|
| 1 | Rates are exclusive of GST |
| 2 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 3 | Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 4 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 5 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 6 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 7 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB LT/AL |
| 8 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 9 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 10 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). |
| 11 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 12 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 13 | Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 14 | Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT |
| 15 | Supply Installation, Testing, and commissioning 6-meter decorative lighting pole is designed for street lighting, landscape illumination, gardens, pathways, and public outdoor environments, offering both functional and aesthetic appeal. The pole is manufactured using a conical steel structure, protected through a hot-dip galvanized process for enhanced corrosion resistance, and finished with a robust PU paint coating for long-term outdoor durability. The pole includes aesthetically designed decorative laser-cut sections that enhance its appearance. The total pole height is 6 meters and the structure is fabricated with varying cross-sections to suit the decorative elements. The pole is designed to be installed using four 16 mm diameter foundation bolts of 600 mm length, which are required for installation but are not included in the manufacturer’s supply scope. Decorative illumination is enhanced through an integrated 3000K, IP-67-rated LED strip suitable for outdoor weather conditions. All nominal dimensions are in millimeters, with a tolerance of ±25 mm in length and ±5% in thickness. Structural stability and the fitment of post-top luminaires must be verified by the customer or installation contractor. Foundation bolts, nuts, washers, loop-in loop-out connectors, Bakelite sheets, and MCBs do not fall under the supplier’s scope and must be arranged separately. The manufacturer should have his own dedicated manufacturing unit to ensure consistent quality, proper process control, and adherence to technical standards, and must submit the General Arrangement Drawing (GAD) along with the structural calculation of the pole for approval. |
| 16 | SITC of Vertical Jet of 20 meters high with the following components : Vertical Jet AF (65-20) SS304/Brass : 1 noManifold 300mm dia in SS 304 for a single V jet nozzle and multiple pumps: 1 noSS pipe 75 NB '3' :- 3 nos Floating System with the following components 1.2mm SS304 frame set with 2nos. 2m size uPVC floats :-1 noConcrete anchors for the folating system with unbreakable belts: -2 nosLights with the following components Submersible IP68 LED Colour change lights 54 Watts (18W x3 LED with SS plates) :- 6 nosPower Supply 24VDC/18.8 Ampere:- 1 noSS Light stand 6-way SS304 custom-made :- 1 noControl Module 12V 50/A (RGB Color Changer):- 1 noPumps with the following components 15HP submersible, 3-phase: 1 noControl Panels with the following components Control Panel with Amp. and Volt meter, push buttons, isolator, indicators, panel incomer with MCBs and neutral link, Starter with Contactor, O/L relay, Single phase preventer etc. (Panel equipments should be from reputed makes like L&T, Heger, Lmex, Rishabh, FTC, ELBEE, Slazer, Schneider,Dowells, Jainsons, HSS, SG, Siemens, etc.) :- 1 noWires 2.5 sq mm 4 core double PVC sheathed copper cable:- 100 meter6 sq mm 3 core double PVC sheathed copper cable:- 200 meter Earthing and other work Earthing and other related work to complete the fountain :-1 no |
| 17 | SITC of 13 Meter and 7-meter high fountains to enhance the lake with the following components: Vertical Jet AF (50-15) SS304/Brass :-6 nosVertical Jet AF (65-20) SS304/Brass:- 1noManifold 300mm dia in SS 304 for a single V jet nozzle and multiple pumps :- 1 noBrass Valve 50 mm:- 6 nosBrass Valve 65 mm:- 1 noSS pipe 75 NB '3':- 3 noFloating System with the following components1.2mm SS304 frame set with 2nos. 2m size uPVC floats:-1Concrete anchors for the floating system with unbreakable belts: 2 nosLights with the following componentsSubmersible IP68 LED Colour change lights 54 Watts (18W x3 LED with SS plates) :- 6 nosPower Supply 24VDC/18.8 Ampere: 1 noSS Light stand 6-way SS304 custom-made:-1 noControl Module 12V 50/A (RGB Color Changer) :-1 no Pumps with the following components: 20HP submersible, 3-phase:- 1 noControl Panels with the following componentsControl Panel with Amp. and Volt meter, push buttons, isolator, indicators, panel incomer with MCBs and neutral link, Starter with Contactor, O/L relay, Single phase preventer, etc. (Panel equipments should be from reputed makes like L&T, Heger, Lmex,Rishabh, FTC, ELBEE, Slazer, Schneider, Dowells, Jainsons, HSS, SG, :- 1 no Wires:2.5 sq mm 4 core double PVC sheathed copper cable 100 mtr6 sq mm 3-core double PVC sheathed copper cable:- 200 mtr Earthing and other workEarthing and other related work to complete the fountains :-1 no |
| 18 | Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps) |
| 19 | Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 20 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per of steel,, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). |
| 21 | Supply Installation, Testing, and commissioning of FLOATING LOTUS-SHAPED SOLAR AERATOR : The 3hp aerator is a solar-powered solution designed to improve water quality in lakes and ponds, powered by a 6.5 KW system of floating solar panels. Mounted on a specially developed floating structure, this system supports both the solar panels and the suspended underwater aerator, ensuring optimal performance. The aerator is uniquely designed in the shape of a lotus, enhancing the aesthetics of the waterbody, and features LED lights powered by solar energy that illuminate the structure at night. Customizable to meet specific requirements, this eco-friendly aerator combines functionality, sustainability, and visual appeal. model-v lite Salient Features: 1 . Solar Powered Efficiency 2. Customizable Design 3. Special Floating Structure 4. Environmentally Friendly 5. Aesthetic Lotus Design 6.Versatile Application 7.Nighttime Illumination 8. Innovative Technology TECHNICAL SPECIFICATIONS, Build: Galvanized MS Structure | FRP Petals & Floaters , Anchoring & Fixing: Anchored to Bottom, Diameter: ~ 30 ft. (Customizable), Weight: 1300-1500 kgs, Aerator Horse Power: 3 HP, Aerator Type: Submersible Jet Scorpion Aerator, Floating Solar Panel Capacity: 6.5 KW , LED lights: 24 (Customizable) |
| 22 | Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 23 | Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 24 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 25 | Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 26 | Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV |
| 27 | Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 28 | Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 29 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 30 | Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW |
| 31 | Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW |
| 32 | Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50 including driver with 1 year warranty. |
| 33 | Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty. |
| 34 | Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 3000K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 35 | Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. |
| 36 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 37 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 38 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB |
| 39 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 40 | Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 41 | Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 42 | Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 43 | Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 |
| 44 | Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CPBB |
| 45 | Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 6 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs) |
| 46 | Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 6 way outgoing or 400A incoming and 4 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB. |
| 47 | Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB. Note:- 1) For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 pole MCCB. |
| 48 | Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 200A erected on angle iron /GI frame approved make complete. |
| 49 | Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB |
| 50 | Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. |
| 51 | Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 52 | Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. |
| 53 | Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. |
| 54 | Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 55 | Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 56 | Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8) |
| 57 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB. Please Enable Macros to View BoQ information |
