified and directed. |
| 50 | M&L for fixing of Cobbel stone of size 100 x 100 x 60 mm ( Layout and designed as directed by engr-in-charge ) over 20mm thick screed bed of cement mortar 1:3, incl 75mm thick PCC 1:3:6 and joints filling with cement slurry, cleaning and making good finished surface including demolition of existing PCC, complete all as specified and directed. |
| 51 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 52 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 53 | S&F PVC(SWR) branch piece single equal or unequal 110mm, complete all as specified and directed. |
| 54 | S&F PVC(SWR) branch piece single equal or unequal 75mm |
| 55 | S&F PVC(SWR) bends any radius 110mm, complete all as specified and directed. |
| 56 | S&F PVC(SWR) bends any radius 75mm, complete all as specified and directed. |
| 57 | S&F PVC(SWR) 'S' trap any radius 110mm, complete all as specified and directed. |
| 58 | S&F PVC(SWR) vent cowl any radius 110mm, complete all as specified and directed. |
| 59 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed. |
| 60 | Earth filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 61 | M & L for rendering 15mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and fair without using extra cement & preparation of new plastered surfaces of walls and applying two coats of cement based paint over a chalk white of primer, complete all as specified and directed. |
| 62 | M & L for applying 1 to 2 mm thick white wall care putty to obtain smooth/ even finish syrface using sand paper, complete as specified and directed. |
| 63 | M & L for rendering 10mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement and preparation of new plastered surfaces of walls, apply two coats of oil bound distemper, complete all as specified and directed. |
| 64 | S&F mild roof structural steel angles/ rectangular hollow section/ steel tubular roof trusses (framed), purlines and fastening including distance pieces etc. complete all as specified and directed. |
| 65 | M&L for coloured glazed ceramic tiles of 450X 300X 7mm thick, as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 66 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) dark polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match lid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all specified and directed. |
| 67 | M&L for reinforced cement concrete type B1 1:2:4 (Nominal mix) (using 20mm graded crushed stone aggregate) as in lintel beam / plinth beam complete all as specified anddirected. |
| 68 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, handle, locking arrangement incl half portion 12mm plywood and half portion 12 mm toughened glass etc., complete as all as specified and directed. |
| 69 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, fixed type/sliding type/side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. , complete as all as specified and directed. |
| 70 | M&L 6mm thick Non Asbestos fibre cement /Pre Laminated self embosssed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip, complete all as specified and directed. |
| 71 | M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) 75mm thick, as in sub base , floor etc complete all as specified and directed. |
| 72 | M&L for rubber moulded precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 50mm thick sand cushioning complete all as specified and as directed. |
| 73 | M & L for SFRC Cover 1000x1000x75mm incl angle iron cornering of 75x75x6mm, complete all as specified and directed. |
| 74 | Supply and fixing of angular shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb, complete all as specified and directed. |
| 75 | Supply and fix LED Lamp 9 watt, complete all as specified and directed. |
| 76 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC batten type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, complete all as specified and directed. |
| 77 | Supply and fixing of LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting, complete all as specified and directed. |
| 78 | Supply fixing and comissiong and testing of star rated of electric ventilation exhaust fan of size 300 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall constraction work for installation /fixing of exhaust fan after fan fixing work making good to all diturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface os wall/floor/ceiling etc by cement plastering work, complete all as specified and directed. |
| 79 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc., complete all as specified & directed for the following:- |
| 80 | One light point / exhaust fan point wiring system controlled by one way switch, complete all as specified and directed. |
| 81 | Description all as per serial item No 79 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete all as specified and directed. |
| 82 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed. |
| 83 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed. |
| 84 | Supply and fix ceiling rose , 3 phase/PVC/Polycarbonate, isolated body, complete all as specified and directed. |
| 85 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed. |
| 86 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed. |
| 87 | Supply and fixing LED street light fitting 35 watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp ,bracket wih impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection, complete all as specified and directed. |
| 88 | M & L for bracket made out of GI tubing 25 mm dia,light grade 1.0 mtr long suitable for fixing 25 watt building security light including fixing with MS clamps -2 Nos of flat iron with M.S. nuts, bolts/screw -4 Nos & flat washer 01 No. for each including preparation of steel surfaces and painting with two coats of paint over one coat of red oxide to the M.S clamps & bracket etc., complete all as specified and as directed. |
| 89 | Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size, complete all as specified and directed. |
| 90 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil complete all as specified and directed. |
| 91 | Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. |
| 92 | M&L of locally available river sand in trenches 15 cm below cable and 8cm above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed.Note: - Punned thickness shall only be measured and paid. |
| 93 | M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable, complete all as specified and directed. |
| 94 | S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore, complete all as specified and directed. |
| 95 | S & F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 4 way type 220 volt AC supply system with IP- 43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface, complete all as specified and as directed. |
| 96 | S&F MCB SPN 40 to 63 Amp, 240 Volts, with breaking capacity 10 kA rupturing capacity, 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection, complete all as specified and directed. |
| 97 | S&F MCB SP 06 to 32 Amp, 240 Volt, 10 kA rupturing capacity 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection, complete all as specified and directed. |
| 98 | Supply and fixing recessed / ceiling concealed mounted flate square slim panel integrated design LED luminaire light panel type light fitting of size/type 2 fit x 2 fit of rating capacity in 36W decorative type with high performance LEDs and eletronic driver and mounting slot with long life energy saving complete light fitting set all as per existing fitting type/ size of sample /model and make and required fitting use in both warm/white type colour set complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makong electric connection, complete all as specified and directed. |
| 99 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed . . |
| 100 | Supply and fix automatic high speed motion sensor hand dryer for washroom, 1800watt, 230 volt, 50 Hz, automatic cut off after approx 5-10 seconds to save power complete all as specified and directed. |
| 101 | Supply and lay 3 layer (inner antimicrobial, outer UV stabilied) ISI marked, IS- 15801, PP-R pipes SDR 6 (PN-20) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia. 20 mm, incuding all fittings, complete all as specified and directed. |
| 102 | Supply and fix PPR Gate valves (brass insert) of 20 mm bore, complete all as specified and directed. |
| 103 | Notes :-An amount of Rs 6040.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
