Tender For Certain Misc Comprehensive B/R Repairs To Md And Otm Accn Of Stn Hq,Mh,Sig Coy,Mdc,Ad Bde Under Ge (Army) Baroda.
Tender Value
12 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Misc Comprehensive B/R Repairs To Md And Otm Accn Of Stn Hq,Mh,Sig Coy,Mdc,Ad Bde Under Ge (Army) Baroda.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each complete. |
| 2 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each complete. |
| 3 | S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification.The door frame shall be tied to the wall using 75/100mm long MS screw as directed. |
| 4 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement. |
| 5 | S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 6 | Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 7 | M & L for 100 mm butt hinges stainless steel grade 202, 14 gauge thickness medium weight fixed with pressed steel door frame / pvc door frame with screws. |
| 8 | S&F 300 mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed. |
| 9 | S&F 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed. |
| 10 | S & F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified. |
| 11 | S & F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed, all as specified. |
| 12 | S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 13 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 14 | M & L for 5.5mm thick sheet glass, exc 0.5 Sqm ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed. |
| 15 | S&F in repairs 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to frame work complete. |
| 16 | S&F in repairs aluminium (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete. |
| 17 | S & F in repairs double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed. |
| 18 | S&F for Framed work as in doors or gates or grill/grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specifed and directed. |
| 19 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. |
| 20 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. |
| 21 | M & L for Hacking out old broken glass Exc 1.5 sqm (any thickness, size, quality or description) from wooden/steel/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 22 | S & F 4.00mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 23 | S&F 100 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 24 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc and M & L for brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 all as specified and directed. |
| 25 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete |
| 26 | M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement all as directed. |
| 27 | M & L for rendering 5mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) |
| 28 | M&L Rendering in two layer on fair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instruction for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 smooth without using extra cement (WPC will be measured separately). |
| 29 | Supply only Integral water proofing compound |
| 30 | M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling. |
| 31 | M & L for preparation of new plastered surface of wall and applying three coats of white wash all as specified. |
| 32 | M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 3 mm average thick birla/equivalent wall care putty and one coat of chalk whitening primer |
| 33 | M&L for preparing new plastered surfaces of wall and applying two coats cement base paint over a coat of chalk whitening primer. |
| 34 | M & L for preparing old plastered surfaces of wall and applying two coats cement base paint over a coat of chalk whitening primer on external wall. |
| 35 | M & L for preparing old plastered surfaces of wall and applying two coats of oil bound distamper over and including coat of chalk whitening primer. |
| 36 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) |
| 37 | M&L for 75 mm thick PCC 1:4:8 mix ,type D-2 Using 40 mm graded stone aggregate finished even and fair without using extra cement as in sub base of path/hard standing |
| 38 | M&L for Machine pressed, precast plain cement concrete Interlocking paver block, factoty made( with grey cement and no pigment) conforming to IS-15658-2006, 60mm thickness laid over and including 25 mm average thick sand cushioning layer & joints filled with sand in hardstanding etc, fabricated with M-35 grade concrete, complete. |
| 39 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 40 | M&L for non skid colour ceramic tile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match screed bed or bedding layer of mortar including 15mm thick for laying floor finishes with CM 1:6. |
| 41 | M&L for non skid colour ceramic tile 7 to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles. |
| 42 | M&L for coloured (of any shade) vitrified ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor fiishes with CM 1:6 complete. |
| 43 | M&L for coloured (of any shade) vitrified ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tile n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles. |
| 44 | M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles. |
| 45 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base 15 mm thick screed bed in cement morter1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 46 | M&L for machine cut kota stone slab 20 - 25mm thick in skirting, riser etc set over and including high performence adhisive manufactured by somani ezifix tile adhisive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles complete. |
| 47 | M & L chequered cement concrete tile 20cm x 20cm x 25mm thick with grey colour and pigment set and jointed in neat cement slurry including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:6 |
| 48 | Material and labour for grinding and polishing of terrazzo floor with machine. |
| 49 | All as per item above but in skirting/dado (grinding/ polishing by hand). |
| 50 | Polishing of old existing Kota stone flooring i.e, cutting , grinding, joints pigment filling and polishing to get mirror finish all as specified and directed. |
| 51 | All as per item above but in skirting/dado (grinding/ polishing by hand) |
| 52 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed. |
| 53 | S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 54 | S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/cladding ridge or hips, valley gutter to wall, fixed with self tapping screws as specified. |
| 55 | M & L for mild steel work confirming to Fe-290 Gde E-165 in angle iron posts & struts for shed and for grills including cutting top to shape as directed, drilling holes, notching for wire, etc. and including flat iron filletes for securing wire mesh or fence etc. including all necessary bolting riveting etc complete. |
| 56 | M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 57 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 58 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 59 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 60 | S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 61 | M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete type B1, 1:2:4 for 75mm bore. |
| 62 | S&F in repair 600mm x 450mm beveled edge mirror 5 mm thick of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading. |
| 63 | S & F in repairs plastic seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device |
| 64 | S & F in repairs Vitreous China wash down water closet pan pedestal pattern (Europian type) (excluding flushing cistern and flush pipe) plastic seat black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. |
| 65 | S&F in repairs Vitreous China wash down water closet (Squat pattern ) white complete as fixed in repair excluding flushing cisternand flush type \\"Orrisa\\" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete including joint between flushing pipe and socket of WC. |
| 66 | S & F in repairs PVC valvless syphonic action flushing cistern low level white of 10ltrs capacity with inlet ball valve float and handle including bracket. |
| 67 | S&F in repairs health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 68 | S&F in repairs PVC connection 600mm long of dia 15mm complete. |
| 69 | S&F in repair Vitreous China wash hand basin, angle back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including CI bracket and nut bolts as per maufacturers instructions. |
| 70 | S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1m not exc 2m complete. |
| 71 | S&F in repair SS waste coupling of 32mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed. |
| 72 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided and M & L for reinforced cement concrete1:2:4, type B1, using 20 mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span. |
| 73 | Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc |
| 74 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 75 | M & L for mild steel TMT bars 6mm to 8mm dia, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 76 | M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required, including a coat of Epoxy bonding agent of Dr Fixit/FOSROC/PIDILITE to old concrete/Cement surface and applying three coat of white wash/two coat of cement base paint to match with the existing surface complete all as specified and directed by the Engr- in -Charge. (Reinforcement will be measured and paid saperately under respective item). |
| 77 | S&F in repairs 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 78 | S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 79 | S&F in repairs 110 mm dia PVC (SWR) bends of any radius with access door complete |
| 80 | S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete. |
| 81 | S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed |
| 82 | S & F tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed |
| 83 | S&F in repairs including disconnecting tanks, 1000 ltrs rotational moulded double layred, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. |
| 84 | S&F in repairs including disconnecting tanks, 500 ltrs rotational moulded double layred, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. |
| 85 | S&F disconnecting existing tanks exc 250 ltr but n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 86 | S&F disconnecting existing tanks exc 500 ltr but n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 87 | S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed. Make : Prayag & equivalent. |
| 88 | All as per item above here in before but 25mm dia complete all as specified and directed. Make : Prayag & equivalent. |
| 89 | S&F in repairs 15mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle for iron pipe |
| 90 | S&F in repairs, bib taps fancy type chromium plated 15mm bore cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 91 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capston heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 92 | S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs, washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete. |
| 93 | S&F in repairs chromium plated shower rose with or without swivel joints any size, including fixing to GI pipe for 125mm dia complete all as specified & directed. |
| 94 | S&F in repairs brass CP hand mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. |
| 95 | Supply and fixing CP Centre hole Wash Basin mixer three in One 15 mm bore pipe complet all as specified. |
| 96 | S&F in repairs, towel rail 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. |
| 97 | Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non destructive, waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed . The PU foam shall have 100% solids and solvent free and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. |
| 98 | S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 99 | M & L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete |
| 100 | Supply & Fixing of stainless steel wall mounted plate rack of size 900x1200X 300 mm and thickness of sheet not less than 0.50mm with provn for keeping plates and other crockery fixed with screw and rawal plug etc on wall complete all as specified and as directed |
| 101 | M & L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:6,grinding and polishing complete |
| 102 | S & F for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. |
| 103 | S & F for 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut ,mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats. |
| 104 | S&F in repairs Vitreous China urinal full stall type white (excluding flushing cistrern, flush pipe and waste pipe). |
| 105 | S&F in repairs Vitreous China urinal half stall type white (excluding flushing cistrern, flush pipe and waste pipe). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 25, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender