|
| 1 | [13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate] |
| 2 | [13.32]Providing and fixing bolts including nuts and washers complete. [Through Rate] |
| 3 | [23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA [Through Rate] |
| 4 | [23.22.5.2]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.2. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Single Pole [Through Rate] |
| 5 | [23.23.6..2]MISCELLANEOUS 6..2. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 200 X 50 X 2 mm [Through Rate] |
| 6 | [23.23.7.2]MISCELLANEOUS 7.2. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 200 X 50 X 2 mm [Through Rate] |
| 7 | [23.27.3]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 3. M.S. pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level , having a base of size 1050 mm x 600 mm x 250 mm below ground level . 0 0 [Through Rate] |
| 8 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate] |
| 9 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate] |
| 10 | [24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate] |
| 11 | [24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate] |
| 12 | [24.14.48]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 48. 50 Sq mm 4 core (Arm.) [Through Rate] |
| 13 | [24.14.82]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 82. 185 Sq mm 3.5 core (Arm.) [Through Rate] |
| 14 | [24.2.8.12]LT CABLE 8.12. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 185 sqmm [Through Rate] |
| 15 | [24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate] |
| 16 | [24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm [Through Rate] |
| 17 | [24.3.7.3]HT CABLE 7.3. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required : 240 to 400 sqmm [Through Rate] |
| 18 | [24.3.8.2]HT CABLE 8.2. Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required : 185 to 300 sqmm [Through Rate] |
| 19 | [24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate] |
| 20 | [27.3]Plastering (12 mm thick) with cement mortar (1:3 ) on brick work in sub-structure as per MoRTandH Specifications 1300 & 2200 [Through Rate] |
| 21 | [6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate] |
| 22 | [7.20.1]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate] |
| 23 | Supply and erection of PCC pole 9 mtr long as per IS: 1678-1960 specifications, 105mm x 115mm at top and 105mm x 315mm at bottom with working load of 200 Kg. buried 1.80m in ground or as per DHBVNL specification. (Rate without GST) |
| 24 | Supply and erection of PCC pole 11 mtr long as per IS: 1678-1960 specifications, 140mm x 200mm at top and 140mm x 400mm at bottom with working load of 400Kg buried 2.20M in ground or as per DHBVNL specification (Rate without GST) |
| 25 | Supply and erection of 300 Sqmm single core cable un-armored made out of aluminum conductor, 650/1100 Volt confirming to ISS 1554(Part-I) of 1988 IS: 7098/Part-1/1988 with latest amendments and complete in all respect up-to the entire satisfaction of Engineer-in-Charge of the Work. (Rate Without GST).Make – Havells/KEI/Polycab |
| 26 | Supply, Stringing and Sagging 8 SWG G.I. Earth wire complete in all respect to the entire satisfaction of Engineer-in-charge conforming to IS 298/1978 and 7807/1973 and with latest amendment thereof. (Rate without GST) |
| 27 | Supply and erection of Cradle guard for L.T. Line made out of 8 S.W.G. G.I. wire and guard reel complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 28 | Supply and erection of fuse unit of L.T. side suitable for 25 kva to 200 KVA transformer complete with wooden board, aluminum strips, MS clamp and nut and bolts including all petty material required up-to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 29 | Supply and erection of ACSR conductor of size 80 sqmm (Raccoon) conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 30 | Supply and erection of Anti climbing barbed wire of size 12x12 gauge (6.33 Mtr. = 1.00 kg) for 11 KV/33KV Poles complete in all respect. (Rate without GST) |
| 31 | Supply and erection of 10 sqmm single core copper cable, with bright annealed electrolytic bare copper conductor for voltage grade 1100 volts, PVC insulated, unsheathed industrial multi strand cable, Flame Retardant, Lead Free (FRLF) confirming to IS-694:2010 complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. (Rate without GST) Make- Polycab/ Havell’s /KEI |
| 32 | Supply and erection of P.G clamp made out of aluminum die cast with nuts and bolts suitable up to 100 Sqmm ACSR conductor complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. (Rate without GST) |
| 33 | Supply and erection of 63 Amps connection plate 4 pole for incoming and outgoing cable fitted with connector fixed on Bakelite sheet complete with nut and bolts complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. (Rate without GST). |
| 34 | Supply and Erection of M.S. D-strap made out of M.S Flat of size 40 x 6mm suitable for LT insulator 90mm x75mm with latest amendments complete in all respect up to the entire satisfaction of Engineer-In-Charge. (Rate without GST). |
| 35 | Supply and Erection of shackle insulator brown glazed of size 90 mm x 75 mm suitable for 415 /240 Volt confirming to IS 1545/1977 with latest amendment thereof complete in all respect up to the entire satisfaction of Engineer-In-Charge. (Rate without GST). Make- as approved by DHBVN |
| 36 | S/E of 25 Watt LED Street Light Luminaries with multiple highly efficient LED’s, with individual lens, with reflector, Pressure die cast aluminum housing, heat resistant, enclosed in Poly carbonate/toughened glass IP-66, having light efficacy 120 Lumens/watt of complete in all respect as per specifications attached complete up to the entire satisfaction of Engineer -in-charge of the work. (With 3 years free replacement warranty at site including labour charges free of cost). (Rate without GST).Make:-Bajaj/Philips/ LT |
| 37 | Supply and erection of 25 mm dia G.I. pipe bracket 1.0 mtr long made out of 25 mm nominal dia (B-class) suitable for street light fitting including 2 nos. Clamps of M.S. Flat size 50x6mm, 6 nos. Nutt and Bolts of size 50x16mm with application of primer and painting complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST). |
| 38 | Supply and erection of 2.5 sqmm 3 core aluminum flexible cable PVC insulated and sheathed core round/flat cable 1100 volts each core having single solid aluminium conductor as per IS: 694, complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. (Rate without GST). Make – Havells/ polycab/ KEI or make approved by DHBVN |
| 39 | Supply and erection of cable holding wooden cleat set with single grove suitable to hold cable of size 50 sqmm to 400 sqmm, made out of best quality of wood to withstand the load tension of cable and outdoor atmosphere complete with all labour and material complete in all respect. (Rate without GST) |
| 40 | Supply and erection of 30 sq mm PVC insulated ACSR conductor conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 41 | Supply and erection of L.T. PVC spacer spiral type, a set of 3 nos. spacers, for L.T. lines to maintain proper gap between the ACSR conductor complete with material and labour required to complete the job as per the entire satisfaction of the Engineer-in-charge. make - as per DHBVN (Rate without GST) |
| 42 | Supplying and erection of 33 KV lighting arrestor set (L.A. Set) single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanized clamping arrangement, G.I. bolts, nuts, washers etc. as required complete in all respect as per DHBVN latest specifications (Rate without GST). Make :- As per list attached |
| 43 | Supply and Erection of 36 KV isolator switch ( L and E Type) suitable for 33 KV Line complete in all respect with all accessories as per approved design and specification of DHBVN up to the entire satisfaction of Engineer-in-charge ( Rate without GST). Make:- As per list attached |
| 44 | Supply and erection of 33 KV Disc insulator polymer type as per DHBVN latest norms, and as per the entire satisfaction of Engineer-in-charge. (Rate without GST) |
| 45 | Supply and erection of 33 KV Pin Insulator polymer type as per DHBVN latest norm, and as per the entire satisfaction of Engineer-in-charge. (Rate without GST) |
| 46 | Supply, erection, testing, commissioning and energization of Ring main unit (RMU) non extensible, 3 way CVV type of 36 KV voltage level and for use at 33 KV voltage level, outdoor type, rated current carrying capacity of Vacuum Circuit Breaker 630Amp, 3 way, short time withstand current 26.3KA/3sec, 65.75 short circuit making current, degree of protection of main tank- IP67, SF6 type, 2.5 cycle opening time and 3 cycle closing time including the cost of power pack, all types of control cables, 33 KV touchproof termination kit of make Raychem, suitable 33 KV touch prof boots, making of holes of suitable for 300 sqmm x 3 core TR XLPE cable, filling of gaps with M seal including all material and labour charges complete in all respect upto the entire satisfaction of engineer in charge of work , specification as per approved GTP of DHBVN complete in all respect. Make as per list attached |
| 47 | Supply and erection of Cable route marker made out of RCC with cement concrete ratio 1 : 1.5 : 3 having height 36 inches, thickness 6 inches, width 12 inches, priming and painting of color selected by Engineer-in-charge, engraving of words as per description provided by department complete as per entire satisfaction of Engineer-in-charge complete in all respect. (Rate without GST) |
| 48 | Supply and erection of 150 mm dia. G.I. pipe (medium class) including sockets on both ends for dismissing of sharp edges for protection of cable complete in all respect as per entire satisfaction of engineer-in –charge. |
| 49 | Supply and erection of L.T. stay set for LT Line complete in all respect with G.I. stay wire( rope of 7 wires of 8 SWG G.I. Wire), egg/Disc insulator , G.I. with rod of 20 mm dia, 6 feet long, threaded up-to 250 mm long with nut (approx weight 6.224 kg) with cross of angle of 450mm each made out angle of size 65x65x6 mm(weight 5.33 kg), elbow (weight 2.24 kg ) complete with clamps , nuts and bolts complete in all respect up-to the entire satisfaction to Engineer-in-Charge of the work. (Rate without GST) |
| 50 | Supply and Erection of Structure for 36 KV isolator switch (L and E Type) with complete material excluding poles suitable for 33 KV Line complete in all respect with all accessories as per approved design and specification of DHBVN up to the entire satisfaction of Engineer-in-charge (Rate without GST). Make: - As per list attached |
| 51 | Supply only of HDPE pipe PE63, PN4 of size 160 mm dia for use in trenchless boring as per IS4984, ISO: 4427 and suitable for electrical cables complete in all respect up to the entire satisfaction of Engineer-in-Charge. Make: - as per list attached (Rate without GST) |
| 52 | Laying only of HDPE pipe of size 160 mm dia by using of trenchless technology 1.5 meter below ground level including scanning of underground services before laying the pipe for protection of the existing services like underground cable, gas pipe, water pipe, oil pipe, sewerage pipe or any other service (excluding the cost of HDPE pipe) complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST) |
| 53 | Providing and fixing 1.8 meters high G.I. wire mesh fencing with wire mesh made out of 8 SWG/4.0 mm G.I. wire of size 50mm x 50 mm, with2.50 meter angle iron posts 50 mm x 50 mm x 6 mm placed every 1.0 meters center to center founded in M15 grade cement concrete 0.7 meter below ground level, and 2 nos. horizontal angles 1.5mtr long and vertical flats 50mm x 6 mm of length 1.8mtr, 2 nos. horizontal channel 1.5mtr long with one entry gate of 1.0 mtr wide and 2.0 mtr.High, including priming and painting complete with all material, labour, welding, machinery charges complete in all respect up to entire satisfaction of engineer in charge of work (Rate Without GST) |
| 54 | Supply and Erection of danger plate with clamp including priming and painting of coulor selected by Engineer-in-charge, writing of words as per description provided by department in at least two languages and symbol of danger complete as per entire satisfaction of Engineer-in-charge complete in all respect. (Rate without GST) |
| 55 | Supply erection, testing, commissioning and energization of 400 KVA Transformer, Copper wound, having primary voltage 33 KV and 11 KV both options and Secondary voltage 0.433 KV, with off load tap changer, oil filled, 3 phase 50 Hz, copper double wound, Oil Immersed, Naturally Cooled, Core type transformer with latest ISI/IS Standard and as per DHBVN latest approved Specifications/GTP/ Drawings. The foundation should be as per approved by manufacturer. (Rate without GST). Make as per list attached. |
| 56 | Supply and erection of G.I. strip of size 35 mm x 5 mm made out of hot dipped galvanized flat as earth electrode for use of earth electrode for Chemical earhings/ Pipe earthing/ plate earthing complete with G.I nuts, bolts, washers including welding charges and labour charges. (Rate Without GST) |
| 57 | Supply and erection/ laying of 33 KV HT cable of size 300 sq mm x 3 core, aluminium conductor, Tree Retardant XLPE insulated (TR-XLPE), cable with latest IS/ISI Standards, as per DHBVN approved specifications/ GTP/drawings of DHBVN department, ISI marked, laid in existing pipe/trenches/ surface with all labour and material required to complete the job in all respect up to the entire satisfaction of engineer in charge of the work. (Rate without GST) Make: - As per list attached Please Enable Macros to View BoQ information |
