|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Dismantling of floor, hearth or wall tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 3 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed. |
| 4 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete. |
| 5 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 6 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm in vertical surface such as skirtings, dados etc set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 7 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 8 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for glazed ceramics coloured tiles of size 450x300x7mm thick in vertical surfaces such as skirting/dados/wall, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 10 | Demolition stone slab and tiles of any description or thickness in floors, dado/skirting and apron etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 11 | M & L For Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed or bedding layer in cement mortar 1 : 6 complete all as specified and directed. |
| 12 | M & L For Machine cut kota stone slab flooring 20-25mm thick in riser of steps Skitting dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick rendering in cm 1 : 4 on vertical surface as backing coat of wall tile complete all as specified and directed. |
| 13 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 14 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 15 | Same as item No 14 above but except bricks. |
| 16 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall. |
| 17 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in fdn, sub base, mass concrete & cinder concrete etc complete all as specified and directed. |
| 18 | M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection/ flooring etc finishing even & smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc all complete all as specified and directed. |
| 20 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 22 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed.Note : Liquid WPC will be measured and paid separately. |
| 23 | M&L rendering 10 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed. |
| 24 | Supply only water proofing compound (liquid), ISI marked. |
| 25 | Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 26 | Same as above item No25 but exc 1.5 Sqm but n.exc. 4 Sqm each. |
| 27 | Taking down shutter of any description exc 1 sqm and n exc 2 Sqm each and removing to store. |
| 28 | Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete all as specified and directed. |
| 29 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed. |
| 30 | S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed. |
| 31 | S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 32 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 33 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 34 | S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed. |
| 35 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. |
| 36 | S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed. |
| 37 | S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 38 | M & L for plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and directed. |
| 39 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 40 | Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 41 | S&F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, complete all as specified and directed. |
| 42 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 43 | S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed. |
| 44 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long. |
| 45 | S&F mild steel, 300 mm long ordinary rat tail rod pattern spring incl roller and roller plate complete all as specified and directed. |
| 46 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section as specified. |
| 47 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 48 | S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 49 | S&F150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 50 | S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 51 | S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. |
| 52 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 53 | S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 54 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed. |
| 55 | S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 56 | S& F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 57 | S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 58 | Pressed steel frames for cup board chowkats of size 60x40mm of 1.25mm thick with one or more rebates including necessary fixing lug, hold fasts, butt hinges etc,complete including taking down old cub board frame complete all as specified and directed. |
| 59 | S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves complete all as specified and directed. |
| 60 | S&F, in repair, Hardwood 2nd class boarding, 30mm thick planed both side , fixed in shelves, partitions and shelves of built-in cupboards, almirah, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and directed. |
| 61 | S&F Hasp and staple, mild steel, safety type, stove enameled black, including bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed. |
| 62 | S&F in repair continuous (piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 63 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 64 | S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 65 | S&F mild steel Bracket with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 66 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia. |
| 67 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. |
| 68 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia including cutting /chasing in walls etc. complete all as specified and directed. |
| 69 | S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting/ chases in wall complete all as specified and directed. |
| 70 | Fixing only 15 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, complete all as specified and directed. Note:- Old pipe retrived from srl item No. 66 shall be used. |
| 71 | Fixing only 20 mm bore galvanised steel water tubing medium grade with and including all new fittings and fixed to walls and ceilings or laid under floors, complete all as specified and directed. Note:- Old pipe retrived from srl item No. 67 shall be used. |
| 72 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 73 | S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 74 | S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 75 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. |
| 76 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 77 | S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 78 | S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed. |
| 79 | S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 80 | S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed. |
| 81 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 82 | S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 83 | S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. |
| 84 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. |
| 85 | S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 86 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed. |
| 87 | S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. |
| 88 | S&F PVC (SWR) 'P' trap for 110 mm dia complete all as specified and directed. |
| 89 | M&L for RCC as in kitchen platform, shelves & chajjas etc 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed. |
| 90 | M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 91 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips. |
| 92 | Taking down AC/PVC pipes, any type (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75mm dia pipe. |
| 93 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed. |
| 94 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 95 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed. |
| 96 | S&F PVC (SWR) pipes 50mm bore single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed. |
| 97 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 98 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed |
| 99 | S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed. |
| 100 | M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed. |
| 101 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed. |
| 102 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed. |
| 103 | S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI marked) complete all as specified and directed. |
| 104 | Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs complete all as specified and directed. |
| 105 | Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 106 | S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres complete all as specified and directed. |
| 107 | S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity complete all as specified and directed. |
| 108 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 109 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed. |
| 110 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 111 | M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 112 | M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 113 | Material and labour for preparation of new plastered or unplastered surfaces of walls and distempering with two coats of oil bound distemper white or tinted over & including Chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 114 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 115 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 116 | Preparing surface of sunken slab and applying 15 mm thick cement plaster in 1:4 cement sand mortar mixed with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified. Note: LWPC will be measured and paid separately under respecive item. |
| 117 | M&L PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in sunken slab filling complete all as specified and directed. |
| 118 | Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets. |
| 119 | S&F Gl frame work powder coated for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and size of grid 605mm x 605mm for false ceiling complete all as specified and directed. |
| 120 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 121 | M & L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre 8 mm thick for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) |
| 122 | Cleaning, removing all scale, dust, dirt and elgy using with wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black/white paint on white/black base on tank \\"Tank cleaned on ____ Dt_____\\". Capacity 500 Ltrs complete all as specified and directed. |
| 123 | Same as item No 122 above but of capacity 1000 litres. |
| 124 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed. |
| 125 | Supplying and laying of CPVC pipes (20 mm outer dia) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 126 | S&F in repair 15mm bore chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed. |
| 127 | S&F in repair 15mm bore chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed. |
| 128 | S&F in repair vitreous pedestal china for WHB suilable for WHB of size 550x400 mm complete all as specified and directed. |
| 129 | S & F Vitreous china wash down water closet pan (pedestal pattern ) floor mounted cascade type of size 370 x 670 x 720 mm Bowl for coupled WC with UF soft close slim seat cover, and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified and directed.(Make : Jaquar cat part no LYS-WHT-38851 or Equivalent in CERA/Hindware) |
| 130 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 131 | S&F repair vitreous china urinals bowl type flat back, size 465 x 355 x 265 mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe. |
| 132 | S&F in repair chromium plated health faucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete. |
| 133 | S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed. |
| 134 | S&F in repair Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make- CERA or equivalent as approved by GE |
| 135 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed. |
| 136 | S & F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 137 | S&F PVC (SWR) branch pieces, single (equal or un equal) ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed. |
| 138 | Same as above item No.137 but 75 mm bore |
| 139 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 140 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 141 | M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |